Home / ubuntu / Questions / 107883
Accepted
Zeophlite
Asked: 2012-02-27 02:57:12 +0800 CST

How to use a Eaton 3S 700VA UPS with Ubuntu Server?

  • 772

I have an Eaton 3S 700VA UPS connected to my modem, QNAP TS-412 and an Ubuntu Server. The Eaton's USB connection goes into my Ubuntu Server.

I was wondering what software is the best for managing power interruptions. Specifically, I want to get the Ubuntu Server to tell the QNAP to shut down when there is no power, send an email to my gmail, and shutdown.

server ups

2 Answers

  1. Best Answer

    The usual package used to monitor a UPS is Network UPS Tools, which is packaged in Ubuntu as nut. Your model is listed as supported through the usbhid-ups driver on their website.

    Among other features, NUT includes a client/server architecture that lets one machine make the UPS status available over the network. This is useful in cases where you have a single UPS powering multiple machines, as in your situation.

    • 6

  2. Here's the commands I used to setup nut for my Eaton 3s 700VA UPS on Ubuntu 12.04.

    sudo apt-get install nut

sudo vim /etc/nut/ups.conf
    [Eaton3S]
    driver=usbhid-ups
    port=auto

sudo vim /etc/nut/upsd.users
    [upsmon]
    password = pass
    upsmon master

sudo vim /etc/nut/upsmon.conf
    MONITOR Eaton3S@localhost 1 upsmon pass master

sudo vim /etc/nut/nut.conf
    MODE=standalone

sudo service nut start

sudo upsc Eaton3S

    To have the modem shutdown and and have an email sent to yourself you'll need to write a bash script and edit SHUTDOWNCMD "/sbin/shutdown -h +0" in /etc/nut/upsmon.conf

    • 4