Home / ubuntu / Questions / 1134101
Accepted
Rafael Cordano
Asked: 2019-04-16 05:56:35 +0800 CST

TP-LINK Archer T3U not working in Ubuntu 18.04

  • 772

I recently acquired the TP-LINK Archer T3U. I tried several solutions, but it still does not work. I tried with https://github.com/cilynx/rtl88x2BU_WiFi_linux_v5.3.1_27678.20180430_COEX20180427-5959/ and https://github.com/jeremyb31/

Results of sudo lshw -class network :

 *-network                 
       description: Ethernet interface
       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       information del bus: pci@0000:03:00.0
       logical name: enp3s0
       version: 0c
       series: e0:3f:49:53:74:00
       size: 10Mbit/s
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168g-2_0.0.1 02/06/13 latency=0 link=no multicast=yes port=MII speed=10Mbit/s
       resources: irq:18 ioport:e000(size=256) memory:f7c00000-f7c00fff memory:f0000000-f0003fff
  *-network
       description: Interfaz inalámbrica
       physical id: 2
       bus info: usb@3:4
       logical name: wlxd85d4c9538fe
       series: d8:5d:4c:95:38:fe
       capabilities: ethernet physical wireless
       configuration: broadcast=yes driver=rt2800usb driverversion=4.15.0-47-generic firmware=0.36 ip=192.168.0.122 link=yes multicast=yes wireless=IEEE 802.11

lsusb:

Bus 002 Device 002: ID 8087:8000 Intel Corp. 
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 004: ID 258a:0001  
Bus 003 Device 006: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter
Bus 003 Device 005: ID 046d:c05a Logitech, Inc. M90/M100 Optical Mouse
Bus 003 Device 002: ID 2357:012d  
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

is the device Bus 003 Device 002: ID 2357:012d

then I checked rfkill list all and is not hard or soft blocked, and dmesg did not throw and error.

Thanks in advance

wireless drivers tp-link

3 Answers

  1. Best Answer

    I have just recently updated https://github.com/jeremyb31/rtl8822bu to support this device Make sure the other dkms modules are gone 

    sudo dkms remove rtl88x2bu/5.3.1 --all
sudo dkms remove 8822bu/1.1 --all

    Remove any possible manual installs using make 

    cd rtl8822bu && sudo make uninstall
    Update the git 
    git pull

    Remove cilynx 

     cd ~/rtl88x2BU_WiFi_linux_v5.3.1_27678.20180430_COEX20180427-5959 
sudo make uninstall

    Install updated version from https://github.com/jeremyb31/rtl8822bu 

    cd ~
sudo dkms add ./rtl8822bu
sudo dkms install 8822bu/1.1
    Reboot

    • 10

  2. Create a file in ~/Downloads called install_t3u.sh with the following content:

    #To run script, type 'sudo ./install_t3u.sh' in ~/Downloads/
##This bash-script assumes your CPU has eight-threads.

sudo dkms remove rtl88x2bu/5.3.1 --all;
sudo dkms remove 8822bu/1.1 --all;

cd ~/Downloads/;
git clone https://github.com/jeremyb31/rtl8822bu;
cd rtl8822bu/;
make uninstall -j 8;
make -j 8;
make install -j 8;
cd ../;
sudo cp -R rtl8822bu/ /usr/src/.-rtl8822bu/;
sudo dkms add ./rtl8822bu;
sudo rm -R rtl8822bu/;
echo "Install completed. Please reboot.";
echo "Try: 'sudo shutdown -f now' or 'reboot'";

    While in same directory, execute sudo ./install_t3u.sh

    • 1

  3. I'll add one more answer because the accepted one didn't work for me with Debian 10 (a distro which Ubuntu solutions work most of the time).

    I cloned this repo: https://github.com/cilynx/rtl88x2bu and followed the instruction in the readme.

    Here is a summary of the commands I used

    git clone https://github.com/cilynx/rtl88x2bu
cd rtl88x2bu
make
# I tested the module with this
sudo insmod 88x2bu.ko
# and then wifi worked!

# Then to make the module available after reboot
./deploy.sh
    • 0