After installing a fresh copy of 19.10, I've found a minor nuisance with audio. I have two devices listed under the sound section in gnome-control-center as follows:
HDMI / DisplayPort 2 - GP1-4 High Definition Audio Controller
Line Out - Built-in Audio
With previous Ubuntu releases, the default was always the section option, which is the one I want. Now, It's defaulting to the HDMI audio, and sending sound through my monitor's speakers.
Running pacmd list short sinks, it shows the following sinks information:
2 sink(s) available.
index: 0
name: <alsa_output.pci-0000_00_1f.3.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9039
volume: front-left: 11796 / 18% / -44.68 dB, front-right: 11796 / 18% / -44.68 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 371.52 ms
card: 0 <alsa_card.pci-0000_00_1f.3>
module: 7
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC892 Analog"
alsa.id = "ALC892 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xdd140000 irq 130"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1f.3"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "a170"
device.product.name = "100 Series/C230 Series Chipset Family HD Audio Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analogue Stereo"
device.description = "Built-in Audio Analogue Stereo"
alsa.mixer_name = "Realtek ALC892"
alsa.components = "HDA:10ec0892,18495892,00100302"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output-lineout: Line Out (priority 9000, latency offset 0 usec, available: yes)
properties:
analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-headphones"
active port: <analog-output-lineout>
* index: 1
name: <alsa_output.pci-0000_01_00.1.hdmi-stereo-extra1>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9030
volume: front-left: 0 / 0% / -inf dB, front-right: 0 / 0% / -inf dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: yes
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 2
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 371.52 ms
card: 1 <alsa_card.pci-0000_01_00.1>
module: 24
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "HDMI 1"
alsa.id = "HDMI 1"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "7"
alsa.card = "1"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xdf080000 irq 17"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
device.bus = "pci"
device.vendor.id = "10de"
device.vendor.name = "NVIDIA Corporation"
device.product.id = "10f0"
device.product.name = "GP104 High Definition Audio Controller"
device.string = "hdmi:1,1"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "hdmi-stereo-extra1"
device.profile.description = "Digital Stereo (HDMI 2)"
device.description = "GP104 High Definition Audio Controller Digital Stereo (HDMI 2)"
alsa.mixer_name = "Nvidia GPU 83 HDMI/DP"
alsa.components = "HDA:10de0083,38425180,00100100"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: yes)
properties:
device.icon_name = "video-display"
active port: <hdmi-output-1>
Running either pacmd set-default-sink 0 or pacmd set-default-sink 1, then rebooting makes no difference. It will always start up with the HDMI audio as the default.
What else can I try?
I had the same problem after upgrading from Ubuntu 19.04 to 19.10. What you have to do is go to
comment out
and reboot.
I hope it helps!
I have the same exact issue, fix does work but it is not the correct fix IMO When doing this you have now also commented out automatic connection for bluetooth headsets etc I believe
The section commented is
That LP 1702974 link is https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1702794
And it says
Looks like we want that but dont want HDMI monitors that can carry audio on the link but have no actual speaker attached to take the channel.
I had to comment out both
#load-module module-switch-on-connectand#load-module module-switch-on-port-availablefrom/etc/pulse/default.pa, to fix the issue completely, as described in this guide I found:GUIDE: Fixing "Audio input/output automatically switches to the wrong audio device on system startup"