I have installed a SSD M.2 2260 1TB into my laptop to be used as a secondary SSD eventually to be formatted to XFS. The laptop is a single boot 22.04LTS system, current. The device is listed in the HP BIOS settings as the NVME SSD and I have activated this setting in the laptop BIOS. I have included the output of lspci so the PCIe device does appear to be the NVME memory (Pericom on the SSD M.2 2260). What do I need to do to activate this device? My guess is some parameter for the kernel during boot and/or to install a NVME device driver (appropriate commands and/or .deb package for apt would be appreciated).
lspci output:
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:16.3 Serial controller: Intel Corporation 8 Series/C220 Series Chipset Family KT Controller (rev 04)
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-LM (rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d4)
00:1c.6 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #7 (rev d4)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM87 Express LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GK107GLM [Quadro K1100M] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GK107 HDMI Audio Controller (rev a1)
3b:00.0 PCI bridge: Pericom Semiconductor PI7C9X2G404 EL/SL PCIe2 4-Port/4-Lane Packet Switch (rev 05)
3c:01.0 PCI bridge: Pericom Semiconductor PI7C9X2G404 EL/SL PCIe2 4-Port/4-Lane Packet Switch (rev 05)
3c:02.0 PCI bridge: Pericom Semiconductor PI7C9X2G404 EL/SL PCIe2 4-Port/4-Lane Packet Switch (rev 05)
3c:03.0 PCI bridge: Pericom Semiconductor PI7C9X2G404 EL/SL PCIe2 4-Port/4-Lane Packet Switch (rev 05)
3d:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b)
5f:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5249 PCI Express Card Reader (rev 01)
As requested, lshw output. However, the output is too large (requires this question to be 33065 characters) and there seems to be no way to attach a plain text file. I have excerpted the relevant section for the PCIe controller that appears to be associated with the additional SSD (not the primary with a SATA physical interface). The physical device that plugs into the appropriate "socket" on the motherboard is a SSD M.2 2260 images of which are available on Amazon.
*-pci:1 description: PCI bridge product: PI7C9X2G404 EL/SL PCIe2 4-Port/4-Lane Packet Switch vendor: Pericom Semiconductor physical id: 2 bus info: pci@0000:3c:02.0 version: 05 width: 64 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: iomemory:41310-4130f irq:30 ioport:3000(size=8192) memory:c8000000-cbffffff ioport:4e300000(size=2097152) *-pci:2 description: PCI bridge product: PI7C9X2G404 EL/SL PCIe2 4-Port/4-Lane Packet Switch vendor: Pericom Semiconductor physical id: 3 bus info: pci@0000:3c:03.0 version: 05 width: 64 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: iomemory:1f10-1f0f irq:31 memory:cc000000-cc0fffff ioport:4e500000(size=2097152)
lscpi -knn relevant output:
`3c:00.0 PCI bridge [0604]: Pericom Semiconductor PI7C9X2G404 EL/SL PCIe2 4-Port/4-Lane Packet Switch [12d8:2404] (rev 05)
DeviceName: WLAN
3d:01.0 PCI bridge [0604]: Pericom Semiconductor PI7C9X2G404 EL/SL PCIe2 4-Port/4-Lane Packet Switch [12d8:2404] (rev 05) Kernel driver in use: pcieport 3d:02.0 PCI bridge [0604]: Pericom Semiconductor PI7C9X2G404 EL/SL PCIe2 4-Port/4-Lane Packet Switch [12d8:2404] (rev 05) Kernel driver in use: pcieport 3d:03.0 PCI bridge [0604]: Pericom Semiconductor PI7C9X2G404 EL/SL PCIe2 4-Port/4-Lane Packet Switch [12d8:2404] (rev 05) Kernel driver in use: pcieport`
0 Answers