System info:
Distributor ID: Ubuntu
Description: Ubuntu 22.04.5 LTS
Release: 22.04
Codename: jammy
When I run snap list, I get the following exception:
error: cannot list snaps: cannot add authorization: user: unknown userid 1532788159
I am also not able to open up firefox, or the snap store.
After creating the timidity.service file and the related symlink to start the service automatically at system reboot, I rebooted the system and gave the following input:
sudo systemctl status timidity
Output:
× timidity.service - TiMidity++ Daemon
Loaded: loaded (/lib/systemd/system/timidity.service; disabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Mon 2024-10-07 16:34:46 CEST; 50s ago
Process: 635 ExecStart=/usr/bin/timidity -iA Os (code=exited, status=1/FAILURE)
Main PID: 635 (code=exited, status=1/FAILURE)
CPU: 31ms
ott 07 16:34:46 netcom-Vostro-15-3510 systemd[1]: Started TiMidity++ Daemon.
ott 07 16:34:47 netcom-Vostro-15-3510 timidity[635]: jack_client_new: deprecated
ott 07 16:34:47 netcom-Vostro-15-3510 timidity[635]: Cannot connect to server socket err = No such file or directory
ott 07 16:34:47 netcom-Vostro-15-3510 timidity[635]: Cannot connect to server request channel
ott 07 16:34:47 netcom-Vostro-15-3510 timidity[635]: jack server is not running or cannot be started
ott 07 16:34:47 netcom-Vostro-15-3510 timidity[635]: JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
ott 07 16:34:47 netcom-Vostro-15-3510 timidity[635]: JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
ott 07 16:34:47 netcom-Vostro-15-3510 timidity[635]: Couldn't open output device
ott 07 16:34:46 netcom-Vostro-15-3510 systemd[1]: timidity.service: Main process exited, code=exited, status=1/FAILURE
ott 07 16:34:46 netcom-Vostro-15-3510 systemd[1]: timidity.service: Failed with result 'exit-code'.
My username is associated with the audio group.
Symlink:
/usr/lib/systemd/system/multi-user.target.wants/timidity.service
Service:
/usr/lib/systemd/system/timidity.service
Contains:
[Unit]
Description=TiMidity++ Daemon
After=sound.target
Requires=sound.target
[Service]
ExecStart=/usr/bin/timidity -iA Os
Type=simple
[Install]
WantedBy=multi-user.target
I also tried changing the "timidity.service" file to the following:
[Unit]
Description=TiMidity++ Daemon
After=pulseaudio.service
Requires=pulseaudio.service
[Service]
ExecStart=/usr/bin/timidity -iA Os
Type=simple
[Install]
WantedBy=multi-user.target
But after rebooting the system again, the error is the same.
Trying to start the service manually from the terminal with the system already started, the service starts correctly.
What am I doing wrong?
Just upgraded to 24.04.1 LTS, but my emacs configuration file can no longer load. Gives this error:
File is missing: Cannot open load file, No such file or directory, assoc
Seems lisp cannot find "assoc" any more. This worked just before upgrade from 22LTS.
GNU Emacs 29.3 (build 1, x86_64-pc-linux-gnu, GTK+ Version 3.24.41, cairo version 1.18.0) of 2024-04-01, modified by Debian
uname -a Linux BBalien 6.8.0-45-generic #45-Ubuntu SMP PREEMPT_DYNAMIC Fri Aug 30 12:02:04 UTC 2024 x86_64 x86_64 x86_64 GNU/Linux
I was installing redis and came across php8.3-fpm installation error. This are the relevant installation messages:
apt install redis-server
...
...
Setting up php8.3-fpm (8.3.6-0ubuntu0.24.04.2) ...
NOTICE: Not enabling PHP 8.3 FPM by default.
NOTICE: To enable PHP 8.3 FPM in Apache2 do:
NOTICE: a2enmod proxy_fcgi setenvif
NOTICE: a2enconf php8.3-fpm
NOTICE: You are seeing this message because you have apache2 package installed.
Job for php8.3-fpm.service failed because a timeout was exceeded.
See "systemctl status php8.3-fpm.service" and "journalctl -xeu php8.3-fpm.service" for details.
invoke-rc.d: initscript php8.3-fpm, action "restart" failed.
× php8.3-fpm.service - The PHP 8.3 FastCGI Process Manager
Loaded: loaded (/usr/lib/systemd/system/php8.3-fpm.service; enabled; preset: enabled)
Active: failed (Result: timeout) since Sun 2024-10-06 13:52:03 CEST; 16ms ago
Docs: man:php-fpm8.3(8)
Process: 285882 ExecStart=/usr/sbin/php-fpm8.3 --nodaemonize --fpm-config /etc/php/8.3/fpm/php-fpm.conf (code=exited, status=0/SUCCESS)
Process: 285889 ExecStopPost=/usr/lib/php/php-fpm-socket-helper remove /run/php/php-fpm.sock /etc/php/8.3/fpm/pool.d/www.conf 83 (code=exited, status=0/SUCCESS)
Main PID: 285882 (code=exited, status=0/SUCCESS)
CPU: 90ms
Oct 06 13:50:33 Ubuntu-2404-noble-amd64-base systemd[1]: Starting php8.3-fpm.service - The PHP 8.3 FastCGI Process Manager...
Oct 06 13:52:03 Ubuntu-2404-noble-amd64-base systemd[1]: php8.3-fpm.service: start operation timed out. Terminating.
Oct 06 13:52:03 Ubuntu-2404-noble-amd64-base systemd[1]: php8.3-fpm.service: Failed with result 'timeout'.
Oct 06 13:52:03 Ubuntu-2404-noble-amd64-base systemd[1]: Failed to start php8.3-fpm.service - The PHP 8.3 FastCGI Process Manager.
dpkg: error processing package php8.3-fpm (--configure):
installed php8.3-fpm package post-installation script subprocess returned error exit status 1
Setting up libjemalloc2:amd64 (5.3.0-2build1) ...
Setting up liblzf1:amd64 (3.6-4) ...
Setting up redis-tools (5:7.0.15-1build2) ...
Setting up redis-server (5:7.0.15-1build2) ...
Created symlink /etc/systemd/system/redis.service → /usr/lib/systemd/system/redis-server.service.
Created symlink /etc/systemd/system/multi-user.target.wants/redis-server.service → /usr/lib/systemd/system/redis-server.service.
Processing triggers for man-db (2.12.0-4build2) ...
Processing triggers for libc-bin (2.39-0ubuntu8.3) ...
Errors were encountered while processing:
php8.3-fpm
needrestart is being skipped since dpkg has failed
E: Sub-process /usr/bin/dpkg returned an error code (1)
Systemctl and yournalctl messages are not particularly descriptive - just saying php8.3-fpm failed to start with result 'timeout'.
The error seem to be with dpkg processing php8.3-fpm : installed php8.3-fpm package post-installation script subprocess returned error exit status 1
Content of /var/lib/dpkg/info/php8.3-fpm.postinst:
#!/bin/sh
set -e
if [ -e /usr/share/apache2/apache2-maintscript-helper ]; then
. /usr/share/apache2/apache2-maintscript-helper
php_enable() {
# Don't enable PHP FPM by default when Apache 2 is installed
apache2_msg notice "NOTICE: Not enabling PHP 8.3 FPM by default."
apache2_msg notice "NOTICE: To enable PHP 8.3 FPM in Apache2 do:"
apache2_msg notice "NOTICE: a2enmod proxy_fcgi setenvif"
apache2_msg notice "NOTICE: a2enconf php8.3-fpm"
apache2_msg notice "NOTICE: You are seeing this message because you have apache2 package installed."
return 1
}
else
php_enable() {
# Don't enable PHP FPM by default when Apache 2 is not installed
return 1
}
fi
if [ "$1" = "triggered" ] && [ "$2" = "/etc/php/8.3/fpm/conf.d" ]; then
invoke-rc.d php8.3-fpm restart
fi
CONFDIR=/etc/php/8.3/fpm/conf.d
if [ "$1" = "configure" ]; then
phpini="/etc/php/8.3/fpm/php.ini"
if [ "fpm" = "cli" ]; then
ucf /usr/lib/php/8.3/php.ini-production.fpm $phpini
else
ucf /usr/lib/php/8.3/php.ini-production $phpini
fi
ucfr php8.3-fpm $phpini
if [ -e /usr/lib/php/php-maintscript-helper ]; then
. /usr/lib/php/php-maintscript-helper
mods=$(phpquery -M -v 8.3)
for mod in $mods; do
php_invoke enmod 8.3 fpm $mod
done
fi
if [ -n "$2" ] && dpkg --compare-versions "$2" lt "7.0.3-2~"; then
rm -f /etc/php/8.3/fpm/conf.d/20-opcache.ini;
fi
fi
# Automatically added by dh_apache2/UNDECLARED
if php_enable; then
if [ -e /usr/share/apache2/apache2-maintscript-helper ] ; then
. /usr/share/apache2/apache2-maintscript-helper
for conf in php8.3-fpm ; do
apache2_invoke enconf $conf || exit 1
done
fi
fi
# End automatically added section
# Automatically added by dh_systemd_enable/13.14.1ubuntu5
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
# The following line should be removed in trixie or trixie+1
deb-systemd-helper unmask 'php8.3-fpm.service' >/dev/null || true
# was-enabled defaults to true, so new installations run enable.
if deb-systemd-helper --quiet was-enabled 'php8.3-fpm.service'; then
# Enables the unit on first installation, creates new
# symlinks on upgrades if the unit file has changed.
deb-systemd-helper enable 'php8.3-fpm.service' >/dev/null || true
else
# Update the statefile to add new symlinks (if any), which need to be
# cleaned up on purge. Also remove old symlinks.
deb-systemd-helper update-state 'php8.3-fpm.service' >/dev/null || true
fi
fi
# End automatically added section
# Automatically added by dh_installinit/13.14.1ubuntu5
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
if [ -x "$(command -v systemd-tmpfiles)" ]; then
systemd-tmpfiles ${DPKG_ROOT:+--root="$DPKG_ROOT"} --create php8.3-fpm.conf || true
fi
fi
# End automatically added section
# Automatically added by dh_installdeb/13.14.1ubuntu5
dpkg-maintscript-helper rm_conffile /etc/init/php8.3-fpm.conf 7.4.3-4\~ php8.3-fpm -- "$@"
# End automatically added section
# Automatically added by dh_installinit/13.14.1ubuntu5
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
if [ -z "${DPKG_ROOT:-}" ] && [ -x "/etc/init.d/php8.3-fpm" ]; then
update-rc.d php8.3-fpm defaults >/dev/null
if [ -n "$2" ]; then
_dh_action=restart
else
_dh_action=start
fi
invoke-rc.d php8.3-fpm $_dh_action || exit 1
fi
fi
# End automatically added section
exit 0
Not familiar with how dpkg functions, but exit 1 occurs in 2 locations. First one occurs when reading apache conf files. I have removed apache2 so this one cannot not trigger anymore. The second one just signals that start/restart failed.
Any tips on what could be the problem? This seems to be above my skill level.
Additional info: running systemctl status php8.3-fpm.service returns
× php8.3-fpm.service - The PHP 8.3 FastCGI Process Manager
Loaded: loaded (/usr/lib/systemd/system/php8.3-fpm.service; enabled; preset: enabled)
Active: failed (Result: timeout) since Mon 2024-10-07 11:34:21 CEST; 1min 33s ago
Docs: man:php-fpm8.3(8)
Process: 334032 ExecStart=/usr/sbin/php-fpm8.3 --nodaemonize --fpm-config /etc/php/8.3/fpm/php-fpm.conf (code=exited, status=0/SUCCESS)
Process: 334035 ExecStopPost=/usr/lib/php/php-fpm-socket-helper remove /run/php/php-fpm.sock /etc/php/8.3/fpm/pool.d/www.conf 83 (code=exited, status=0/SUCCESS)
Main PID: 334032 (code=exited, status=0/SUCCESS)
CPU: 98ms
Oct 07 11:32:51 Ubuntu-2404-noble-amd64-base systemd[1]: Starting php8.3-fpm.service - The PHP 8.3 FastCGI Process Manager...
Oct 07 11:34:21 Ubuntu-2404-noble-amd64-base systemd[1]: php8.3-fpm.service: start operation timed out. Terminating.
Oct 07 11:34:21 Ubuntu-2404-noble-amd64-base systemd[1]: php8.3-fpm.service: Failed with result 'timeout'.
Oct 07 11:34:21 Ubuntu-2404-noble-amd64-base systemd[1]: Failed to start php8.3-fpm.service - The PHP 8.3 FastCGI Process Manager.
Additionaly, manually starting the service with /usr/sbin/php-fpm8.3 --nodaemonize --fpm-config /etc/php/8.3/fpm/php-fpm.conf returns
NOTICE: fpm is running, pid 334206
NOTICE: ready to handle connections
NOTICE: systemd monitor interval set to 10000ms
... no more messages
indicating that fpm was started successfully, but perhaps systemd has an issue? Am I dealing with mismatched PID numbers?
I just recompiled the Ubuntu Jammy HWE kernel 6.8.0-45 using these steps:
# Clone Ubuntu stock Kernel repo
git clone git://git.launchpad.net/~ubuntu-kernel/ubuntu/+source/linux/+git/jammy
cd jammy
git checkout Ubuntu-hwe-6.8-6.8.0-45.45_22.04.1
# Build deps
sudo apt build-dep linux linux-image-unsigned-`uname -r`
sudo apt install build-essential libncurses-dev bison flex libssl-dev libelf-dev fakeroot libncurses-dev gawk flex bison openssl libssl-dev dkms libelf-dev libudev-dev libpci-dev libiberty-dev autoconf llvm dwarves
# Clean all
fakeroot debian/rules clean && make ARCH=x86 mrproper && git clean -fd && git restore . && git clean -fd && git restore .
# do custom changes
code debian.hwe-6.8/changelog # Append custom version
code include/linux/uts.h # Modify UTS_SYSNAME
# Update Debian configs
chmod a+x debian/rules && chmod a+x debian/scripts/* && chmod a+x debian/scripts/misc/*
fakeroot debian/rules clean
fakeroot debian/rules editconfigs
# Start build
fakeroot debian/rules binary-headers binary-generic
I was wondering on how can I just recompile the single 'iwlwifi.ko' module without re-compile the whole kernel.
I tried to perform standard recompilation from the root of kernel sources by running:
make -j$(nproc) M=drivers/net/wireless/intel/iwlwifi modules
But when tying to insert this I get:
> sudo insmod drivers/net/wireless/intel/iwlwifi/iwlwifi.ko
insmod: ERROR: could not insert module drivers/net/wireless/intel/iwlwifi/iwlwifi.ko: Invalid parameters
And dmesg says:
[10754.522405] BPF: [139328] ENUM x509_key_exit
[10754.522410] BPF: size=4 vlen=34
[10754.522410] BPF:
[10754.522411] BPF: Invalid name
[10754.522412] BPF:
[10754.522413] failed to validate module [iwlwifi] BTF: -22
I guess there must be a way to exploit the fakeroot debian/rules mechanism for just re-compile a single module without clean everything all and build the whole kernel again.
Thank you for support.