When I boot an external HDD (fat32) and click on "Try Ubuntu", the system hangs, it has no cursor and the hard drive is doing nothing, I have no choice than to hard shutdown the laptop.
I have a Windows boot partition on an SSD, maybe it is the problem here? I checked for a "Fast boot" option in the BIOS but it does not exist nor a "Secure boot".
I have an Nvidia GeForce GTX 1050 as a GPU and an Intel HD Graphics 630 integrated video chip.
I have a Samsung Odyssey laptop which has both Nvidia and intel graphics. I am dual booting windows10 and Ubuntu18.04 but the keyboard backlight doesn’t work after pressing the hot keys (Fn + F9) when in Ubuntu environment. I read that the intel graphics is what controls the backlight so I switched to using the intel graphics but it still doesn’t work. Is there a work around for it.
I have an Intel onboard GPU and NVIDIA GPU. I am running Ubuntu 18.04.
How do I configure a dual GPU setup so that Intel onboard iGPU will drive the monitor, leaving NVIDIA GPU exclusively for Machine Learning CUDA work?
So, for a bit of background: I'm using Ubuntu 18.04 on an HP laptop, which uses a dual GPU setup. Before, I have been using it with just the Nouveau driver, but recently I wanted to add in a second monitor so I switched to the proprietary Nvidia driver 390.77 (which was something of an odyssey in itself).
Now the issue is that while the secondary monitor (connected through HDMI) works fine, the primary built-in laptop screen does not. During the boot-sequence, everything is displayed as normal on the laptop screen, including the grub menu and the startup log.
But the moment the log reaches "Started User Manager for UID 120" (at which point presumably the graphics driver is started up), the laptop screen freezes there and all further output is displayed on the secondary monitor. The Ubuntu display settings only recognize a single display (the external monitor), as does nvidia-settings.
What might be noteworthy is that I'm dual-booting this system together with Windows 10, and under Windows this issue doesn't happen, both displays work just fine and like you'd expect over there.
Now, my personal suspicion is that it might have something to do with the dual GPUs, in that the Intel one usually outputs to the laptop screen and the Nvidia one to the HDMI port, but I'm not certain.
I have tried to use the Intel GPU instead, via sudo prime-select intel, but in that case the Nvidia driver didn't load at all, and I could only use the primary laptop screen while the external monitor wasn't recognized (i.e. similar to the behaviour under Nouveau). Additionally, this lead to a very low resolution that could only be circumvented by manually adding a new mode via xrandr.
As for some possibly relevant data, here's the output of lswh -C video:
*-display
description: VGA compatible controller
product: GP107M [GeForce GTX 1050 Ti Mobile]
vendor: NVIDIA Corporation
physical id: 0
bus info: pci@0000:01:00.0
version: a1
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress vga_controller bus_master cap_list rom
configuration: driver=nvidia latency=0
resources: irq:142 memory:b3000000-b3ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:4000(size=128) memory:b4000000-b407ffff
*-display
description: VGA compatible controller
product: Intel Corporation
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 04
width: 64 bits
clock: 33MHz
capabilities: pciexpress msi pm vga_controller bus_master cap_list rom
configuration: driver=i915 latency=0
resources: irq:141 memory:b2000000-b2ffffff memory:c0000000-cfffffff ioport:5000(size=64) memory:c0000-dffff
And here's xrandr. Noteworthy here is that the usual name of the laptop's display, eDP-1, is not even listed here:
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
HDMI-0 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 598mm x 336mm
1920x1080 60.00*+ 59.94 50.00 50.00
1680x1050 59.95
1600x900 60.00
1440x900 59.89
1280x1024 60.02
1280x800 59.81
1280x720 60.00 59.94 50.00
1024x768 60.00
800x600 60.32
720x576 50.00
720x480 59.94
640x480 59.94
Finally, here's xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 390.77 (buildmeister@swio-display-x64-rhel04-14) Tue Jul 10 23:19:22 PDT 2018
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
My laptop has a dedicated GPU, it is an AMD Radeon HD 6300. How can I test it with glmark2?
By default it is using the iGPU. glmark2 man page doesn't show an option to choose the dGPU.