Questions[joystick](ubuntu)

I have a Trust GTX YULA controller which I would also like to use on my Ubuntu laptop.

The controller has a switch between Direct mode and X mode, where it pretends to be an XBOX controller. X mode works fine on Windows. I don't want to use D mode because the analog sticks provide discrete inputs in that mode, pretending to be buttons, and one overlaps with the ABXY buttons.

The output to lsusb contains this line:

Bus 001 Device 013: ID 045e:028e Microsoft Corp. Xbox360 Controller

Which I assume is my controller since I have no other controllers. It is connected through an USB hub.

I have installed jstest-gtk, and it also sees the controller as an XBOX 360 pad, but clicking properties and pushing buttons on the controller does not make the corresponding software icons light up.

I have tried using xboxdrv, but this is the output:

$ sudo xboxdrv
xboxdrv 0.8.8 - http://pingus.seul.org/~grumbel/xboxdrv/ 
Copyright © 2008-2011 Ingo Ruhnke <[email protected]> 
Licensed under GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> 
This program comes with ABSOLUTELY NO WARRANTY. 
This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details. 

Controller:        Microsoft X-Box 360 pad
Vendor/Product:    045e:028e
USB Path:          001:013
Controller Type:   Xbox360

Your Xbox/Xbox360 controller should now be available as:
  /dev/input/js0
  /dev/input/event18

Press Ctrl-C to quit, use '--silent' to suppress the event output
[ERROR] USBController::on_read_data(): USB read failure: 32: LIBUSB_TRANSFER_ERROR
[ERROR] USBController::on_write_data(): USB write failure: 3: LIBUSB_TRANSFER_ERROR

With this running, evtest gives the following output (pushing buttons on the controller does nothing)

$ evtest /dev/input/event18
Input driver version is 1.0.1
Input device ID: bus 0x0 vendor 0x0 product 0x0 version 0x0
Input device name: "Xbox Gamepad (userspace driver)"
Supported events:
  Event type 0 (EV_SYN)
  Event type 1 (EV_KEY)
    Event code 304 (BTN_SOUTH)
    Event code 305 (BTN_EAST)
    Event code 307 (BTN_NORTH)
    Event code 308 (BTN_WEST)
    Event code 310 (BTN_TL)
    Event code 311 (BTN_TR)
    Event code 314 (BTN_SELECT)
    Event code 315 (BTN_START)
    Event code 316 (BTN_MODE)
    Event code 317 (BTN_THUMBL)
    Event code 318 (BTN_THUMBR)
  Event type 3 (EV_ABS)
    Event code 0 (ABS_X)
      Value      0
      Min   -32768
      Max    32767
    Event code 1 (ABS_Y)
      Value      0
      Min   -32768
      Max    32767
    Event code 3 (ABS_RX)
      Value      0
      Min   -32768
      Max    32767
    Event code 4 (ABS_RY)
      Value      0
      Min   -32768
      Max    32767
    Event code 9 (ABS_GAS)
      Value      0
      Min        0
      Max      255
    Event code 10 (ABS_BRAKE)
      Value      0
      Min        0
      Max      255
    Event code 16 (ABS_HAT0X)
      Value      0
      Min       -1
      Max        1
    Event code 17 (ABS_HAT0Y)
      Value      0
      Min       -1
      Max        1
Properties:
Testing ... (interrupt to exit)

One user suggested removing xserver-xorg-input-joystick.*, but I don't have any installed.

How can I make my controller work?

Is this site effective as a check?

Thank you.

My 8Bitdo SN30 Pro is not being detected by my computer ether by bluetooth or usb connection. Is the controller not supported in Ubuntu or Linux?

I have a joystick(img) with device id

0079-0006-DragonRise Inc. Generic USB Joystick

I would like use it in my Ubuntu 16.04 system. So I tried to install joystick and jscalbrator to confiure the device.

Following commands where used:

sudo apt install joystick

Tried to test it with

 jstest-gtk

Output :

The program 'jstest-gtk' is currently not installed. You can install it by typing:sudo apt install jstest-gtk

I tried to install it.

Output image 1

Then

sudo apt-get install jscalibrator

Output image 2

I tried antimicro,but got the error : E: Unable to locate package antimicro And

sudo apt-get install xboxdrv

Completed

sudo xboxdrv –detach-kernel-driver

Error : -- [ ERROR ] ------------------------------------------------------ No Xbox or Xbox360 controller found

Later used lsusb to find my device and got Bus 002 Device 009: ID 0079:0006 DragonRise Inc. PC TWIN SHOCK Gamepad lsusb -vd 0079:0006 Output:

Output image 3

Output image 4

Then

xboxdrv --debug --device-by-id 0079:0006 --type xbox360 --detach-kernel-driver

Output image 5

jscal -c /dev/input/js0

Output:

Output image 6

Output image 7

I dont know what else to do.

PS:Hope I provided all the necessary information regarding my problem.

There are many questions about this subject:

• Remapping both mouse and keyboard to a gamepad
• How do I configure a joystick or gamepad?
• How to control the mouse pointer via my keyboard?
• ...

But the purpose of these questions/answers is to be able to use the gamepad for playing a game.

I would like a solution to use the gamepad to control THE mouse.
To replace the mouse by the gamepad in all applications.
That way I could control my computer in the living-room from my couch with a wireless gamepad.

Possible Duplicate:
Joystick acts as mouse; won't stop

I've a problem, my joypad actually acting like a mouse, and doesn't work with torcs game, somebody know how to make it working properly?