Home / ubuntu / Questions / 622843
In Process
alex345
Asked: 2015-05-13 09:57:19 +0800 CST

USB 2.0 ports not working 14.04 device descriptor read/64, error -32

  • 772

Tried asking this on ubuntuforums but nothing forthcoming there. Here's my issue:

Hello I wonder if someone can help me with this. I have searched but yet to find an answer that works.

Ubuntu 14.04 fresh install on a custom built PC using a Gigabyte 990XA-UD3 motherboard. The BIOS was updated to the latest version using Q-flash and I chose to load the defaults (where it said everything would work).

USB 3.0 ports work, USB 2.0 ports do not and there are 8 xUSD 2.0 ports and 3x USB 3.0 ports. Physically for example I plug in the USB mouse I am using into a USB 2.0 port, the laser light flashes, then goes off. The mouse fails to work, as does any other USB device plugged into the USB 2.0 ports.

lsusb brings 

Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 011 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 010 Device 006: ID 192f:0916 Avago Technologies, Pte. 
Bus 010 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 008 Device 003: ID 0bda:8178 Realtek Semiconductor Corp. RTL8192CU 802.11n WLAN Adapter
Bus 008 Device 002: ID 1a2c:0e24 China Resource Semico Co., Ltd 
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

when I run dmesg I see (at the end) 

[ 1867.756542] usb 5-2: new low-speed USB device number 24 using ohci-pci
[ 1868.164189] usb 5-2: device not accepting address 24, error -32
[ 1868.300101] usb 5-2: new low-speed USB device number 25 using ohci-pci
[ 1868.707749] usb 5-2: device not accepting address 25, error -32
[ 1868.843660] usb 5-2: new low-speed USB device number 26 using ohci-pci
[ 1868.983546] usb 5-2: device descriptor read/64, error -32
[ 1869.634998] usb 5-2: device not accepting address 26, error -32
[ 1869.770899] usb 5-2: new low-speed USB device number 27 using ohci-pci
[ 1870.314436] usb 5-2: device not accepting address 27, error -32
[ 1870.314474] hub 5-0:1.0: unable to enumerate USB device on port 2
[ 1876.705297] usb 10-1: new low-speed USB device number 6 using xhci_hcd
[ 1876.749312] usb 10-1: New USB device found, idVendor=192f, idProduct=0916
[ 1876.749320] usb 10-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1876.749325] usb 10-1: Product: USB Optical Mouse
[ 1876.749571] usb 10-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1876.763922] input: USB Optical Mouse as /devices/pci0000:00/0000:00:0a.0/0000:04:00.0/usb10/10-1/10-1:1.0/input/input21
[ 1876.764180] hid-generic 0003:192F:0916.0006: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:04:00.0-1/input0

When done, the only things plugged into the USB 3.0 ports are the keyboard and mouse. Help! at the moment the PC is looking like a very high powered doorstop.

usb

0 Answers