I seem unable to unshare my screen when using zoom. There doesn't seem to be any menu option to do so. When I google, all I can find are tips on how to share one's screen. Anyone else know what has to be done to make this happen? Zoom version 5.1; ubuntu 20.04
I'm running into the following error when I run sudo apt-get update:
E: Failed to fetch http://security.ubuntu.com/ubuntu/dists/xenial-security/main/dep11/icons-64x64.tar Could not open file /var/lib/apt/lists/partial/security.ubuntu.com_ubuntu_dists_xenial-security_main_dep11_icons-64x64.tar.gz - open (13: Permission denied) [IP: 91.189.88.149 80]
Any thoughts as to what might be causing this or how it should best be resolved?
I have a csv file that I'm intending to import into a mysql table. I would therefore like to make sure I'm reporting it's LINES TERMINATED BY properly. However I cannot figure out what characters are terminating the lines in this csv.
I'd guess that it's terminated by \n (the standard Unix EOL). How can I determine this for sure?
I've tried
cat -v file.csvfile file.csv
I've also tried using vim and :set list which just showed the location of line breaks with $
Any suggestions would be appreciated
My computer has started to show signs of a bloated root partition. I checked it out using ncdu and discovered that the directory at /var/tmp/kdecache-user/ has swelled to 1.6 gigs. After doing a ls -l, some of this stuff hasn't been touched in many months. Question: what should I do about this behemoth? I figure I can just clear it out but why is stuff allowed to accumulate in here? Are there settings that govern this? Are there best practices for cleaning it out? (Apart from not running kde)
I seem to be in the midst of a struggle between apache2 and ssl on my 12.04 VPS. Whenever I enable SSL on one of my virtual servers, apache fails to start. Upon examination of my virtual host's error logs, I'm confronted with the following:
[Fri Jan 02 04:11:30 2015] [error] Unable to configure permitted SSL ciphers
[Fri Jan 02 04:11:30 2015] [error] SSL Library Error: 336486680 error:140E6118:SSL routines:SSL_CIPHER_PROCESS_RULESTR:invalid command
[Fri Jan 02 04:11:30 2015] [error] SSL Library Error: 336486680 error:140E6118:SSL routines:SSL_CIPHER_PROCESS_RULESTR:invalid command
Upon disabling SSL on virtual servers, apache works just fine.
I had a look at the apache2.config and found that apache appears to be looking for SSLv2:
SSLProtocol ALL -SSLv2
SSLCipherSuite ECDHE-RSA-AES256-SHA384:AES256-SHA256:AES256-SHA256:RC4:HIGH:MEDIUM:+TLSv1:+TLSv1.1:+TLSv1.2:!MD5:!ADH:!aNULL:!eNULL:!NULL:!DH:!ADH:!EDH:!AESGCM
However, when I look at the ciphers openssl is using, it appears to be using SSLv3:
openssl ciphers -v
ECDHE-RSA-AES256-GCM-SHA384 TLSv1.2 Kx=ECDH Au=RSA Enc=AESGCM(256) Mac=AEAD
ECDHE-ECDSA-AES256-GCM-SHA384 TLSv1.2 Kx=ECDH Au=ECDSA Enc=AESGCM(256) Mac=AEAD
ECDHE-RSA-AES256-SHA384 TLSv1.2 Kx=ECDH Au=RSA Enc=AES(256) Mac=SHA384
ECDHE-ECDSA-AES256-SHA384 TLSv1.2 Kx=ECDH Au=ECDSA Enc=AES(256) Mac=SHA384
ECDHE-RSA-AES256-SHA SSLv3 Kx=ECDH Au=RSA Enc=AES(256) Mac=SHA1
ECDHE-ECDSA-AES256-SHA SSLv3 Kx=ECDH Au=ECDSA Enc=AES(256) Mac=SHA1
SRP-DSS-AES-256-CBC-SHA SSLv3 Kx=SRP Au=DSS Enc=AES(256) Mac=SHA1
SRP-RSA-AES-256-CBC-SHA SSLv3 Kx=SRP Au=RSA Enc=AES(256) Mac=SHA1
SRP-AES-256-CBC-SHA SSLv3 Kx=SRP Au=SRP Enc=AES(256) Mac=SHA1
DHE-DSS-AES256-GCM-SHA384 TLSv1.2 Kx=DH Au=DSS Enc=AESGCM(256) Mac=AEAD
DHE-RSA-AES256-GCM-SHA384 TLSv1.2 Kx=DH Au=RSA Enc=AESGCM(256) Mac=AEAD
DHE-RSA-AES256-SHA256 TLSv1.2 Kx=DH Au=RSA Enc=AES(256) Mac=SHA256
DHE-DSS-AES256-SHA256 TLSv1.2 Kx=DH Au=DSS Enc=AES(256) Mac=SHA256
DHE-RSA-AES256-SHA SSLv3 Kx=DH Au=RSA Enc=AES(256) Mac=SHA1
DHE-DSS-AES256-SHA SSLv3 Kx=DH Au=DSS Enc=AES(256) Mac=SHA1
DHE-RSA-CAMELLIA256-SHA SSLv3 Kx=DH Au=RSA Enc=Camellia(256) Mac=SHA1
DHE-DSS-CAMELLIA256-SHA SSLv3 Kx=DH Au=DSS Enc=Camellia(256) Mac=SHA1
ECDH-RSA-AES256-GCM-SHA384 TLSv1.2 Kx=ECDH/ECDSA Au=ECDH Enc=AESGCM(256) Mac=AEAD
ECDH-ECDSA-AES256-GCM-SHA384 TLSv1.2 Kx=ECDH/ECDSA Au=ECDH Enc=AESGCM(256) Mac=AEAD
ECDH-RSA-AES256-SHA384 TLSv1.2 Kx=ECDH/ECDSA Au=ECDH Enc=AES(256) Mac=SHA384
ECDH-ECDSA-AES256-SHA384 TLSv1.2 Kx=ECDH/ECDSA Au=ECDH Enc=AES(256) Mac=SHA384
ECDH-RSA-AES256-SHA SSLv3 Kx=ECDH/RSA Au=ECDH Enc=AES(256) Mac=SHA1
ECDH-ECDSA-AES256-SHA SSLv3 Kx=ECDH/ECDSA Au=ECDH Enc=AES(256) Mac=SHA1
AES256-GCM-SHA384 TLSv1.2 Kx=RSA Au=RSA Enc=AESGCM(256) Mac=AEAD
AES256-SHA256 TLSv1.2 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA256
AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1
CAMELLIA256-SHA SSLv3 Kx=RSA Au=RSA Enc=Camellia(256) Mac=SHA1
PSK-AES256-CBC-SHA SSLv3 Kx=PSK Au=PSK Enc=AES(256) Mac=SHA1
ECDHE-RSA-DES-CBC3-SHA SSLv3 Kx=ECDH Au=RSA Enc=3DES(168) Mac=SHA1
ECDHE-ECDSA-DES-CBC3-SHA SSLv3 Kx=ECDH Au=ECDSA Enc=3DES(168) Mac=SHA1
SRP-DSS-3DES-EDE-CBC-SHA SSLv3 Kx=SRP Au=DSS Enc=3DES(168) Mac=SHA1
SRP-RSA-3DES-EDE-CBC-SHA SSLv3 Kx=SRP Au=RSA Enc=3DES(168) Mac=SHA1
SRP-3DES-EDE-CBC-SHA SSLv3 Kx=SRP Au=SRP Enc=3DES(168) Mac=SHA1
EDH-RSA-DES-CBC3-SHA SSLv3 Kx=DH Au=RSA Enc=3DES(168) Mac=SHA1
EDH-DSS-DES-CBC3-SHA SSLv3 Kx=DH Au=DSS Enc=3DES(168) Mac=SHA1
ECDH-RSA-DES-CBC3-SHA SSLv3 Kx=ECDH/RSA Au=ECDH Enc=3DES(168) Mac=SHA1
ECDH-ECDSA-DES-CBC3-SHA SSLv3 Kx=ECDH/ECDSA Au=ECDH Enc=3DES(168) Mac=SHA1
DES-CBC3-SHA SSLv3 Kx=RSA Au=RSA Enc=3DES(168) Mac=SHA1
PSK-3DES-EDE-CBC-SHA SSLv3 Kx=PSK Au=PSK Enc=3DES(168) Mac=SHA1
ECDHE-RSA-AES128-GCM-SHA256 TLSv1.2 Kx=ECDH Au=RSA Enc=AESGCM(128) Mac=AEAD
ECDHE-ECDSA-AES128-GCM-SHA256 TLSv1.2 Kx=ECDH Au=ECDSA Enc=AESGCM(128) Mac=AEAD
ECDHE-RSA-AES128-SHA256 TLSv1.2 Kx=ECDH Au=RSA Enc=AES(128) Mac=SHA256
ECDHE-ECDSA-AES128-SHA256 TLSv1.2 Kx=ECDH Au=ECDSA Enc=AES(128) Mac=SHA256
ECDHE-RSA-AES128-SHA SSLv3 Kx=ECDH Au=RSA Enc=AES(128) Mac=SHA1
ECDHE-ECDSA-AES128-SHA SSLv3 Kx=ECDH Au=ECDSA Enc=AES(128) Mac=SHA1
SRP-DSS-AES-128-CBC-SHA SSLv3 Kx=SRP Au=DSS Enc=AES(128) Mac=SHA1
SRP-RSA-AES-128-CBC-SHA SSLv3 Kx=SRP Au=RSA Enc=AES(128) Mac=SHA1
SRP-AES-128-CBC-SHA SSLv3 Kx=SRP Au=SRP Enc=AES(128) Mac=SHA1
DHE-DSS-AES128-GCM-SHA256 TLSv1.2 Kx=DH Au=DSS Enc=AESGCM(128) Mac=AEAD
DHE-RSA-AES128-GCM-SHA256 TLSv1.2 Kx=DH Au=RSA Enc=AESGCM(128) Mac=AEAD
DHE-RSA-AES128-SHA256 TLSv1.2 Kx=DH Au=RSA Enc=AES(128) Mac=SHA256
DHE-DSS-AES128-SHA256 TLSv1.2 Kx=DH Au=DSS Enc=AES(128) Mac=SHA256
DHE-RSA-AES128-SHA SSLv3 Kx=DH Au=RSA Enc=AES(128) Mac=SHA1
DHE-DSS-AES128-SHA SSLv3 Kx=DH Au=DSS Enc=AES(128) Mac=SHA1
DHE-RSA-SEED-SHA SSLv3 Kx=DH Au=RSA Enc=SEED(128) Mac=SHA1
DHE-DSS-SEED-SHA SSLv3 Kx=DH Au=DSS Enc=SEED(128) Mac=SHA1
DHE-RSA-CAMELLIA128-SHA SSLv3 Kx=DH Au=RSA Enc=Camellia(128) Mac=SHA1
DHE-DSS-CAMELLIA128-SHA SSLv3 Kx=DH Au=DSS Enc=Camellia(128) Mac=SHA1
ECDH-RSA-AES128-GCM-SHA256 TLSv1.2 Kx=ECDH/ECDSA Au=ECDH Enc=AESGCM(128) Mac=AEAD
ECDH-ECDSA-AES128-GCM-SHA256 TLSv1.2 Kx=ECDH/ECDSA Au=ECDH Enc=AESGCM(128) Mac=AEAD
ECDH-RSA-AES128-SHA256 TLSv1.2 Kx=ECDH/ECDSA Au=ECDH Enc=AES(128) Mac=SHA256
ECDH-ECDSA-AES128-SHA256 TLSv1.2 Kx=ECDH/ECDSA Au=ECDH Enc=AES(128) Mac=SHA256
ECDH-RSA-AES128-SHA SSLv3 Kx=ECDH/RSA Au=ECDH Enc=AES(128) Mac=SHA1
ECDH-ECDSA-AES128-SHA SSLv3 Kx=ECDH/ECDSA Au=ECDH Enc=AES(128) Mac=SHA1
AES128-GCM-SHA256 TLSv1.2 Kx=RSA Au=RSA Enc=AESGCM(128) Mac=AEAD
AES128-SHA256 TLSv1.2 Kx=RSA Au=RSA Enc=AES(128) Mac=SHA256
AES128-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(128) Mac=SHA1
SEED-SHA SSLv3 Kx=RSA Au=RSA Enc=SEED(128) Mac=SHA1
CAMELLIA128-SHA SSLv3 Kx=RSA Au=RSA Enc=Camellia(128) Mac=SHA1
PSK-AES128-CBC-SHA SSLv3 Kx=PSK Au=PSK Enc=AES(128) Mac=SHA1
ECDHE-RSA-RC4-SHA SSLv3 Kx=ECDH Au=RSA Enc=RC4(128) Mac=SHA1
ECDHE-ECDSA-RC4-SHA SSLv3 Kx=ECDH Au=ECDSA Enc=RC4(128) Mac=SHA1
ECDH-RSA-RC4-SHA SSLv3 Kx=ECDH/RSA Au=ECDH Enc=RC4(128) Mac=SHA1
ECDH-ECDSA-RC4-SHA SSLv3 Kx=ECDH/ECDSA Au=ECDH Enc=RC4(128) Mac=SHA1
RC4-SHA SSLv3 Kx=RSA Au=RSA Enc=RC4(128) Mac=SHA1
RC4-MD5 SSLv3 Kx=RSA Au=RSA Enc=RC4(128) Mac=MD5
PSK-RC4-SHA SSLv3 Kx=PSK Au=PSK Enc=RC4(128) Mac=SHA1
EDH-RSA-DES-CBC-SHA SSLv3 Kx=DH Au=RSA Enc=DES(56) Mac=SHA1
EDH-DSS-DES-CBC-SHA SSLv3 Kx=DH Au=DSS Enc=DES(56) Mac=SHA1
DES-CBC-SHA SSLv3 Kx=RSA Au=RSA Enc=DES(56) Mac=SHA1
EXP-EDH-RSA-DES-CBC-SHA SSLv3 Kx=DH(512) Au=RSA Enc=DES(40) Mac=SHA1 export
EXP-EDH-DSS-DES-CBC-SHA SSLv3 Kx=DH(512) Au=DSS Enc=DES(40) Mac=SHA1 export
EXP-DES-CBC-SHA SSLv3 Kx=RSA(512) Au=RSA Enc=DES(40) Mac=SHA1 export
EXP-RC2-CBC-MD5 SSLv3 Kx=RSA(512) Au=RSA Enc=RC2(40) Mac=MD5 export
EXP-RC4-MD5 SSLv3 Kx=RSA(512) Au=RSA Enc=RC4(40) Mac=MD5 export
Now, I have no idea if this is relevant to the errors I'm trying to solve. I tried a novice approach of simply changing the apache config from SSLProtocol ALL -SSLv2 to SSLProtocol ALL -SSLv3 but the error seemed to persist. Might anyone be able to give me some insight? Many thanks in advance.
I have a huge set of backup files, each containing a directory of Videos. Each video directory is slightly different. I would like to merge these into a single directory to conserve, as I don't really care about which backup each Video came from.
To do this, I figure that rsync would be the best tool but I'm having difficulty coming up with a nice clean script to rsync each backup's Video directory with an outside destination.
In other words, I want a script that will automate the following process
rsync -a ./Backups/Backup-x/Videos/ ./CollectedVideos/
rsync -a ./Backups/Backup-y/Videos/ ./CollectedVideos/
rsync -a ./Backups/Backup-z/Videos/ ./CollectedVideos/
rsync -a ./Backups/Backup-t/Videos/ ./CollectedVideos/
Where all files in the Backups/ directory are "fair game."
Any suggestions would be appreciated.
I'm attempting to compile a deb package using 12.04 but am unable to run a dpkg-depcheck on ubuntu 12.04. The command doesn't exist on the server I'm using and isn't a package in the repositories either. (It is, however, on my desktop machine) How might I install it?
Thanks in advance
I want to create a simple script that a user can download, click on, and it will:
- request their root password through some sort of pop-up interface
- then sudo apt-get install a package to their computer
- and finally, run a few other commands to configure said software.
I know all the necessary bash in order to install and configure the software, my problem is in getting it to run with a single click. (Sort of like a windows .exe installer).
How might this be accomplished?
I'm attempting to resolve some issues with my touchpad by getting the debugging output via this tutorial. One of the steps in the tutorial advises me to monitor the touchpad activity with the following command:
synclient -m 100
The problem is that the -m flag (denoting interval) was removed in the current version of synclient, as described in this AskUbuntu post. In summary, the solution suggested to downgrade Synclient to its earlier version (1.6) which, while a decent stopgap measure, isn't really a solution for the long haul.
My question is: how do I achieve the same effect in the Synclient 1.7 without the -m flag? I have to imagine that this is a rather fundamental function of the package and so it has to be in there somewhere.
I'm attempting to record a demo of the KDE desktop effects on my computer. All seems to be working well, except for when rotate the cube, at which point it gets choppy. See this video for an example. I've successfully pulled this off on other computers in the past but for some reason this one's giving me trouble. As my recorder I'm using Kazam and my graphics card is a GeForce 8400 GS. I've also tried this with RecordMyDesktop and have tried using Kazam to output the video to both mp4 and mpeg formats. Any ideas as to what might be going on?
I'm attempting to write a custom theme for 12.04 and would like to change the upper left-hand corner label for the desktop from "Ubuntu Desktop" to a simple icon. (See image)
)
In looking through the theme directories, it seems as though this is set somewhere else. Does anyone know where I might find it?
I'm attempting to get postfix running on my server but keep getting the following error in my /var/log/mail.log:
postfix/master[5041]: fatal: bind 0.0.0.0 port 25: Address already in use
I did some searching and found this excellent answer by Oli (regarding this very question) in which it's recommended that I basically rid my server of sendmail packages to avoid conflicts, then reinstall postfix, which will in turn install its own brand of sendmail. Unfortuantely it didn't quite solve the problem (see below for how).
I followed the instructions and ran the following check, to which I received an encouraging response:
$ dpkg -S `which sendmail`
postfix: /usr/sbin/sendmail
However when I started postfix again, I got the same error.
As per Oli's contingency, I looked for the process that was hogging port 25 with the following:
$ sudo netstat -pel | grep smtp
tcp 0 0 localhost.localdom:smtp *:* LISTEN root
35704126 27626/sendmail: MTA
But here's where it got confusing: I then looked for the process 27626 but was then told:
dpkg-query: no path found matching pattern 27626
connections.
I pulled up htop and was able to find the above PID associated with the following command:
sendmail:MTA: accepting connections
I then tried to kill the process with both killall sendmail and killall 27626 and kept getting no process found.
The problem is (besides the obvious) I don't know how to interpret these findings. I scrubbed the server of sendmail, so I can only assume that postfix's own version of sendmail is hijacking the port? I don't even know if that makes sense.
Anyway, if anyone could set me straight on this or at least give some interesting diagnostics questions, I'd appreciate it.
In case it's useful, I'm using virtualmin on the server to manage a few different domains and am also running wordpress.
Many thanks in advance!
In response to a request I've posted a ps -ef below
root@upsmart:~# ps -ef
UID PID PPID C STIME TTY TIME CMD
root 1 0 0 Jan12 ? 00:00:00 init
root 2 1 0 Jan12 ? 00:00:00 [kthreadd/20017]
root 3 2 0 Jan12 ? 00:00:00 [khelper/20017]
root 68 1 0 Jan12 ? 00:00:00 upstart-udev-bridge --daemon
root 75 1 0 Jan12 ? 00:00:00 /sbin/udevd --daemon
root 110 1 0 Jan12 ? 00:00:00 /usr/sbin/sshd -D
root 130 75 0 Jan12 ? 00:00:00 /sbin/udevd --daemon
root 131 75 0 Jan12 ? 00:00:00 /sbin/udevd --daemon
root 175 1 0 Jan12 ? 00:00:00 upstart-socket-bridge --daemon
116 205 1 0 Jan12 ? 00:00:03 dbus-daemon --system --fork --activation=upstart
root 385 1 0 Jan12 ? 00:00:00 /usr/sbin/dovecot -F -c /etc/dovecot/dovecot.conf
root 386 1 0 Jan12 ? 00:00:04 cron
mysql 410 1 0 Jan12 ? 00:08:06 /usr/sbin/mysqld
dovecot 441 385 0 Jan12 ? 00:00:00 dovecot/anvil
root 442 385 0 Jan12 ? 00:00:00 dovecot/log
root 444 385 0 Jan12 ? 00:00:00 dovecot/config
syslog 445 1 0 Jan12 ? 00:00:08 /sbin/syslogd -u syslog
bind 474 1 0 Jan12 ? 00:00:12 /usr/sbin/named -u bind
clamav 844 1 0 Jan12 ? 00:01:34 /usr/sbin/clamd
clamav 951 1 0 Jan12 ? 00:03:27 /usr/bin/freshclam -d --quiet
list 969 1 0 Jan12 ? 00:00:00 /usr/bin/python /usr/lib/mailman/bin/mailmanctl -s -q start
list 970 969 0 Jan12 ? 00:01:03 /usr/bin/python /var/lib/mailman/bin/qrunner --runner=ArchRunner:0:1 -
list 971 969 0 Jan12 ? 00:01:10 /usr/bin/python /var/lib/mailman/bin/qrunner --runner=BounceRunner:0:1
list 972 969 0 Jan12 ? 00:01:03 /usr/bin/python /var/lib/mailman/bin/qrunner --runner=CommandRunner:0:
list 973 969 0 Jan12 ? 00:01:07 /usr/bin/python /var/lib/mailman/bin/qrunner --runner=IncomingRunner:0
list 974 969 0 Jan12 ? 00:01:01 /usr/bin/python /var/lib/mailman/bin/qrunner --runner=NewsRunner:0:1 -
list 976 969 0 Jan12 ? 00:01:05 /usr/bin/python /var/lib/mailman/bin/qrunner --runner=OutgoingRunner:0
list 978 969 0 Jan12 ? 00:01:06 /usr/bin/python /var/lib/mailman/bin/qrunner --runner=VirginRunner:0:1
list 980 969 0 Jan12 ? 00:00:00 /usr/bin/python /var/lib/mailman/bin/qrunner --runner=RetryRunner:0:1
root 1410 1 0 Jan12 ? 00:00:00 /usr/sbin/saslauthd -a pam -m /var/spool/postfix/var/run/saslauthd -r
root 1413 1410 0 Jan12 ? 00:00:00 /usr/sbin/saslauthd -a pam -m /var/spool/postfix/var/run/saslauthd -r
root 2034 1 0 Jan12 ? 00:00:09 /usr/bin/perl /usr/share/usermin/miniserv.pl /etc/usermin/miniserv.con
proftpd 2054 1 0 Jan12 ? 00:00:07 proftpd: (accepting connections)
root 2096 1 0 Jan12 ? 00:00:13 /usr/bin/perl /usr/share/webmin/miniserv.pl /etc/webmin/miniserv.conf
root 2173 1 0 Jan12 ? 00:00:15 /usr/sbin/console-kit-daemon --no-daemon
root 2241 1 0 Jan12 ? 00:00:07 /usr/lib/policykit-1/polkitd --no-debug
root 4895 1 0 03:15 ? 00:00:00 /usr/sbin/xinetd -dontfork -pidfile /var/run/xinetd.pid -stayalive -in
www-data 6494 30181 0 03:41 ? 00:00:06 /usr/sbin/apache2 -k start
www-data 6497 30181 0 03:42 ? 00:00:06 /usr/sbin/apache2 -k start
www-data 6499 30181 0 03:42 ? 00:00:06 /usr/sbin/apache2 -k start
www-data 6500 30181 0 03:42 ? 00:00:07 /usr/sbin/apache2 -k start
root 9477 30027 0 05:09 pts/5 00:00:00 sudo ps -ef
root 9478 9477 0 05:09 pts/5 00:00:00 ps -ef
root 27626 1 0 02:44 ? 00:00:00 sendmail: MTA: accepting connections
root 27902 110 0 02:51 ? 00:00:01 sshd: root@pts/4
root 27998 27902 0 02:51 pts/4 00:00:01 -bash
root 29931 110 0 02:59 ? 00:00:03 sshd: root@pts/5
root 30027 29931 0 02:59 pts/5 00:00:00 -bash
root 30181 1 0 03:00 ? 00:00:02 /usr/sbin/apache2 -k start
www-data 30183 30181 0 03:00 ? 00:00:00 /usr/sbin/apache2 -k start
www-data 30636 30181 0 03:06 ? 00:00:13 /usr/sbin/apache2 -k start
I have run into a situation where I'd like to get my wireless working without the benefit of a monitor, by sshing in. I have KDE on the system, have enabled autologin for one of the users and would now like to set up the wireless to automatically connect without kwallet prompting me for a password. (That way I can ditch my ethernet cable and move my computer out of the way).
I assume that this requires me to store the password in an unencrypted file; that's just fine with me. I've run across some ways to do that via the gui (such as this solution) but, for my circumstances, I need to be able to pull this off via ssh.
Would anyone know how to accomplish this? It would be much appreciated.
I'm starting to use Screen in my terminal use (tired of sshing many times when I need to work) anyway, I'm finding that the Screen shortcuts conflict with some of my general gui shortcuts. The real problem child is Ctrl+A+Shift+S to tile. If Kopete's running in the background, it does something with that and then if Kopete isn't active, Konsole tells me:
Output has been suspended by presing Ctrl+S. Prerss Ctrl+Q to resume.
I assume I could just roll up my selves and spend a day really mapping out my hotkeys but I was wondering if there was a quick workaround for this in terminal (maybe escaping all hot-heys when inside the terminal or some such thing?)
Also, if you have any other setup tips, feel free to post them as well.
I have a situation where I'm looking to run a service restart a couple minutes after startup. The particulars as to why are as follows, but the essense of my question is basically captured in in that first sentence; how might I automatically execute a command some time after startup?
The details:
I'm using boinc in conjunction with my cuda-enabled graphics card. It all works great, except for the fact that when I start up my computer fresh I get a gpu missing error in the boinc manager. This is easily fixed with a sudo service boinc-client restart but this needs to be done whenever the computer starts up in order to engage the GPU. My hunch is that boinc is starting before the necessary graphics card drivers load. (Seems reasonable, right?) Anyway, if you know a more elegant way than I've proposed above to resolve this, I'm all ears but, as far as I'm concerned, restarting boinc like 2 minutes after the computer starts up is good enough for me.
Thanks for any insight!
I've been number crunching using boinc for several years now and I'm starting to get into more computational stuff that uses CUDA. I was wondering if there is a way to check which processes are making use of CUDA at any given point. I'm using an nvidia GeForce 8400 GS if it helps.
I've poked around a bit on the web and the best recommendation I got was to use nvidia-smi. However, upon some more poking around, I found that nvidia-smi only gives an output for some graphics cards (my GEFORCE is not among them). Hence the following output:
+------------------------------------------------------+
| NVIDIA-SMI 5.319.32 Driver Version: 319.32 |
|-------------------------------+----------------------+----------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
|===============================+======================+======================|
| 0 GeForce 8400GS Off | 0000:01:00.0 N/A | N/A |
| 30% 74C N/A N/A / N/A | 282MB / 511MB | N/A Default |
+-------------------------------+----------------------+----------------------+
+-----------------------------------------------------------------------------+
| Compute processes: GPU Memory |
| GPU PID Process name Usage |
|=============================================================================|
| 0 Not Supported |
+-----------------------------------------------------------------------------+
Any help or suggestions would be appreciated.
I've installed SoapUI by downloading it from its website (http://www.soapui.org/), but I would now like to uninstall it. However, it installed using its own little installer so I don't know what/where it added. Is there an elegant way to remove it or to remove a software that installs like this in general?