I am using Kubuntu 22.04.3. Whenever I open the terminal (or konsole), the following five lines are always displayed.
bash: enable: bash: not a shell builtin
bash: enable: completion: not a shell builtin
bash: enable: in: not a shell builtin
bash: enable: interactive: not a shell builtin
bash: enable: shells: not a shell builtin
I am not sure what these lines mean. Am I doing something wrong?
I am using Kubuntu 20.04. I added global menu to the panel. Most of the applications are using the global menu perfectly. But Gimp, Inkscape and Texmaker are not using the global menu at all.
How can I make these three applications to use the global menu?
Update: Gimp and Inkscape - both are installed from official snap. Texmaker was installed from official ubuntu repository using apt. GNU Image Manipulation Program version 2.10.20 Inkscape version 1.0 Texmaker version 5.0.3
My Kubuntu 20.04 faces choppy videos in browsers (firefox, chromium) as well as in VLC. The video freezes very frequently (once in every 5/6 seconds). But I do not have any problem with the audio of that same video file. I've added graphics driver from ppa:oibaf/graphics-drivers, but with no luck. Below is computer configuration:
OS: Ubuntu 20.04 LTS x86_64
Host: HP Spectre Pro x360 G1
Kernel: 5.4.0-40-generic
Shell: bash 5.0.17
Resolution: 2560x1440
DE: Plasma
WM: KWin
WM Theme: Layan
Theme: ChromeOSDark [Plasma], Mojave-dark-alt [GTK2/3]
Icons: McMuse-dark [Plasma], McMuse-dark [GTK2/3]
Terminal: konsole
Terminal Font: Ubuntu Mono 11
CPU: Intel i5-5200U (4) @ 2.700GHz
GPU: Intel HD Graphics 5500
Memory: 3112MiB / 7869MiB
Also following is the vainfo of my computer:
vainfo
libva info: VA-API version 1.7.0
libva info: Trying to open /usr/lib/x86_64-linux-gnu/dri/iHD_drv_video.so
libva info: Found init function __vaDriverInit_1_7
libva info: va_openDriver() returns 0
vainfo: VA-API version: 1.7 (libva 2.6.0)
vainfo: Driver version: Intel iHD driver for Intel(R) Gen Graphics - 20.1.1 ()
vainfo: Supported profile and entrypoints
VAProfileMPEG2Simple : VAEntrypointVLD
VAProfileMPEG2Main : VAEntrypointVLD
VAProfileH264Main : VAEntrypointVLD
VAProfileH264High : VAEntrypointVLD
VAProfileJPEGBaseline : VAEntrypointVLD
VAProfileH264ConstrainedBaseline: VAEntrypointVLD
VAProfileVP8Version0_3 : VAEntrypointVLD
Additional info.
Output of lspci -v | less :
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 5500 (rev 09) (prog-if 00 [VGA controller])
DeviceName: Onboard IGD
Subsystem: Hewlett-Packard Company HD Graphics 5500
Flags: bus master, fast devsel, latency 0, IRQ 47
Memory at b1000000 (64-bit, non-prefetchable) [size=16M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 3000 [size=64]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [d0] Power Management version 2
Capabilities: [a4] PCI Advanced Features
Kernel driver in use: i915
Kernel modules: i915
Output of lshw -numeric -C display :
*-display
description: VGA compatible controller
product: HD Graphics 5500 [8086:1616]
vendor: Intel Corporation [8086]
physical id: 2
bus info: pci@0000:00:02.0
version: 09
width: 64 bits
clock: 33MHz
capabilities: msi pm vga_controller bus_master cap_list rom
configuration: driver=i915 latency=0
resources: irq:47 memory:b1000000-b1ffffff memory:c0000000-cfffffff ioport:3000(size=64) memory:c0000-dffff
Output of glxinfo -B | less :
name of display: :0
display: :0 screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
Vendor: Intel (0x8086)
Device: Mesa Intel(R) HD Graphics 5500 (BDW GT2) (0x1616)
Version: 20.2.0
Accelerated: yes
Video memory: 3072MB
Unified memory: yes
Preferred profile: core (0x1)
Max core profile version: 4.6
Max compat profile version: 4.6
Max GLES1 profile version: 1.1
Max GLES[23] profile version: 3.2
OpenGL vendor string: Intel
OpenGL renderer string: Mesa Intel(R) HD Graphics 5500 (BDW GT2)
OpenGL core profile version string: 4.6 (Core Profile) Mesa 20.2.0-devel (git-8b8ffb1 2020-07-02 focal-oibaf-ppa)
OpenGL core profile shading language version string: 4.60
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL version string: 4.6 (Compatibility Profile) Mesa 20.2.0-devel (git-8b8ffb1 2020-07-02 focal-oibaf-ppa)
OpenGL shading language version string: 4.60
OpenGL context flags: (none)
OpenGL profile mask: compatibility profile
OpenGL ES profile version string: OpenGL ES 3.2 Mesa 20.2.0-devel (git-8b8ffb1 2020-07-02 focal-oibaf-ppa)
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20
My OS is Kubuntu 20.04.
I got this ugly "grey area" on the top corner of window. No matter what theme I use, this "grey effect" remains there.
I've installed some themes from System settings > Global themes > Get new global themes. But all the themes show this same problem.
Can anyone please help me out removing this?
I've just installed the Ubuntu 20.04. After that my builtin microphone is not working. Previously it was working perfectly with 18.04.4. Apart from that, I can hear the output sounds without any problem.
Here is my laptop configuration:
Here is the configuration of Settings > Sound
I am using pCloud on Ubuntu 18.04.1 for couple of days. I am trying to replace Dropbox as they will ditch the encrypted file system on Ubuntu.
The problem I noticed with pCloud is that, the icons are blury. Each and every single pCloud icons are blurry. Even the drop down menu bar icons of the top bar (at the left of the Dropbox icon) bar are blurry too. From the following screenshot you can see how blurry the pCloud icons are campared to the other icons. As an example, compare the firefox icon with the pCloud icon or compare the dropbox icon with the pCloud icon on the top right corner. Even the icons shown in the pCloud preferences/settings window are blurred. I've marked the icons with red arrows in the following image.
I've found that at /home/user_name/.local/share/icons/hicolor there are several icons of pCloud with different sizes (such as 128x128, 16x16, 24x24, 256x256, 32x32, 48x48, 512x512, 64x64, 96x96). May be these icons are not used properly. By the way, My screen resolution is 2560x1440 (16:9).
How can I mitigate this blurry icon problem?
For the convenience, a screenshot without the arrows is shown below.
As the screenshot shows, the Dropbox icon at the top panel in Xubuntu does not work along with the rest of the icon set. I am using Faenza icon set in this screenshot. But I've tried with other icon themes as well (such as obsidian, papirus etc) with the same result. Dropbox is not supporting the icon set. As a result the icon looks out of place. How can I make the Dropbox indicator icon to support the current icon theme?
I am using Xubuntu 18.04. Apart from this, the Dropbox itself works fine.
In DEB package, it is not possible to install an application in offline (in a computer which does not have any internet access). Because of the dependencies. In case of .snap, according to the OMG!Ubuntu, Snap packages can contain both application binary and any dependencies required for it to run.
Does it mean that, any .snap application can be installed in an offline pc (like the .dmg in MacOSX)? As there is no need to fetch any dependencies from the source.
I have a very little knowledge about the 'Snap packaging format'. What I know is that 'Snap' is an alternative packaging format like .deb.
What I don't know is
I was trying to get the page numbers in Bengali Language in LibreOffice. I've tried by enabling CTL from Tools > Options > Language Settings > Languages. Then from Tools > Options > Language Settings > Comples Text Layout > General Options, I selected Bengali (Bangladesh) from the Numerals. At this point, not only in the footer but also in the whole document, all numbers changed in to Bengali. But my aim was to change the language to Bengali of the page numbers in the footer only, not the whole document. To be frankly I did not find anything like this for LibreOffice, as there is in MS Word.
So, how can I change ONLY the page numbers into Bengali Language at the footer please?
UPDATE:
I tried to modify the Page Number character style, by setting its CTL language to Bengali. But it did not either.
I've just installed Ubuntu 13.04 in an old HP Pavilion dv2419us. The problem is, Ubuntu doesn't detect the wireless card. But it works fine in Windows 7.
The following command returns nothing!
lspci -vvnn | grep 14e4
And the lspci output is:
00:00.1 RAM memory: NVIDIA Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: NVIDIA Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: NVIDIA Corporation C51 Memory Controller 5 (rev a2)
00:00.4 RAM memory: NVIDIA Corporation C51 Memory Controller 4 (rev a2)
00:00.5 RAM memory: NVIDIA Corporation C51 Host Bridge (rev a2)
00:00.6 RAM memory: NVIDIA Corporation C51 Memory Controller 3 (rev a2)
00:00.7 RAM memory: NVIDIA Corporation C51 Memory Controller 2 (rev a2)
00:02.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1)
00:03.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1)
00:05.0 VGA compatible controller: NVIDIA Corporation C51 [GeForce Go 6150] (rev a2)
00:09.0 RAM memory: NVIDIA Corporation MCP51 Host Bridge (rev a2)
00:0a.0 ISA bridge: NVIDIA Corporation MCP51 LPC Bridge (rev a3)
00:0a.1 SMBus: NVIDIA Corporation MCP51 SMBus (rev a3)
00:0a.3 Co-processor: NVIDIA Corporation MCP51 PMU (rev a3)
00:0b.0 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3)
00:0b.1 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3)
00:0d.0 IDE interface: NVIDIA Corporation MCP51 IDE (rev f1)
00:0e.0 IDE interface: NVIDIA Corporation MCP51 Serial ATA Controller (rev f1)
00:10.0 PCI bridge: NVIDIA Corporation MCP51 PCI Bridge (rev a2)
00:10.1 Audio device: NVIDIA Corporation MCP51 High Definition Audio (rev a2)
00:14.0 Bridge: NVIDIA Corporation MCP51 Ethernet Controller (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
05:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller
05:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)
05:09.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a)
05:09.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05)
The command lspci -nn | grep 0280 gives no output.
Any suggestion regarding this?
In Ubuntu 13.10, the hotkeys/shortcut-keys (Ctrl+B, Ctrl+S etc) in LibreOffice are language dependent and work in English language only. While writing in any other language (i.e. any Cyrillic and/or any Bengali etc) it's impossible to use hotkeys, they just don't do anything. Switching to English input language enable hotkeys once again. This is very frustrating as user needs to switch language to save document, to make it bold, or italic, etc. This was not experienced in Ubuntu 13.04.
Steps to reproduce:
Error: Font weight does not get changed.
Expected: Font weight should change to bold.
Note: none other system hotkeys work as expected. I.e. Ctrl+S to save, or Ctrl+B to subscript, or Ctrl+I to italic etc.
Workaround: The only way is to -
The issue is critical, as it make writer very slow for keyboard-only typing.