Netmoon's questions

Here is my 500 GiB drive, partition scheme:



As you can see there is one unallocated partition that I created beside dev/sda2 with 80 GiB volume. dev/sda2 contains Windows7 Home Edition and I'm trying install Ubuntu 18.04 LTS beside windows 7. I have problem with Ubuntu installation because Ubuntu not shown partitions correctly:

Note:

• when I start GParted I got this error:
  

  Libparted Error : Can't have overlaping partitions.

• # sudo fdisk -l /dev/sda:
  

  Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
  Units: sectors of 1 * 512 = 512 bytes
  Sector size (logical/physical): 512 bytes / 4096 bytes
  I/O size (minimum/optimal): 4096 bytes / 4096 bytes
  Disklabel type: dos
  Disk identifier: 0xa0eb5b3a
  Device     Boot     Start       End   Sectors    Size Id Type
  /dev/sda1  *         2048   2081086   2079039 1015.2M  7 HPFS/NTFS/exFAT
  /dev/sda2         2081094 206050096 203969003   97.3G  7 HPFS/NTFS/exFAT
  /dev/sda3       373828832 701510872 327682041  156.3G  7 HPFS/NTFS/exFAT
  /dev/sda4       206050097 976769071 770718975  367.5G  f W95 Ext'd (LBA)
  /dev/sda5       206050160 373828823 167778664     80G  7 HPFS/NTFS/exFAT
  /dev/sda6       701528064 976769071 275241008  131.3G  7 HPFS/NTFS/exFAT
  Partition 2 does not start on physical sector boundary.
  Partition 4 does not start on physical sector boundary.
  Partition table entries are not in disk order.
  

Today I installed Ubuntu 18.04 x64 LTS on a Dell Latitude E6410i with Windows 7 pre-installed. I connected to my new JBL Flip4 speaker with Bluetooth 4.2 and with A2DP V1.3, AVRCP V1.6, HFP V1.6, and HSP V1.2, and paired it successfully.

I want to auto-connect to the speaker at login; it should connect every time I login to Ubuntu, but does not.

After study, I found suggestions on the web (like Autoconnect to a bluetooth speaker in Ubuntu 16.04), but I can't find rc.local in my system. Also, I installed bt-autoconnect which does not help.

How should I proceed to resolve this?

I have 5 web app projects in my local machine with Ubuntu 12.04 installed on it. Everything was good, but today when I started a new project with symphony, I found that I should upgrade php to 5.4.x, so I did it and upgraded to apache2 too. After these updates I restarted my PC [for some reasons] and now I see a 403 forbidden page (from apache2 web-server) for all of my projects.
I didn't change permissions or the Apache virtual host configuration, nothing and nothing. Just after restart I see 403 forbidden!

• I'm beginner in Ubuntu so if you want any information about users, groups, or... please say how can I find it for you, thanks
• I tried to change the whole web-root directory permission to 777 and change user:group to www-data or root, but nothing happened.
• APACHE 2.4.6
  PHP 5.5.5-1
• example, this is the thenetmoon project and it was done with symfony, but apache can't access the web folder :
  
  

sometimes i want to search specific string in terminal after running a command. for example, i run apt-get upgrade and i see outputs in terminal line by line:

Unpacking replacement procps ...
Preparing to replace apt-transport-https 0.8.16~exp12ubuntu10.12 (using .../apt-transport-https_0.8.16~exp12ubuntu10.15_amd64.deb) ...
Unpacking replacement apt-transport-https ...
Preparing to replace dosfstools 3.0.12-1ubuntu1 (using .../dosfstools_3.0.12-1ubuntu1.1_amd64.deb) ...
Unpacking replacement dosfstools ...
Preparing to replace python-problem-report 2.0.1-0ubuntu17.4 (using .../python-problem-report_2.0.1-0ubuntu17.6_all.deb) ...
Unpacking replacement python-problem-report ...
Preparing to replace python-apport 2.0.1-0ubuntu17.4 (using .../python-apport_2.0.1-0ubuntu17.6_all.deb) ...

and it goes on.
is there a way i search dosfstools string, right now; with shortcut or something else?

I know: easy way is, select the text in terminal and copy that to text editor and search for string. but if I do that more and more times, it makes me :-/

today i installed clementine on my PC with Ubuntu 12.04 installed on it. this application can recognize my iPod good, but there is a problem when i want to copy files to library; i don't have any option to do this.
in rhythmBox when i drag music category from device subcategory to library folder, everything done great.
is there anyway to do it in clementine?

I copied the apt source directory from /var/cache/apt/archives/ on my laptop (11.10) to my work PC (11.10). I then removed /var/lib/apt/lists/*.

Now when I try to update my pc from the terminal, it shows "Failed to fetch" errors. If f use the Ubuntu update manager to install updates, it says: "waiting for unattended-upgrade to exit", but no update happens. Now it won't update anything.

I'm using Ubuntu 11.10 and ssh for connecting to many servers daily, so I put their parameters in the .ssh/config file like this:

Host Home
User netmoon
Port 22
HostName test.com

Is there a way to put passwords for each connection in this file, so that, when the server asks for the password, the terminal enters its password and sends it to the server?

I need this because sometimes I'm away from the PC and when I get back, type a password, and press Enter the terminal says CONNECTION CLOSED.

P.S. I don't want to use a public/private key pair.

I've been tried to change group of the whole directory with code example below [bash terminal on ubuntu 11.10]:

chgrp apache -R ./test1

but failed and said :

chgrp: invalid group: `apache'

user and group in httpd.conf is set to "apache".

Sometimes the wireless connection is disconnected and turned off the computer must do to correct it.

A full update was done to try and fix this, and I searched many forums for this problem but i found nothing.

Here is my wireless information:

[0280]: Intel Corporation Centrino Advanced-N 6200 [8086:422c] (rev 35)