Home / user-60362

triunenature's questions

Martin Hope
triunenature
Asked: 2012-09-04 23:43:03 +0800 CST
  • 4

Ok, so if I have two Linux Machines (A and B) and I have a program on one, and want to run it on be I do:

  • user@LinuxA:~$ ssh -X LinuxB
  • user@LinuxB:~$ programName

(Displays on LinuxA machine)

Ok same thing, WindowsA LinuxB (Program on Linux)

  1. Start Xming X Server on Windows
  2. Run Putty, use x11 port forward with :0.0
  3. After connect to LinuxB, run program, it loads in Windows!

Now here is the question, WindowsA LinuxB, (Program on Windows)

Run Windows Program On Linux, using a windows resources.

How to make it work? BTW, I know it can because years ago, I read a white paper on it, but never actually tested it out.

x11
Martin Hope
triunenature
Asked: 2012-08-25 16:11:00 +0800 CST
  • 0

Windows 8, does the initial install, then says, system must restart.

Once it doesn't it just shows Windows in white, with an all black background. And just sits there.

Screenshot: enter image description here

I tried turning off the guest, and turning it back on. After about 5 attempts, it says the os has failed to load to many times, and you need to use recovery tools.

Im not sure why, every guide says its easy. Any ideas?

virtualbox
Martin Hope
triunenature
Asked: 2012-05-05 20:20:33 +0800 CST
  • 1

Output:

{User}@{Computer}:~$ sudo lshw -class network
{User}@{Computer}:~$

Another Test:

{User}@{Computer}:~$ lspci
00:00.0 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a1)
00:01.0 ISA bridge: NVIDIA Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: NVIDIA Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB controller: NVIDIA Corporation MCP61 USB 1.1 Controller (rev a3)
00:02.1 USB controller: NVIDIA Corporation MCP61 USB 2.0 Controller (rev a3)
00:04.0 PCI bridge: NVIDIA Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: NVIDIA Corporation MCP61 High Definition Audio (rev a2)
00:06.0 IDE interface: NVIDIA Corporation MCP61 IDE (rev a2)
00:07.0 Bridge: NVIDIA Corporation MCP61 Ethernet (rev a2) <<---- Network Card????
00:08.0 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2)
00:08.1 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2)
00:09.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:0b.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 FireWire (IEEE 1394): LSI Corporation FW322/323 (rev 70)
02:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9500 GT] (rev a1)

If you look at 00:07.0 I believe that is the network card. However lshw doesnt show it.

I mainly need information on network speed 10MBpS/100MBsP/1000MBpS

Though knowing why my system isn't working would be nice.

networking