realtek ALC3234 (dell inspiron15-3543) ubuntu 20.04.4 with low latency kernel 5.4.0 -104, jackd2 1.9.12, qjackctl 0.9.6.18 (qt 5.12.8). I start jack first with 44.1khz, 128 buffer, 2 periods, 5.8 msec. then ardour 6.9.0. and there is NO sound output. jackd2 diagram and error log below:
ANY HELP?
i am on ubuntu 20.04.3.tried to install qjackctl-0.9.6 (latest version) from source following instructions as given in https://qjackctl.sourceforge.io/
got the following errors:
mee@mee-Inspiron-3543:~$ cat /etc/apt/sources.list.d/nodesource.list
deb [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_12.x main
deb-src [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_12.x main
any help? tnx.
I am on Ubuntu 20.04. I am trying to install a syllable counting program from source.
Ref: https://github.com/words/syllable
From readme.md
This package is ESM only: Node 12+ is needed to use it and it must be
imported instead ofrequired.'' running the command:
$ node --version
v10.19.0
so i try to install a newer version of node but it fails:
~$ curl -fsSL deb.nodesource.com/setup_12.x | sudo -E bash - ## Installing the NodeSource Node.js 12.x repo... ## Populating apt-get cache... + apt-get update E: Malformed entry 1 in list file /etc/apt/sources.list.d/nodesource.list (Component) E: The list of sources could not be read. Error executing command, exiting –
any help?!
I am on Ubuntu 20.04.1 and I have a second hard drive: sdb1 (named mee_2) with one partition (FAT32). I used 'disks' to auto-mount it at start up. BUT as user I can not write on it... Which are the correct options to use when configuring auto-mount?
My last try was:
user,rw,nosuid,nodev,nofail,x-gvfs-name=mee_2,x-gvfs-icon=mee_2,x-gvfs-symbolic-icon=mee_2,x-gvfs-show,
I am using Ubuntu 18.04 on a Dell Inspiron. After updating I found myself with no WiFi adapter installed. I tried to restore the WiFi adapter by running this script I found on GitHub.
#!/bin/bash
printf "
Powered by:
___ _ ___ _
| _ \(_) __ | __|(_)__ __
| /| |/ _|| _| | |\ \ /
|_|_\|_|\__||_| |_|/_\_\
"
echo""
sudo cd /tmp/
sudo wget -c https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.1/linux-headers-5.1.0-050100_5.1.0-050100.201905052130_all.deb
sudo wget -c https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.1/linux-headers-5.1.0-050100-generic_5.1.0-050100.201905052130_amd64.deb
sudo wget -c https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.1/linux-image-unsigned-5.1.0-050100-generic_5.1.0-050100.201905052130_amd64.deb
sudo wget -c https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.1/linux-modules-5.1.0-050100-generic_5.1.0-050100.201905052130_amd64.deb
sudo dpkg -i *.deb
#Wifi drive install
sudo wget https://wireless.wiki.kernel.org/_media/en/users/drivers/iwlwifi/iwlwifi-cc-46.3cfab8da.0.tgz
sudo tar -xzvf iwlwifi-cc-46.3cfab8da.0.tgz
sudo cp iwlwifi-cc-46.3cfab8da.0/iwlwifi-cc-a0-46.ucode /lib/firmware/
echo "Please Reboot your pc"
~
After rebooting (as prompted to do once the script was executed), the wired connection sign disappeared from the taskbar as well. I opened the system settings/network connections and got this:
It seems I do have a connection but still no working internet connection!!!
Output of the Wireless Script:
########## wireless info START ##########
Report from: 10 Nov 2019 13:57 EET +0200
Booted last: 10 Nov 2019 00:00 EET +0200
Script from: 22 Oct 2018 03:34 UTC +0000
##### release ###########################
Distributor ID: Ubuntu
Description: Ubuntu 18.04.3 LTS
Release: 18.04
Codename: bionic
##### kernel ############################
Linux 5.1.0-050100-generic #201905052130 SMP Mon May 6 01:32:59 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
Parameters: ro, quiet, splash, vt.handoff=1
##### desktop ###########################
Unity
##### lspci #############################
06:00.0 Network controller [0280]: Broadcom Inc. and subsidiaries BCM43142 802.11b/g/n [14e4:4365] (rev 01)
Subsystem: Dell Wireless 1704 802.11n + BT 4.0 [1028:0016]
Kernel driver in use: bcma-pci-bridge
07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL810xE PCI Express Fast Ethernet controller [10ec:8136] (rev 07)
Subsystem: Dell RTL810xE PCI Express Fast Ethernet controller [1028:0655]
Kernel driver in use: r8169
##### lsusb #############################
Bus 001 Device 007: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 006: ID 0a5c:21d7 Broadcom Corp. BCM43142 Bluetooth 4.0
Bus 001 Device 004: ID 0c45:670b Microdia
Bus 001 Device 005: ID 045e:0084 Microsoft Corp. Basic Optical Mouse
Bus 001 Device 009: ID 0930:6545 Toshiba Corp. Kingston DataTraveler 102/2.0 / HEMA Flash Drive 2 GB / PNY Attache 4GB Stick
Bus 001 Device 003: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 002: ID 8087:8001 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 002: ID 03f0:e111 Hewlett-Packard
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
##### PCMCIA card info ##################
##### rfkill ############################
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
##### secure boot #######################
'mokutil' is not installed (package "mokutil").
##### lsmod #############################
dell_laptop 20480 0
ledtrig_audio 16384 3 snd_hda_codec_generic,snd_hda_codec_realtek,dell_laptop
dell_wmi 20480 0
dell_smbios 28672 2 dell_wmi,dell_laptop
dell_wmi_descriptor 20480 2 dell_wmi,dell_smbios
sparse_keymap 16384 1 dell_wmi
mxm_wmi 16384 1 nouveau
wmi_bmof 16384 0
bcma 61440 0
wmi 32768 6 dell_wmi,wmi_bmof,dell_smbios,dell_wmi_descriptor,mxm_wmi,nouveau
video 45056 4 dell_wmi,dell_laptop,i915,nouveau
##### interfaces ########################
[/etc/network/interfaces]
auto lo
iface lo inet loopback
##### ifconfig ##########################
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback <MAC address> brd <MAC address>
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp7s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
link/ether <MAC 'enp7s0' [IF1]> brd <MAC address>
inet 192.168.1.2/24 brd 192.168.1.255 scope global dynamic enp7s0
valid_lft 84452sec preferred_lft 84452sec
inet6 2a02:2149:8419:a900:48c4:2602:bb11:a9e2/64 scope global temporary dynamic
valid_lft 86354sec preferred_lft 43154sec
inet6 2a02:2149:8419:a900:929a:f7a2:5cd3:f74f/64 scope global dynamic mngtmpaddr noprefixroute
valid_lft 86354sec preferred_lft 43154sec
inet6 fe80::b2aa:4781:308f:8281/64 scope link
valid_lft forever preferred_lft forever
##### iwconfig ##########################
enp7s0 no wireless extensions.
lo no wireless extensions.
##### route #############################
default via 192.168.1.1 dev enp7s0 proto static metric 100
192.168.1.0/24 dev enp7s0 proto kernel scope link src 192.168.1.2 metric 100
##### resolv.conf #######################
[777 root '/etc/resolv.conf' -> '../run/systemd/resolve/stub-resolv.conf']
nameserver 127.0.0.53
options edns0
##### network managers ##################
Installed:
None found.
Running:
root 1159 1 0 13:24 ? 00:00:00 /snap/network-manager/379/usr/sbin/NetworkManager --config-dir=/var/snap/network-manager/379/conf.d/ --config=/snap/network-manager/379/etc/NetworkManager/NetworkManager.conf --log-level=INFO --no-daemon
##### NetworkManager info ###############
NetworkManager is not installed (package "network-manager").
##### NetworkManager.state ##############
cat: /var/lib/NetworkManager/NetworkManager.state: No such file or directory
##### NetworkManager config #############
[[/usr/lib/NetworkManager/conf.d/no-mac-addr-change.conf]]
[device-mac-addr-change-wifi]
match-device=driver:rtl8723bs,driver:rtl8189es,driver:r8188eu,driver:8188eu,driver:eagle_sdio,driver:wl
wifi.scan-rand-mac-address=no
wifi.cloned-mac-address=preserve
ethernet.cloned-mac-address=preserve
##### NetworkManager profiles ###########
##### Netplan config ####################
[/etc/netplan/01-network-manager-all.yaml]
network:
version: 2
renderer: NetworkManager
##### iw reg get ########################
Region: Europe/Athens (based on set time zone)
global
country 00: DFS-UNSET
(2402 - 2472 @ 40), (6, 20), (N/A)
(2457 - 2482 @ 20), (6, 20), (N/A), AUTO-BW, PASSIVE-SCAN
(2474 - 2494 @ 20), (6, 20), (N/A), NO-OFDM, PASSIVE-SCAN
(5170 - 5250 @ 80), (6, 20), (N/A), AUTO-BW, PASSIVE-SCAN
(5250 - 5330 @ 80), (6, 20), (0 ms), DFS, AUTO-BW, PASSIVE-SCAN
(5490 - 5730 @ 160), (6, 20), (0 ms), DFS, PASSIVE-SCAN
(5735 - 5835 @ 80), (6, 20), (N/A), PASSIVE-SCAN
(57240 - 63720 @ 2160), (N/A, 0), (N/A)
##### iwlist channels ###################
enp7s0 no frequency information.
lo no frequency information.
##### iwlist scan #######################
enp7s0 Interface doesn't support scanning.
lo Interface doesn't support scanning.
##### module infos ######################
[bcma]
filename: /lib/modules/5.1.0-050100-generic/kernel/drivers/bcma/bcma.ko
license: GPL
description: Broadcom's specific AMBA driver
srcversion: 9FF0F781F456EC613F149E3
depends:
retpoline: Y
intree: Y
name: bcma
vermagic: 5.1.0-050100-generic SMP mod_unload
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
##### module parameters #################
##### /etc/modules ######################
##### modprobe options ##################
[/etc/modprobe.d/amd64-microcode-blacklist.conf]
blacklist microcode
[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci
[/etc/modprobe.d/blacklist.conf]
blacklist evbug
blacklist usbmouse
blacklist usbkbd
blacklist eepro100
blacklist de4x5
blacklist eth1394
blacklist snd_intel8x0m
blacklist snd_aw2
blacklist i2c_i801
blacklist prism54
blacklist bcm43xx
blacklist garmin_gps
blacklist asus_acpi
blacklist snd_pcsp
blacklist pcspkr
blacklist amd76x_edac
[/etc/modprobe.d/blacklist-rare-network.conf]
alias net-pf-3 off
alias net-pf-6 off
alias net-pf-9 off
alias net-pf-11 off
alias net-pf-12 off
alias net-pf-19 off
alias net-pf-21 off
alias net-pf-36 off
[/etc/modprobe.d/intel-microcode-blacklist.conf]
blacklist microcode
[/etc/modprobe.d/iwlwifi.conf]
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
&& /sbin/modprobe -r mac80211
##### rc.local ##########################
grep: /etc/rc.local: No such file or directory
##### pm-utils ##########################
##### udev rules ########################
[/etc/udev/rules.d/70-snap.network-manager.rules]
# network-manager
KERNEL=="rfkill", TAG+="snap_network-manager_networkmanager"
# ppp
KERNEL=="ppp", TAG+="snap_network-manager_networkmanager"
# ppp
KERNEL=="tty[a-zA-Z]*[0-9]*", TAG+="snap_network-manager_networkmanager"
TAG=="snap_network-manager_networkmanager", RUN+="/usr/lib/snapd/snap-device-helper $env{ACTION} snap_network-manager_networkmanager $devpath $major:$minor"
##### dmesg #############################
[ 63.488988] r8169 0000:07:00.0 enp7s0: Link is Down
[ 65.245800] r8169 0000:07:00.0 enp7s0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 65.245810] IPv6: ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready
########## wireless info END ############
i am trying to flash a sonyxperia sp5303 using flash tools and the original firmware by sony (Sony_Xperia_SP_C5303_12.0.A.1.257_Customized_NCB_(by_xperiastockrom.com))
i installed flashtools and run it from the terminal hit the 'flash' button, connected the device through usb holding the volume down button and here is the log...
any help? do i have to 'prepare' the firmware somehow???
thanx network!
i am running ubuntu 18.04 and i want to install the sony flash tools app in order to flash an xperia sm5303.
i found and downloaded on my desktop the following 2 files:
a) SP Flash Tool v5.1752 Linux
https://www.t-flash.net/download-sp-flash-tool-latest-version-windows-linux/
b) flashtool-0.9.25.0-linux
http://www.flashtool.net/downloads_linux.php
i extracted them from the original .tar folders but couldnot find a readme file in either case...i then opened a terminal and 'cd' ed to the directory and tried to
./configure and/or make
but no luck...
any help on how to install the specific apps??? would appreciate detailed step by step instructions!
thanks community! )
I have been running ubuntu 16.04.3 on a macbook (single boot) for sometime.
Since yesterday, the laptop does not boot.
Ι have some small .mus files saved on the desktop that I need to recover.
Can i somehow access them if I boot from a 'live usb' ?
And how can i save them to the usb and/or upload them on my 'cloud' drive?
Thanks a lot,
please let me know if i should provide more info!
i want to install lubuntu-14.04.1-desktop-amd64+mac on a macbook 3.1 that currently has ubuntu 17.04.
i created a bootable usb (sandisk 16GB) using start up disk creator on a dell inspiron that runs ubuntu 16.04. i checked the usb on the dell and it booted just fine. i tried lubuntu without installing it.
i did the exact same thing on another usb (kingston 1GB) and again checked it out on the dell. worked fine too
when i plug either usb drive on the macbook and boot holding the 'option' key down i end up on a 'boot menu' screen with only a 'windows' named hard drive as an option...
any ideas why the macbook refuses to 'see' the usb disks???
thanks a lot
I have a MacBook "Core 2 Duo" 2.2 13" (White-SR) 2.2 GHz Core 2 Duo (T7500) with single boot - Ubuntu 17.04 on.
I want to make a fresh installation of Lubuntu 14.04.1 LTS (mac) from a DVD.
I have tried to start the laptop holding the 'c' key down until the DVD drive starts and then release it but no luck. I also tried holding the 'option' key down and that gets me to a 'menu' with the only option to start from a hard drive named 'windows' (?) but no DVD drive option. If the hard drive is selected the system does not boot.
**pressing 'esc' during the boot process gets me to the grub menu and/or console. anything i can do from here? **
p.s. I also tried with another .iso CD that I know for sure works and did not get any results. so probably it's not the specific DVDisc that causes the problem.
thanks for reading!
Can anyone help me with installing Pidgin 2.12.0 on Ubuntu 16.04?
Either by providing a PPA or with building from source?
The third alternative would be to upgrade to 17.04 and use the inbuilt reps which I'd rather not do.
i run ubuntu 16.04 and i am trying to execute 'minecraft.jar' located at my desktop. i right click and choose to open it using 'JDK java 8 runtime' but no luck. i then try to execute from the terminal:
s@s-Inspiron-3543:~/Desktop$ java -jar Minecraft.jar
and get the following message:
The program 'java' can be found in the following packages:
* default-jre
* gcj-5-jre-headless
* openjdk-8-jre-headless
* gcj-4.8-jre-headless
* gcj-4.9-jre-headless
* openjdk-9-jre-headless
Try: sudo apt install <selected package>
so, i installed and again i get the same... when i check for the java version:
s@s-Inspiron-3543:~$ update-java-alternatives -l
i get either
java-1.8.0-openjdk-amd64 1081 /usr/lib/jvm/java-1.8.0-openjdk- amd64
or if i use the 'java version' again i am told where to install it from...
any ideas???
thanks in advance : )
When I run audacity I get the following error message:
The system has detected that another copy of Audacity is running. Running two copies of Audacity simultaneously may cause data loss or cause your system to crash.Use the New or Open commands in the currently running Audacity process to open multiple projects simultaneously.
I checked the system's monitor and there is NO audacity process running. At least not one that I can spot.
I rebooted and nothing happened.