kannzzmm2's questions

After the third wake up, the sound on Line Out(Headphones) and Mic do not work on my Desktop with Ubuntu 20.04 LTS (fresh install, no upgrade), which are connected on the rear site. They also disappear from Settings --> Sound --> Output shows only HDMI/ DisplayPort 2 (which works) and Input (for Mic) is empty.

I get the following errors on the screen after wake up and also when I run dmesg:

[ 5799.219854] snd_hda_intel 0000:01:00.1: spurious response 0x80000000:0x0, last cmd=0x5f2f07
[ 5799.219855] snd_hda_intel 0000:01:00.1: spurious response 0x80000000:0x0, last cmd=0x5f2f07
[ 5799.219856] snd_hda_intel 0000:01:00.1: spurious response 0x80000000:0x0, last cmd=0x5f2f07
[ 5799.219856] snd_hda_intel 0000:01:00.1: spurious response 0x80000000:0x0, last cmd=0x5f2f07
[ 5799.219857] snd_hda_intel 0000:01:00.1: spurious response 0x80000000:0x0, last cmd=0x5f2f07
[ 5799.219857] snd_hda_intel 0000:01:00.1: spurious response 0x80000000:0x0, last cmd=0x5f2f07
[ 5799.219858] snd_hda_intel 0000:01:00.1: spurious response 0x80000000:0x0, last cmd=0x5f2f07
[ 5799.219858] snd_hda_intel 0000:01:00.1: spurious response 0x80000000:0x0, last cmd=0x5f2f07
[ 5799.219859] snd_hda_intel 0000:01:00.1: spurious response 0x80000000:0x0, last cmd=0x5f2f07
[ 5799.219859] snd_hda_intel 0000:01:00.1: spurious response 0x80000000:0x0, last cmd=0x5f2f07

lscpi -v:

01:00.1 Audio device: NVIDIA Corporation TU106 High Definition Audio Controller (rev a1)
Subsystem: ASUSTeK Computer Inc. TU106 High Definition Audio Controller
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at a4080000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel

alsamixer shows that Headphone and Rear Mic are muted:

Specs:

I also tried adding different options on /etc/modprobe.d/alsa-base.conf at the end options snd-hda-intel dmic_detect=0, options snd-hda-intel model=auto, options snd-hda-intel model=generic, options snd-hda-intel single_cmd=1 but the issue is still available.

Running this fixes the issue:

pulseaudio -k && sudo alsa force-reload

However I dont want this to run everytime there is no sound. Does someone know how to fix this ?

I created a NTFS partition for all my files to use in Ubuntu and Windows, and every directory and file is marked as green, even if I create new directory.

I tried with chmod and chown, adding uid=1000,gid=1000,group=1000 in Edit Mount Options but nothing from these solved the problem.

How can I fix this ? Thank you.

I have installed Ubuntu 18.04 on Lenovo Yoga C740, and scrolling on Firefox is not possible with the Pen and when touching. I also tried to use One Note online, and I can't write with the Pen, it can only select.

Can you please help me to the install the necessary drivers ? Thank you.

xinput --list

    ⎡ Virtual core pointer                      id=2    [master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer                id=4    [slave  pointer  (2)]
⎜   ↳ MSFT0001:01 04F3:3113 Touchpad            id=9    [slave  pointer  (2)]
⎜   ↳ Wacom HID 51EF Pen stylus                 id=10   [slave  pointer  (2)]
⎜   ↳ Wacom HID 51EF Finger touch               id=11   [slave  pointer  (2)]
⎜   ↳ Wacom HID 51EF Pen eraser                 id=14   [slave  pointer  (2)]
⎣ Virtual core keyboard                     id=3    [master keyboard (2)]
    ↳ Virtual core XTEST keyboard               id=5    [slave  keyboard (3)]
    ↳ Video Bus                                 id=6    [slave  keyboard (3)]
    ↳ Power Button                              id=7    [slave  keyboard (3)]
    ↳ Integrated Camera: Integrated C           id=8    [slave  keyboard (3)]
    ↳ Ideapad extra buttons                     id=12   [slave  keyboard (3)]
    ↳ AT Translated Set 2 keyboard              id=13   [slave  keyboard (3)]

When I connect to my laptop external Monitor, and every application that I open in full window size (on the laptop screen) it does not have the top bar (minimize,maximize, close).

I was using Gnome and after I installed Ubuntu-Budgie Desktop this is happening, and also some keyboard shortcuts don't work.

How can i fix this ?

Thank you.

After I choose Ubuntu from the GRUB menu which appears on the primary monitor, the login screen appears on the second monitor which is something that I don't want.

How can I prevent this, so that everything appears on the primary monitor?

Wired Connection on Ubuntu 18.04 keeps disconnecting every 5 min or also on high bandwith usage. I changed the cable and its still the same problem. When I use the same cable on older laptop it's working well. I found the following syslog:

Apr 28 20:41:42 sys-19 kernel: [   99.772408] e1000e: eno2 NIC Link is Down

-

 *-network:1
   description: Ethernet interface
   product: Ethernet Connection (7) I219-V
   vendor: Intel Corporation
   physical id: 1f.6
   bus info: pci@0000:00:1f.6
   logical name: eno2
   version: 10
   serial: 04:23:26:d3
   size: 100Mbit/s
   capacity: 1Gbit/s
   width: 32 bits
   clock: 33MHz
   capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
   configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=3.2.6-k duplex=full firmware=0.5-4 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s
   resources: irq:123 memory:a1200000-a121ffff



lspci -knn | grep Eth -A2

Ethernet controller [0200]: Intel Corporation Ethernet Connection (7) I219-V [8086:15bc] (rev 10)
Subsystem: ASUSTeK Computer Inc. Ethernet Connection (7) I219-V [1043:8672]
Kernel driver in use: e1000e
Kernel modules: e1000e

Please, help me to fix this issue. Thank you..

I have problem with the Wired Connection on Ubuntu 18.04 which keeps disconnecting after a while.I chaged the Ethernet Cable but it happens again.

Mainboard Asus Z390 E Gaming

sudo lshw -c network

description: Ethernet interface
   product: Ethernet Connection (7) I219-V
   vendor: Intel Corporation
   physical id: 1f.6
   bus info: pci@0000:00:1f.6
   logical name: eno2
   version: 10
   serial: 04:92
   size: 100Mbit/s
   capacity: 1Gbit/s
   width: 32 bits
   clock: 33MHz
   capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
   configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=3.2.6-k duplex=full firmware=0.5-4 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s
   resources: irq:123 memory:a1200000-a121ffff

/etc/network/interfaces

# interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback

Please help me to fix this. Thank you !

UPDATE Here is the status of sudo service network-manager status before the Wired connection was working and after it got disconnected.

https://pastebin.com/fpLYyqXp

After I changed the settings for wired connection using nm-connection-edtior to connect automatically to the Vpn after system startup or after the system is turned on from suspend mode Im not able to connect to the Wired Connection automatically and I get the following error: Connecton failed -> Activation of network connection failed

Your help is appreciated. Thanks.

Everytime I use Vpn I need to connect to the VPN manually using different countries.

Is there a way to connect to the VPN automatically after the system starts on Ubuntu 18.04? Thanks.

The keyboard is not working on my laptop when the system wakes up from suspend mode or when I close the lid and then reopen.

I made a little edit on the grub file, where I added this line:

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash atkbd.reset"

and still its the same problem. Please help me to fix this.

SONY VAIO SVE 1511

The keyboard is not working on my Laptop when the system wakes up from suspend mode or when I close the Lid and then reopen.

I made a little edit on the grub file, where I added this Line: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash atkbd.reset"

and again I have the same problem. Does someone know how to fix this ? Thanks.

I deleted the "Templates" folder some time ago. Yesterday I made new Templates folder and I created a template for an empty document, but it's not working.

Does someone know how to restore the Templates folder, or how to fix this?

I have installed Ubuntu 18.04 alongside Windows 10 and today three times while I was working the Laptop shuts down unexpected. I was trying to find something in /var/log but i didn't find what caused the Laptop to shut down. I changed also the Nvidia Driver-390 in Additional Driveras default.

One month ago, only Windows 10 was installed and the same thing was happening. The Laptop was in repair and they changed only the SSD because it had some deffect and updated the Bios Version.

Can you help me please to find what's the problem ? It's something with the Hardware or with OS Ubuntu ?

Acer Aspire F5-771G Intel Core i7 16 GB DDR4 Memory SSD 256GB HDD 1TB