Johnsandman's questions

service pcscd status × pcscd.service - PC/SC Smart Card Daemon Loaded: loaded (/lib/systemd/system/pcscd.service; indirect; vendor preset: enabled) Active: failed (Result: exit-code) since Fri 2022-04-29 10:41:43 CEST; 14min ago TriggeredBy: × pcscd.socket Docs: man:pcscd(8) Process: 4293 ExecStart=/usr/sbin/pcscd --foreground --auto-exit $PCSCD_ARGS (code=exited, status=1/FAILU> Main PID: 4293 (code=exited, status=1/FAILURE) CPU: 1ms

apr 29 10:41:43 tvnr-home systemd[1]: Started PC/SC Smart Card Daemon. apr 29 10:41:43 tvnr-home pcscd[4293]: 00000000 configfile.l:163:evaluatetoken() Error with library /usr/lib/> apr 29 10:41:43 tvnr-home pcscd[4293]: 00000046 pcscdaemon.c:830:clean_temp_files() Cannot remove /run/pcscd/> apr 29 10:41:43 tvnr-home systemd[1]: pcscd.service: Main process exited, code=exited, status=1/FAILURE apr 29 10:41:43 tvnr-home systemd[1]: pcscd.service: Failed with result 'exit-code'. apr 29 10:41:43 tvnr-home systemd[1]: pcscd.service: Start request repeated too quickly. apr 29 10:41:43 tvnr-home systemd[1]: pcscd.service: Failed with result 'exit-code'. apr 29 10:41:43 tvnr-home systemd[1]: Failed to start PC/SC Smart Card Daemon.

Bus 001 Device 004: ID 076b:3021 OmniKey AG CardMan 3021 / 3121

How can i get it working again ? Something went wrong and can't find anything

The screen of firefox is somehow invisible. I relooad and reinstall firefox but stil the screen is gone. I can see the menu but really hard to find. You can see the background of my desktop really strange behaviour and i can't find out what is going on. See pic

I have a two monitor screen connected, but since the update of the Nvidia 460 I can only use one monitor, and the other monitor is black. When I reset it to Nouveau both screens are there. What can I do to get this back?

xrandr
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
DP-0 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
HDMI-0 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 531mm x 299mm
   1920x1080     60.00*+  59.94    50.00  
   1680x1050     59.95  
   1600x1200     60.00  
   1440x900      59.89  
   1280x1024     60.02  
   1280x960      60.00  
   1280x720      59.94    50.00  
   1152x720      60.00  
   1024x768      60.00  
   800x600       60.32    56.25  
   720x576       50.00  
   720x480       59.94  
   640x480       59.94    59.93  

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 440.82

Section "ServerLayout"

# Removed Option "Xinerama" "0"
# Removed Option "Xinerama" "1"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    Screen      1  "Screen1" 2049 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Idek Iiyama PLX2483H"
    HorizSync       30.0 - 83.0
    VertRefresh     55.0 - 76.0
    Option         "DPMS"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "Idek Iiyama PLX2481H"
    HorizSync       30.0 - 83.0
    VertRefresh     55.0 - 76.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1650"
    BusID          "PCI:1:0:0"
    Screen          0
EndSection

Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1650"
    BusID          "PCI:1:0:0"
    Screen          1
EndSection

Section "Screen"

# Removed Option "metamodes" "HDMI-0: nvidia-auto-select +0+0"
# Removed Option "metamodes" "HDMI-0: 1920x1080_60 +0+0"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "nvidiaXineramaInfoOrder" "DFP-2"
    Option         "metamodes" "HDMI-0: nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"

# Removed Option "metamodes" "HDMI-1: nvidia-auto-select +0+0 {AllowGSYNC=Off}"
# Removed Option "metamodes" "HDMI-1: nvidia-auto-select +0+0 {ForceCompositionPipeline=On, ForceFullCompositionPipeline=On, AllowGSYNC=Off}"
# Removed Option "metamodes" "HDMI-1: nvidia-auto-select +0+0 {AllowGSYNC=Off}"
# Removed Option "metamodes" "HDMI-1: 1920x1080_60_0 +0+0 {AllowGSYNC=Off}"
# Removed Option "metamodes" "HDMI-1: nvidia-auto-select +0+0 {AllowGSYNC=Off}"
# Removed Option "metamodes" "HDMI-1: 1920x1080_60 +0+0 {AllowGSYNC=Off}"
    Identifier     "Screen1"
    Device         "Device1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "nvidiaXineramaInfoOrder" "DFP-3"
    Option         "metamodes" "HDMI-1: nvidia-auto-select +0+0 {AllowGSYNC=Off}"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Extensions"
    Option         "(null)" "Disable"
EndSection

In Kubuntu 20.04, I have to put the cable of the wired network in and out for have to wire on.

Of course, I can also do sudo nmcli networking off/ on this will work too. I cannot find the issue of what is going on and why it doesn't get automatically. If using WiFi, I have also to fill in the kwallet. This is really strange.

Everything works perfectly accept the automatic online. Using commands and it works.

What could be a problem here?

Do you know it? Where are the configs of the network manager besides in the root? Is there also somewhere in the home dir?

I hope someone can give me some ideas to resolve this.

I cannot find any solution.

Output of journalctl:

mei 21 11:33:30 tvnr systemd[1]: Starting LSB: minidlna server...
mei 21 11:33:31 tvnr systemd[1]: Started LSB: minidlna server.

Output of service minidlna status:

    minidlna.service - LSB: minidlna server
     Loaded: loaded (/etc/init.d/minidlna; generated)
     Active: active (exited) since Thu 2020-05-21 11:36:26 CEST; 11s ago
       Docs: man:systemd-sysv-generator(8)
    Process: 4934 ExecStart=/etc/init.d/minidlna start (code=exited, status=0/SUCCESS)

mei 21 11:36:26 tvnr systemd[1]: Starting LSB: minidlna server...
mei 21 11:36:26 tvnr systemd[1]: Started LSB: minidlna server.

Output of pgrep minidlna|xargs ps:

    PID TTY      STAT   TIME COMMAND
   1388 ?        Ssl    0:00 minidlnad -f /var/snap/minidlna-escoand/19/minidlna.conf -P /var/snap/minidlna-escoand/common/minidlna.pid

I tried to change /etc:default and added mijn username, but there is no change:

# Defaults for minidlna initscript
# sourced by /etc/init.d/minidlna
# installed at /etc/default/minidlna by the maintainer scripts

# These options can be set to modify the behavior of the minidlna init script.
# The options commented out show the default values.

# Start the daemon if set to "yes"
START_DAEMON="yes"

# Path to the configuration file
CONFIGFILE="/etc/minidlna.conf"

# Path to the log file
#LOGFILE="/var/log/minidlna.log"

# User and group the daemon should run as
USER="gerda-johan"
#GROUP="minidlna"

# Additional options that are passed to the daemon
# We pass -r option to do soft non-destructive rebuild on every start-up.
# If your systerm restarts often, you might want to remove this.
DAEMON_OPTS="-r"

I cannot understand what is wrong?
It is working and the database exist, but I cannot see anything here :(

Maybe a little help can do a lot :)