I cannot see my Garmin 72h on open CPN.
I have it connected to an USB port.
I run lsblk:
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
mmcblk0rpmb 179:24 0 4M 0 disk
mmcblk0boot0 179:8 0 4M 1 disk
mmcblk0boot1 179:16 0 4M 1 disk
mmcblk0 179:0 0 29,1G 0 disk
├─mmcblk0p1 179:1 0 27,2G 0 part /
├─mmcblk0p2 179:2 0 1K 0 part
└─mmcblk0p5 179:5 0 1,9G 0 part [SWAP]
~$ df
Filesystem 1K-blocks Used Available Use% Mounted on
udev 944220 0 944220 0% /dev
tmpfs 193084 6044 187040 4% /run
/dev/mmcblk0p1 27978924 15904344 10630280 60% /
tmpfs 965416 36696 928720 4% /dev/shm
tmpfs 5120 4 5116 1% /run/lock
tmpfs 965416 0 965416 0% /sys/fs/cgroup
tmpfs 193084 16 193068 1% /run/user/1000
~$ sudo lsusb
Bus 001 Device 002: ID 8087:07e6 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 003: ID 04f2:b469 Chicony Electronics Co., Ltd
Bus 002 Device 005: ID 0489:e078 Foxconn / Hon Hai
Bus 002 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 002 Device 013: ID 091e:0003 Garmin International GPS (various models)
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
The Garmin does appear on
Bus 002 Device 013.
Still, when I go to System Information and check the USB Devices, the Garmin does not appear and in OpenCpn/options/connections/serials/Data port I cannot see the Garmin USB or select anything.
And Opencpn doesn't read the Garmin (which has been successfully mounted with no hassle on a windows computer...).
Any suggestions are highly appreciated and the advisers highly blessed. Thanks.