I have a problem with reinstalling OS on a DL360G5.
The BIOS [F9] do not detect any disc controllers and the HP SmartSetup did not find any compatible controllers.
Inside the server, the two SCSI disks are conncted to a RAID controller using BCM8603 chipset.
How is disc contoller supposed to be setup? I have tried to do a full BIOS reset.
EDIT
At the moment we suspect that the Smart Array controller E200i/412205-001 is broken.
Are there any status LED's that indicate failure or success during start up? At the moment all LED's are off.
2010-03-22, We have not made any progress so far. The SmartArray controller is suspect to be broken.
It is not in the BIOS of the motherboard. Use the BIOS of the RAID controller.
Boot the server and wait until the disk controller BIOS messages shows and press the combination that you find in the message.
If you do not see your RAID controller than it might be not work. Unplug the server, then open the server and try to reseat the card into the slot.
Are you trying to re-install the same OS as before?
If it's a Windows Server OS you are trying to install, while the setup is loading you can press F6 to load the appropriate RAID controller drivers:
(source: gur.in)
Where you download the drivers is up to you, Google is your friend. By the way you will need to place the drivers on a Floppy disc.