RouterOS shell command result with Ansible is different?

You will see, I have a little problem with the execution of an Ansible task, since I am giving it the same command that I work with in the Mikrotik shell, but the result is a little different and I just don't understand why.

You will see, I am trying to write a few concrete subnets to make permissive passage with SSH from those subnets, a "Available From" of all life, to allow connection only from the subnets that I indicate.

The execution of the command from the Mikrotik shell is as follows:

/ip service set ssh address=10.0.0.0/8,172.16.0.0/12,19
2.168.0.0/16

And the result is the following:

- hosts: Mikrotik-Routers_TestSenseLlum
  remote_user: admin
  gather_facts: no
  connection: network_cli
  tasks:

    - name: Allow ssh only inside the private networks
      routeros_command:
        commands: /ip service set ssh address=10.0.0.0/8,172.16.0.0/12,192.168.0.0/16

The result is wrong, only enter the first subnet, 10, but the others, do not enter them.

I don't know exactly what the problem is, has something similar happened to someone?