Home / server / Questions / 1028577
In Process
Albert Smirnov
Asked: 2020-08-03 02:40:11 +0800 CST

Can't reach IMM on IBM x3650 M3

  • 772

I have IBM x3650 M3 server 7979B9G. My issue is I can't reach the IMM interface via network (can't ping , no link Act led)

I tried to configure IMM in multiple ways, but dedicated ethernet port doesn't seem to show any activity (all leds are off). May be I need some IMM module installed? How should I check it ?

Checked LAN cable with ETH01 port:

enter image description here

It's working. So I used the same cable with IMM:

enter image description here

As you see no activity

Here's my config:

enter image description here

enter image description here

ibm imm2

1 Answers

  1. I'm thinking this is a hardware issue, as you show us on the first picture when you connect the UTP on the ethernet channel, it is linking (the green light), but as you can see in the picture down, the IMM port ins't linked.

    image with cable IMM

    So, this is probably the port hasn't a correct behaviour, that's the reason you're not reaching the IP.

    • 0