Cannot virsh start my VM after a reboot of physical machine..error only a single IDE controller is supported?

I have a VM running under kvm (it is a .img file), the server it runs on crashed hard and restarted and finally got things up... I think I goofed and ran

yum install -y qemu-kvm

Which I am sure updated a ton of stuff on a very old unpdated os. I had issues after this machine died having it see vms were there like the KVM itself (the image files were there but they were not 'registered' anywhere). Not sure how I got that back but all the VMS did virsh start but one...it gives an error:

[root@sdss4-server1 ~]# virsh start sdss-host2
setlocale: No such file or directory
error: Failed to start domain sdss-host2
error: unsupported configuration: Only a single IDE controller is supported for this machine type

Did my file get corrupted? Can I repair it? I would LOVE to get this VM running again as there was no backup and some of the data needs to get off it. (I thought I could mount .img files in linux somehow? but I tried the following)

kpartx -av sdsshost2.img
add map loop0p1 (253:2): 0 208782 linear /dev/loop0 63
add map loop0p2 (253:3): 0 10490445 linear /dev/loop0 208845
device-mapper: resume ioctl on loop0p3  failed: Invalid argument
create/reload failed on loop0p3
add map loop0p3 (0:0): 0 62916711 linear /dev/loop0 10699290


[root@sdss4-server1 vm-cache]# sudo mount /dev/mapper/loop0p2 /mnt/host2
mount: unknown filesystem type 'swap'

[root@sdss4-server1 vm-cache]# sudo mount /dev/mapper/loop0p1 /mnt/host2

(I think this is a boot and the files in it are:)


System.map                      initrd-2.4.21-27.0.2.EL.img             vmlinux-2.4.21-27.0.2.ELsmp
System.map-2.4.21-27.0.2.EL     initrd-2.4.21-27.0.2.ELsmp.img          vmlinux-2.4.21-32.0.1.EL
System.map-2.4.21-27.0.2.ELsmp  initrd-2.4.21-32.0.1.EL.img             vmlinux-2.4.21-32.0.1.ELsmp
System.map-2.4.21-32.0.1.EL     initrd-2.4.21-32.0.1.ELsmp.3w-9xxx.img  vmlinuz-2.4.21-27.0.2.EL
System.map-2.4.21-32.0.1.ELsmp  initrd-2.4.21-32.0.1.ELsmp.img          vmlinuz-2.4.21-27.0.2.ELsmp
config-2.4.21-27.0.2.EL         initrd-2.4.21-52.ELBOOT.img             vmlinuz-2.4.21-32.0.1.EL
config-2.4.21-27.0.2.ELsmp      kernel.h                                vmlinuz-2.4.21-32.0.1.ELsmp
config-2.4.21-32.0.1.EL         message                                 vmlinuz-2.4.21-52.ELBOOT
config-2.4.21-32.0.1.ELsmp      message.ja
grub                            vmlinux-2.4.21-27.0.2.EL

Certainly not what I was looking for, it appears the loop0p3 is what I want to mount but the kpartx gives an error on that I do not understand fully.

So is my virtual drive/disk bad? Anything I can do to recover this some how?

The hosts definition file:

<domain type='kvm'>
  <name>sdss-host2</name>
  <uuid>36637cc5-63a1-4485-9a41-31afafb352dd</uuid>
  <memory unit='KiB'>4194304</memory>
  <currentMemory unit='KiB'>4194304</currentMemory>
  <memoryBacking>
    <hugepages/>
  </memoryBacking>
  <vcpu placement='static' cpuset='21'>1</vcpu>
  <cputune>
    <emulatorpin cpuset='21'/>
  </cputune>
  <os>
    <type arch='x86_64' machine='pc-i440fx-rhel7.0.0'>hvm</type>
    <boot dev='hd'/>
  </os>
  <features>
    <acpi/>
    <apic/>
    <pae/>
  </features>
  <cpu mode='custom' match='exact' check='partial'>
    <model fallback='allow'>coreduo</model>
    <vendor>Intel</vendor>
  </cpu>
  <clock offset='utc'/>
  <on_poweroff>destroy</on_poweroff>
  <on_reboot>restart</on_reboot>
  <on_crash>restart</on_crash>
  <devices>
    <emulator>/usr/libexec/qemu-kvm</emulator>
    <disk type='file' device='disk'>
      <driver name='qemu' type='raw' cache='none'/>
      <source file='/vm-cache/sdsshost2.img'/>
      <target dev='hda' bus='ide'/>
      <address type='drive' controller='0' bus='0' target='0' unit='0'/>
    </disk>
    <disk type='block' device='disk'>
      <driver name='qemu' type='raw' cache='none' io='native'/>
      <source dev='/dev/sdi'/>
      <target dev='hdb' bus='ide'/>
      <address type='drive' controller='0' bus='0' target='0' unit='1'/>
    </disk>
    <controller type='usb' index='0' model='piix3-uhci'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
    </controller>
    <controller type='pci' index='0' model='pci-root'/>
    <controller type='ide' index='0'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
    </controller>
    <controller type='ide' index='1'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
    </controller>
    <interface type='direct'>
      <mac address='52:54:00:2d:d1:ee'/>
      <source dev='enp4s0f0' mode='vepa'/>
      <model type='rtl8139'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
    </interface>
    <serial type='pty'>
      <target type='isa-serial' port='0'>
        <model name='isa-serial'/>
      </target>
    </serial>
    <console type='pty'>
      <target type='serial' port='0'/>
    </console>
    <input type='mouse' bus='ps2'/>
    <input type='keyboard' bus='ps2'/>
    <graphics type='vnc' port='-1' autoport='yes' listen='127.0.0.1' keymap='en-us'>
      <listen type='address' address='127.0.0.1'/>
    </graphics>
    <video>
      <model type='vga' vram='16384' heads='1' primary='yes'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
    </video>
    <memballoon model='virtio'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
    </memballoon>
  </devices>
</domain>