Home / server / Questions / 1083904
In Process
Cjoerg
Asked: 2021-11-19 02:03:34 +0800 CST

Timer not started by userdata command after reboot

  • 772

Issue description:

On bootup we trigger the service initialization script that is shown below. The script is a part of Instance User Data.

This script copies the necessary service/timer things to systemd folder and starts a timer.

From time to time after reboot our timers are not working and stays in N/A.

The sudo systemctl restart cleanup.timer command does not help.

Only sudo systemctl stop cleanup.timer and then sudo systemctl start cleanup.timer works.

We have this problem not only with a particular timer. We got lot of timers with almost same structure and initialization service. All timers are loaded but some of them can be in active (elapsed) status and not working.

Our setup:

We run Ubuntu 18.04 LTS.

We have this service initialization script:

sudo cp <BASIC PATH>/services/cleanup.service /etc/systemd/system/cleanup.service
sudo cp <BASIC PATH>/services/cleanup.timer /etc/systemd/system/cleanup.timer
sudo systemctl daemon-reload
sudo systemctl start cleanup.timer

And this cleanup.service:

[Unit]
Description=Service to cleanup things
Requires=docker.service
After=docker.service

[Service]
ExecStart=<<SHELL COMMAND>>

And this cleanup.timer:

[Unit]
Description=Timer for service to cleanup things

[Timer]
OnBootSec=1min
OnUnitActiveSec=1800sec
AccuracySec=5sec

[Install]
WantedBy=timers.target

Now check these commands:

> sudo systemctl list-timers
NEXT                         LEFT          LAST                         PASSED       UNIT                         ACTIVATES
n/a                          n/a           n/a                          n/a          cleanup.timer                cleanup.service

> sudo systemctl status cleanup.timer
● cleanup.timer - Timer for service to cleanup things
   Loaded: loaded (/etc/systemd/system/cleanup.timer; disabled; vendor preset: enabled)
   Active: active (elapsed) since Wed 2021-11-17 21:07:22 UTC; 11h ago
  Trigger: n/a

Nov 17 21:07:22 ip-XX-XX-XX-XX systemd[1]: Started Timer for service to cleanup things.

Question:

What could be the reason of this situation and how to avoid it?

ubuntu service systemd systemd-timers

2 Answers

  1. I looks like you forgot to enable the timer.

    systemctl start <unit> starts that timer right now (ie when you first install it and want it to run).

    systemctl enable <unit> doesn't start the unit now but sets up the relevant hooks so the unit is started based on what is in the unit file...

    e.g. timer will start after reboot because of...

    [Install]
WantedBy=timers.target

    running the service initialization script on every boot?

    On bootup we trigger the service initialization script... We have this service initialization script:

    That clearly isn't running successfully because the init script is supposedly running systemctl start cleanup.timer but the cleanup.timer hasn't run or failed in 11 hours.

    So I would look at the logs around your init script to see what is failing and why. Could be your init script is running before docker is available or something like that.

    • 1

  2. I'm not still familiar with systemd but as far as I know PATH environment ain't yet available on boot-up thus some scripts and program set the PATH environment firsts. Assuming your service runs whenever you run it on console, this would be always the case.

    • 0