On my ESXi server, I had to replace a physical disk of my RAID.
Now that disk is replaced and rebuild finished, alarm continue beeping, and I don't understand by why, because everything seems to be optimal:
/opt/lsi/MegaCLI # ./MegaCli -LDInfo -Lall -aALL
Adapter 0 -- Virtual Drive Information:
Virtual Drive: 0 (Target Id: 0)
Name :
RAID Level : Primary-6, Secondary-0, RAID Level Qualifier-3
Size : 2.725 TB
Sector Size : 512
Is VD emulated : No
Parity Size : 930.5 GB
State : Optimal
Strip Size : 256 KB
Number Of Drives : 8
Span Depth : 1
Default Cache Policy: WriteThrough, ReadAhead, Direct, No Write Cache if Bad BBU
Current Cache Policy: WriteThrough, ReadAhead, Direct, No Write Cache if Bad BBU
Default Access Policy: Read/Write
Current Access Policy: Read/Write
Disk Cache Policy : Enabled
Encryption Type : None
PI type: No PI
Is VD Cached: No
Virtual Drive: 1 (Target Id: 1)
Name :
RAID Level : Primary-6, Secondary-0, RAID Level Qualifier-3
Size : 3.637 TB
Sector Size : 512
Is VD emulated : Yes
Parity Size : 3.637 TB
State : Optimal
Strip Size : 256 KB
Number Of Drives : 4
Span Depth : 1
Default Cache Policy: WriteBack, ReadAhead, Cached, No Write Cache if Bad BBU
Current Cache Policy: WriteBack, ReadAhead, Cached, No Write Cache if Bad BBU
Default Access Policy: Read/Write
Current Access Policy: Read/Write
Disk Cache Policy : Enabled
Encryption Type : None
PI type: No PI
Is VD Cached: No
Running a ./MegaCli -PDList -aALL indicate no Media Error Count, but physical drives of my Virtual Drive: 1 indicates "Other Error Count: 6" and I don't know how to have more information about these errors.
I know that I can silence this alarm, but if I doo, alarm will restart on the next reboot.
Is there a way to now why precisely the alarm is On? Is there a way to disable it even after reboot (but of course, not disable entirely this alarm which must turn on after a new disk crash).
Thanks
0 Answers