Home / server / Questions / 300132
Accepted
notpeter
Asked: 2011-08-12 07:14:41 +0800 CST

Netboot Intel Macs without BSDP

  • 772

I have a netboot setup with DeployStudio that works great in my lab, but doesn't work on our main network. After some digging, I believe it's because our network admins are filtering BSDP (Boot Service Discovery Protocol) on our subnet at the switch level.

Is it possible to hard code which server my clients (early 2007 iMac Core2Duos) should boot from without relying on BSDP?

Perhaps relevant details: I do not have control over switch configs or DHCP settings. Client and server are running 10.6 Snow Leopard. The clients see the netboot server advertising itself in the 'Startup Disk' system preferences pane, but when I go to netboot it just leaves me with a flashing globe.

mac-osx mac netboot deploystudio

3 Answers

  1. BSDP is just a a bunch of DHCP vendor-specific options that need to be set/implemented. Are you sure that DHCP is blocked at the switch level and that this isn't just an IP problem - ie are your client and server subnets routed? If so you would need to adjust to this by using DHCP relaying (additionally) to the NetBoot server.

    • 1

  2. You can use bless to netboot a Mac to a specific address.

    From the always excellent Mike Bombich

    sudo bless --netboot --server bsdp://yourServer

    This will take the broadcast element out of netbooting and attempt to netboot directly from the given server. Chances are, your network guys aren't filtering BSDP specifically, but are just cutting out "unauthorized" broadcast traffic. This should get around that.

    • 1
  3. Best Answer

    I know this is a good long while ago since this was asked, but the DeployStudio Assistant can create bootable flash drives or external hard drives that will connect to the server hosting the DeployStudio repository. While that requires plugging things into each host, it is a reliable workaround for NetBoot issues like these.

    • 1