Home / server / Questions / 304935
Accepted
Erik Sjölund
Asked: 2011-08-26 06:47:07 +0800 CST

how do I configure the archttp software for email notifications from an Areca 1880i RAID card

  • 772

I have a 64-bit CentOS 6.0 Linux computer with an Areca 1880i RAID card. The RAID card has its own ethernet port but it is right now not connected to anything. Instead of using that ethernet port for email notifications, I would like to send the email notifications from an ethernet port on the motherboard. I suppose that connecting the ethernet port on the RAID card directly to the internet is a bad idea security-wise because it runs its own firmware-based web server.

On this Areca web page:

http://www.areca.com.tw/support/s_linux/linux.htm

there is download link to the archttp software

http://www.areca.us/support/s_linux/http/x86_64/archttp64.zip

[root@server ~]# wget --quiet http://www.areca.us/support/s_linux/http/x86_64/archttp64.zip
[root@server ~]# unzip archttp64.zip 
Archive:  archttp64.zip
  inflating: archttp64       
[root@server ~]# chmod 755 archttp64 
[root@server ~]# ./archttp64  -h
Usage:

archttp32 [TCP Port#]
To Terminate the archttp: Press CTRL-C 
Command for reconfiguring the archttp: kill -sHUP <archttp's pid>
[root@server ~]#

Here I notice that an empty configuration file was created when I ran ./archttp64 -h

[root@server ~]#  ls -l archttpsrv.conf 
-rw-r--r-- 1 root root 0 2011-08-25 15:56 archttpsrv.conf

I managed to start the web server software

[root@server ~]# ./archttp64 80
Copyright (c) 2004-2009 Areca, Inc. All Rights Reserved.
Areca HTTP proxy server, Version: V1.84, Arclib: 290, Date: Nov  2 2009

Starting HTTP Proxy Server...Please wait(MAX = 5 minutes)
Controller(s) list
-------------------------------------------------------
Controller[1](PCI) : Listen to port[80].
Cfg Assistant : Listen to port[81].
Binding IP: [0.0.0.0]
Note: IP[0.0.0.0] stands for any ip bound to this host.
-------------------------------------------------------

##############################
Press CTRL-C to exit program!!
##############################

I then accessed the web interface provided by archttp64 from my desktop computer by first creating a ssh tunnel

[user@desktop ~]$ ssh -N -L 8080:localhost:80 [email protected]

and then open the URL http://localhost:8080 in a Chromium web browser.

In the web interface I configured the fields for SMTP server and email addresses and chose Information notification as the event level, but no email was sent when I clicked Generate Test Event in the web interface.

How can I get the email notifications to work?

linux centos hardware-raid

1 Answers

  1. Best Answer

    Although, email settings can be edited in the Controller web interface (here chosen to be TCP port 80), that doesn't seem to work. Instead you should edit the email settings in the Cfg Assistant web interface (here chosen to be TCP port 81). Create a ssh tunnel to your server

    [user@desktop ~]$ ssh -N -L 8081:localhost:81 [email protected]

    Note, that you then need to open the URL http://localhost:8081 in a Firefox web browser. The latest Chromium web browser (as of August 2011) will just show you a blank screen.

    Instead of configuring the email settings through a web browser it is also possible to manually edit the file archttpsrv.conf and have it located in the current working directory from where you start archttp64. The file could look like this

    [GENERAL]
BindingIp=127.0.0.1
HTTPPort=80
SMTPPort=25
ScanPci=YES
ScanRs232=NO
ScanInband=NO

[MAIL]
Server=130.237.98.104
Sender=arecaraid
[email protected]
Account=
Password=
MailToName1=arecaraid
MailToName2=
MailToName3=
MailToName4=
[email protected]
MailAddr2=
MailAddr3=
MailAddr4=
EvtLevel=4
NotifyForNoEvent=YES

    where Server is the SMTP server

    • 1