Home / server / Questions / 326027
In Process
chrism2671
Asked: 2011-10-30 12:59:41 +0800 CST

How do you configure QoS for Skype?

  • 772

On our office network (26 people), some users have complained of poor Skype call quality, particularly in the upstream direction. I wanted to ask, how do I identify Skype traffic, considering that it uses a random port, in order that I might prioritise it at the router level?

networking qos skype

4 Answers

  1. I think you are right; Skype uses random non-common outbound ports (greater than 1024) for each session which makes QoS tagging problematic

    But you can use QoS for SIP and provide voice data priority as long as you have SIP Quality of Service-based hardware.

    • 5

  2. You can match skype traffic in a class-map using the configuration below on Cisco routers. To do this, the router uses a feature called NBAR (it looks at layer 4 and higher information in the packet to determine the application.)

    class-map priority
  match protocol skype

    Once matched, you can then give that class higher priority like this:

    policy-map outbound
 class priority
  priority 2000 ! Gives a dedicated 2Mbits/sec
interface Gigabit0/1
 description Outside interface
 service-policy output outbound

    I'm sure other vendors offer similar functionality, but I can't really say for sure.

    • 3

  3. If your computers are on a Windows domain , you can use group policy QoS settings to assign DSCP values to traffic generated by the Skype executable file (skype.exe)(actually, you can do the same with local policy on a workgroup computer, you just might need a registry key added too). DSCP 46 I believe is what's usually used for expedited forwarding. Then you'd need to get QoS setup on any switches and routers the traffic will traverse so that it will honor the DSCP ef markings.

    • 2

  4. Skype for Business already automatically tags its two different kinds of traffic with a Differentiated Services Code Point (DSCP):

    • Audio: EF (Expedited Forwarding, DSCP 46) - low delay, low loss and low jitter
    • Video: AF41 (Assuring Forwarding 41, DSCP 34) - class 4, low drop probability

    Classifying by port is wrong

    Others might suggest trying to classify Skype traffic by ports (to the point that they might even complain that Skype uses random ports that make it more difficult to find).

    Obviously trying to classify Skype traffic by the ports it communicates on is wrong, because then you would mistakenly classify both audio and video into the same priority class - thus defeating the entire purpose of QoS.

    Classifying by Skype.exe is wrong

    Others might also suggest using QoS policy (gpedit.msc) to apply a DSCP policy to Skype.exe. This, again, is also wrong - as you'll mistakenly classify both audio and video as the same priority.

    Skype for Business only

    Unfortunately it is only Skype for Business that tags it's different classes of traffic.

    Microsoft is petty and petulant, and they don't specifically disable the transparent feature that can only help people in the free version.

    Cisco Recommends

    For audio and video Cisco recommends:

    Traffic DSCP Notes
    Voice EF (DSCP 46) No packet loss, 150 ms latency
    Interactive video AF41 (DSCP 34) Packet loss 1%, 150 ms latency
    Streaming video CS4 (DSCP 32) Packet loss 4-5%, 4-5s latency
    • 1