Can't get an HP 8200 Elite Small Form Factor to boot from USB. It's done so in the past & the USB boot drive works in a different machine (HP 8440p laptop).
Have tried upgrading BIOS (from 2.09 to 2.15a, then back to 2.14a) with no luck.
USB drive appears in BIOS "Device Configuration" list, but not in "Boot Order". USB Hard Drive is set highest in the BIOS "Boot Order" list.
What simple, obvious thing am I missing here?
The 8200 uses UEFI, not traditional BIOS; in the Boot Order menu, there are submenus titled "EFI Boot Sources" and "Legacy Boot Sources".
One method for USB booting this machine is to disable the EFI boot sources and enable USB Floppy/CD under Legacy boot sources; we're using the Legacy Boot option to set PXE network boot. It should also possible with an EFI-configured USB drive, but I've not tested that.
EDIT 2 - have heard back from HP - there is a note in the Release Notes for versions from 2.09 on saying you need to Apply Defaults from the File menu in BIOS. This fixed the problem.
It's only required for machines that have been upgraded from a pre-2.09 version - those delivered with 2.09 or higher will already have this done.
EDIT - I've struck this problem with BIOS firmware 2.14 & 2.15, but going to the next version back (2.06) results in success. Still not a fix as we need the higher BIOS level to overcome a USB keyboard/mouse lockout problem during preboot.
Further testing reveals the following:
So, a workaround, but a painful one when we have 500+ machines to image. Might have to sort out PXE.
Will probably report this to HP as well, see if they can replicate it.
Same problem occurs with two totally different USB keys, with the same workaround.
Update BIOS to 2.23 - problem solved
I discovered a bug in BIOS. During start up press ESC -> F10 to go to Computer setup (BIOS settings).
In the BIOS go to STORAGE -> BOOT ORDER
In the "Please select boot device:" menu, you have the following list or similair:
Scroll down the list (by using down arrow key). When you are on the last item on the list, scroll down one more time. Then you will see that there is one more entry in the list, which is not being showed. I do not know what exactly this item is, but it let me boot from the USB stick.
Press F5 to Enable this item. Press F10 to accept then change in the menu.
Then go to FILE -> Save changes and exit. The system will now reboot.
During start up hit ESC again and press F9 in the Startup menu. This takes you to the boot menu and your USB will now be shown in the list and you can install the image.
I noticed that the hidden item which you enable in the BIOS resets by itself. For me it reset after I had installed the image and taken out the USB stick. When trying to reinstall the image once more, I had to re-enable the hidden item in the BIOS, because the memory stick did not show up.
I have ten identical HP Compaq 8200 Elite Minitower PCs, all of them except one boots fine from a legacy USB stick. (BIOS Version 2.10.1208)
The only way I could get the troublesome PC to boot from USB was to disable EFI devices from the BIOS, AND disable the network cards and CD/DVD drive from the boot order menu.
Press and hold ESC on boot-up to enter BIOS > Select 'Computer Setup' > Storage Menu > Boot Order > Highlight 'EFI Boot Sources' and F5 to disable > Same for (all) Network Controller entries > Same for ATAPI CD/DVD Drive > F10 to Accept Goto File Menu > Save Changes and Exit
We have 1000+ identical desktops, and normally we're ghosting desktops with PXE and WoL server, but if anyone tries to boot with bootable USB, I will recommend that you disable in Bios(F10)/Storage/Boot order: "EFI-Boot Sources" (F5-disable);(F10-save change);and under Bios/Storage/Storage Options you have to change the last option "hard drive boot order" to ->USB. Boot now with USB and invoke the boot menu with F9. BTW, My bios version is 2.25.
Good Luck.
This worked for me:
If I press F9 the USB device was not present as option. I had only Boot from EFI File or Notebook Hard Drive/Network. From here the steps are:
-Make sure that Legacy support option in the BIOS is enabled , if not, this will not work. -Turn OFF you Computer -DISCONNECT YOUR USB (In this ORDER!!) -Turn ON and Press F9 to enter to Boot options menu - -Put the flash drive into the USB slot (In this order, Again!!) -Select Boot from EFI file
In the File Explorer the USB will be visible, select it -> bootmgr.efi
FROM: https://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/Compaq-CQ58-251SU-Cannot-boot-from-usb/td-p/6122264
The solution is:
In Boot Order Menu set USB Floppy/CD item to the end of list
And Hard Drive Boot item must be the first item in list