So, I have two Dell PowerConnect 6224 switches (non-stacked). On both of the switches I've taken ports 8 and 9 and assigned them to VLAN 2. The other ends of those ports go to two Windows 2008 R2 Hyper-V host servers (Dell PowerEdge R710). Each server connects to the two switches via a teamed connection for redundancy and speed.
The servers have their IPs as 10.0.2.5 and 10.0.2.6 with a subnet mask of 255.255.255.0.
The VLAN interfaces on both switches have the IPs of 10.0.2.13 and 10.0.2.14 with a subnet mask of 255.255.255.0 as well.
Subnet 10.0.2.0/24 is bound to the VLAN. The MAC addresses of the teamed connections as well as the VLAN interfaces (from the two switches) are also bound to the VLAN.
My problem is that the two servers are unable to ping each other, or the VLAN interface IPs. The switches are also unable to ping the VLAN interface IP of their companion switch and are also unable to ping the IPs of the servers.
I'd really appreciate it if someone could tell me what I'm missing. I'm starting to get really angry with these switches...
UPDATE 1 (for Jim G.)
I removed the team from the ports and assigned them the following IPs: 10.0.2.25, 10.0.2.26, 10.0.2.35 and 10.0.2.36 with a subnet mask of 255.255.255.0. I then bound the MACs of the individual ports to the VLAN.
The servers can now ping to each other fine, but are still unable to ping to the VLAN IPs. Also, the switches are still unable to ping the servers.
The switches are connected via a single cable on ports 23 and 24. The ports are still on the default VLAN 1.
UPDATE 2 (for Jim G.)
I made ports 23 and 24 as trunks and assigned them to VLAN 2. Nothing has changed since the first update. The servers can still ping each other, but not the VLAN IPs. The switches also still can't ping the servers.
In the end I ended up contacting a network consultant. It took about 2 hours, but he figured it out, I just can't recall what it was that he did since it was over a month ago.