The Dell suite is called "Open Manage".
You have a lot of info here on their site.
Basically on a rpm-based distro ( in my experience this works very well with rhel-based distros) you just have to do:
( actually dell recommends srvadmin-all, but if you just want to manage your raid controller this is enough ).
Then you have to look at:
/etc/init.d/dataeng start => starts the services need
omreport storage controller=0
=> info about your controller
omreport storage -? => help for getting info
omconfig storage -? => help for configuring your card
omreport storage vdisk controller=0 => status of virtual disks
omconfig storage controller action=createvdisk ..... => create an array
CAVEAT: on some dell servers ( ie: PE1950 with bnxII nic drivers ), if dataeng starts before then xend service ( if your host is a dom0 xen server ), you will loose network connectivity!!!. If you have the problem take care to configure the dataeng service to start after the xend service.
enjoy
edit: with srvadmin-all you will have various tool which will help you to update firmware, manage drac cards and many things. For Temp monitoring and so on you can do this with ipmi, without the dell packages ( you need however to install ipmi tools and drivers ).
The RAID controller stuff is the never-to-be-sufficiently-damned MegaCli; I don't recall off the top of my head what the BIOS management tool is, but I'd be surprised if it wasn't in the smbios toolset somewhere (I've used that tool to get/set the service tag; never had the need to fiddle with BIOS settings directly, though).
The Dell suite is called "Open Manage". You have a lot of info here on their site. Basically on a rpm-based distro ( in my experience this works very well with rhel-based distros) you just have to do:
( actually dell recommends srvadmin-all, but if you just want to manage your raid controller this is enough ).
Then you have to look at:
CAVEAT: on some dell servers ( ie: PE1950 with bnxII nic drivers ), if dataeng starts before then xend service ( if your host is a dom0 xen server ), you will loose network connectivity!!!. If you have the problem take care to configure the dataeng service to start after the xend service.
enjoy
edit: with srvadmin-all you will have various tool which will help you to update firmware, manage drac cards and many things. For Temp monitoring and so on you can do this with ipmi, without the dell packages ( you need however to install ipmi tools and drivers ).
The RAID controller stuff is the never-to-be-sufficiently-damned MegaCli; I don't recall off the top of my head what the BIOS management tool is, but I'd be surprised if it wasn't in the smbios toolset somewhere (I've used that tool to get/set the service tag; never had the need to fiddle with BIOS settings directly, though).