How do you configure Pacemaker to mount the DRBD data directory on the slave?

how do you get the Slave node of a DRBD pair to mount the data directory so data can be sync'd?

I went through the following guide: https://wiki.edubuntu.org/ClusterStack/Natty#Prepare_Partitions to get the 2-node cluster setup. I have the nodes connected but the data directory on the secondary node is never mounted so the data from node-1 is never replicated to node-2.

Pacemaker "should" be mounting the drive on the Node 2 with this command:

primitive res_fs ocf:heartbeat:Filesystem params device="/dev/drbd0" directory="/mnt/eoacluster" fstype="ext4" # Mounts the filesystem specifying the DRBD device and mount point.

Here is the output of drdb-overview:

Node 1:

0:eoa-ib  Connected Primary/Secondary UpToDate/UpToDate C r---- 
/mnt/eoacluster ext4 99G 188M 94G 1%

Node 2:

0:eoa-ib  Connected Secondary/Primary UpToDate/UpToDate C r----

Below is df -h

Node 1:

Filesystem            Size  Used Avail Use% Mounted on /dev/mapper/DATA-root
                      96G  4.3G   87G   5% /
none                  496M  232K  496M   1% /dev
tmpfs                 501M  3.6M  497M   1% /dev/shm
none                  501M  104K  501M   1% /var/run
none                  501M  4.0K  501M   1% /var/lock
none                  501M     0  501M   0% /lib/init/rw
/dev/sda1             228M   51M  165M  24% /boot
/dev/drbd0             99G  188M   94G   1% /mnt/eoacluster

Node 2:

Filesystem            Size  Used Avail Use% Mounted on /dev/mapper/DATA-root
                       96G  3.0G   88G   4% /
none                  496M  232K  496M   1% /dev
tmpfs                 501M  3.2M  498M   1% /dev/shm
none                  501M  104K  501M   1% /var/run
none                  501M  4.0K  501M   1% /var/lock
none                  501M     0  501M   0% /lib/init/rw
/dev/sda1             228M   51M  165M  24% /boot

/mnt/eoacluster directory does exist on Node 2.

What am I missing? Anyone have any thoughts/suggestions?

Thanks for your help!