Home / server / Questions / 432255
Accepted
grs
Asked: 2012-09-27 08:21:48 +0800 CST

VMware ESXi 5.0.0 hardware monitoring

  • 772

Here is my config:

  • Supermicro X7DBU;
  • 3ware 9650 RAID Controller - driver installed, I use it as main datastore;
  • managing the hypervisor with VMware vSphere Client 5.0.0 on Windows 2003 Server;

I have read that under the Configuration Tab on the client, Under Health Status, I should be able to see more hardware information than is displayed on the screenshot below.

VMware Configuration tab screnshot

What I want is very simple - a way to monitor the hardware status of the server as well as the RAID array state. Now, I have no way to know if a drive has failed, if the temperature is high, etc. I managed to install 3ware RAID CLI (tw_cli) and possibly this would help, but it solves the problem only partially.

The best solution should be a free one, as I have only this server and no money to spend on it.

How I can approach this?

monitoring

1 Answers

  1. Best Answer

    I think you're out of luck. Normally the vendor would provide a CIM driver (or it's there by default for IBM, Dell, etc.) to enable hardware monitoring, but according to Supermicro's FAQ, they're not planning on releasing one.

    • 5