Home / server / Questions / 52631
In Process
pro
Asked: 2009-08-12 02:01:24 +0800 CST

Is it better to use the 192.168.x.x or 10.x.x.x address range for a small business network?

  • 772

For best performance and ease of management, is it better to use 192.168.x.x or 10.x.x.x range of addresses for a small (<50 PCs) business network?

This would correspond to a subnet of 255.255.0.0 and 255.0.0.0 respectively.

networking subnet

12 Answers

  1. RFC 1918 may offer you some guidance on this. At the end of it all though, you've got to design your network to suit, well, your network. If you've only got ~50 devices on the network, then any /24 (255.255.255.0 netmask) will more then suffice

    What do you estimate your growth to be? Will a /24 suit in the future? That's a consideration you need to take into account

    The performance side of things, I'd probably leave any performance impact to be theoretical. And management, well, that may depend on the tool used. Are you just considering IP allocation. Will DHCP work for you? Do you plan on having statically configured devices? You IP address management may start in the form of a spreadsheet. It may be more elaborate, and be database backed. You may want to tie it in to a NMS or something. There's a lot of scope in this area

    • 36

  2. Just because the "default" mask for a space is something large doesn't mean you have to use that mask with that space.

    I would pick a subnet in the 10/8 space, like 10.1.0.0/24. This would give you room to grow in the future (ie add 10.1.1.0/24 for new space in the current site, and 10.2.0.0/24 for an alternate site).

    For larger initial sites, we usually use a /20 network -- that would give you 10.0.0.0 through 10.0.15.255 to play with, or around 4094 individual IP addresses. That way you can allocate DHCP scopes in logical chunks (like 10.0.8.0 through 10.0.9.255) while allocating other specific addresses in specific places (ie we always put printers and networking gear in 10.0.15).

    I would avoid using the whole 10/8 at once because if your network ever grows beyond around 4000 systems the arp noise is going to start taking a non-trivial amount of bandwidth.

    I would avoid 192.168.0/24 and 192.168.1/24 because these are defaults for many consumer-grade home devices, and should you ever have to get into VPN access it will cause problems if your users home networks conflict with the "corporate" one.

    I personally would avoid 192.168 totally because it doesn't flow off the fingers like the low-hanging fruit in 10.x does. On the other hand, if you have a site policy of avoiding 192.168, it makes it easy to use such addresses for local playing (ie VMware).

    • 32

  3. There will be no difference for a such small network.
    Just note that 172.16/12 is also reserved for private use. (172.16.0.0 to 172.31.255.255) (see RFC1918)

    • 14

  4. Use 10.X.X.X it is often generally faster to type than 192.168.X.X. Other than that, there is no different except the number of supported hosts, not going into VLANs.

    • 14

  5. As everyone has mentioned, there is no difference between them.

    You can carve the address space as small or as large as you want. You want as small as you need, but not so small to make it hard to expand.

    The only reason to pick one over the other is if you connect to another network, either by a VPN or by a direct link. You will run into trouble if you have the same address range, so consider what networks you are likely to connect to. Readdressing is not a task to be taken lightly.

    • 11

  6. There is no difference at all for such a small network - certainly any performance differences would be highly theoretical and miniscule.

    • 6

  7. If you have less than 50 PC use a /24 mask. I would go for an 192.168.1.0/24 series out of convention. 192.168.x.x is reserved for class C subnet and for a /24 that would be appropriate.

    raj

    • 1

  8. There's no obvious advantage or disadvantage choosing a range out of 10.0.0.0/8, 172.16.0.0/12 or 192.168.0.0/24 these days (with almost everything capable of using CIDR). If you're looking at a corporate merger down the line, there MAY be some advantage of picking a random starting point in one of the two larger blocks, as that MAY mean you won't have to renumber. However, planning for that isn't really a priority.

    • 1

  9. The real reason to go with 10.x.x.x for a small business network is, as David touches on, is VPN access to the system.

    192.168.1.x is a very commonly used network. Avoid it.

    • 1

  10. It does not mather what network you use no, but there is a advatage in NOT using 10.0.0.X or 192.16.45.x. If you use those networks it can easly create issues if you for some reason need a VPN system, and the network you dail has the same network mask as you.

    • 0