Home / server / Questions / 566999
In Process
OldTroll
Asked: 2014-01-14 13:16:45 +0800 CST

Unable to discover iSCSI targets

  • 772

I have a trio of CentOS 6.4 machines that I'm trying to configure to use iSCSI. Basically two different initiators talking to two different targets on a single host server.

On one machine, "the server", I have two targets defined in /etc/tgt/targets.conf each target points to a different logical disk. The configuration stanzas are nearly identical, varying only in their names and initiator-address fields.

These are the lines from /etc/tgt/targets.conf that aren't commented out.

default-driver iscsi

<target iqn.2013-08.com.example.group:backup>
  backing-store /dev/primary/backup
  initiator-address <ip address>
  incominguser username password
</target>

<target iqn.2013-08.com.example.group:migrations>
  backing-store /dev/primary/migrations
  initiator-address <ip address>
  incominguser username password
</target>

When I run tgt-admin -s I show two targets as expected. However, one of the targets shows only 1 LUN (0 Controller) while the other target shows 2 LUNs (a Controller and a Disk). I have no idea if this is significant.

Sadly, the first target (w/o a disk LUN) is able to be reached by it's initiator and the machine can mount the space and it's all peaches and cream. The second target (w/ the disk LUN) can't be reached by the initiator. When I run iscsiadm -m discovery -t sendtargets -p <ipaddr> I get back iscsiadm: No portals found.

What's worse, even if I when the second target to expect connection from the other address, or remove the initiator-address portion of the configuration, no other systems seem to see the second target.

centos

1 Answers

  1. Error:

    iscsiadm: No portals found.

    Issue: It's a acl issue.

    Solution: Run below command in iSCSI-Target:

    tgtadm --lld iscsi --op bind --mode target --tid 1 -I ALL  #In Target

    Then run below command:

    iscsiadm -m discoverydb -t st --p 192.168.1.5  #It will work... Enjoy.
    • 3