Device file in /dev/mapper/ present even after removing partition with parted

These observations are from CentOS 6.3, 6.4 and 6.5. I have a multipath device with a single partition:

# ls -l /dev/mapper/
total 0
crw-rw---- 1 admin root 10, 57 Dec 22 12:52 control
lrwxrwxrwx 1 admin root      7 Dec 24 12:22 mpatha -> ../dm-0
lrwxrwxrwx 1 admin root      7 Dec 24 12:22 mpathap1 -> ../dm-1

# kpartx -l /dev/mapper/mpatha
mpatha1 : 0 5368719293 /dev/mapper/mpatha 34

Then, parted is used to remove the partition:

# parted /dev/mapper/mpatha
GNU Parted 1.7.1
Using /dev/dm-0
Welcome to GNU Parted! Type 'help' to view a list of commands.

(parted) unit GB                                                          
(parted) p                                                                

Disk /dev/dm-0: 2749GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt

Number  Start   End     Size    File system  Name     Flags
 1      0.00GB  2749GB  2749GB  ext3         primary       

(parted) rm 1                                                             
(parted) q                                                                
Information: Don't forget to update /etc/fstab, if necessary.

However, the device special file /dev/mapper/mpathap1 does not get automatically removed. Running ls -l /dev/mapper/ produces exactly the same output as shown above, while kpartx -l /dev/mapper/mpatha, exits normally ($? = 0) without printing anything.

My question is related to this one. However, there the issue was with no device special file being created in /dev/ while mine is about removal and that too on multipath devices. I am doing certain operations in a script and have already instrumented checks on whether expected device files actually get created or removed and if not then I call kpartx -a -p p <device> (took that hint from /lib/udev/rules.d/40-multipath.rules) or kpartx -d <device> as the case may be. But I have not yet had a satisfying understanding.

When in general, creating partitions on an extra local disk or a portable hard disk using parted works perfectly fine why should anything more be required to be done on disks coming from a SAN? Any information will be appreciated. Thanks!