I'm planning to configure DHCPv6 and DNS server in my network.
- I would like to understand whether both DHCPv4 and DHCPv6 can be configured using isc-dhcp-server service?
- When i tried nslookup domainname it returned the IPv4 address instead of ipv6 address.
- When i tried to configure two IPv6 IP for the two different interfaces for the same machine,only one interface was coming up with the IP.Is there any norms need to be followed when configuring IP?( The network is a private network and i dont need internet connectivity)
Can someone guide me to configure the dhcpv6 and DNS server for IPv6?
Info for #1 Query # This is a very basic subnet declaration.
subnet 10.222.190.0 netmask 255.255.255.192 {
range 10.222.190.54 10.222.190.61;
# option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
}
subnet6 2001:1:1:1::0 netmask 64 {
range6 2001:1:1:1::15 2001:1:1:1::35;
# option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
}
Info for #3 query.
eth1 Link encap:Ethernet HWaddr 08:00:27:f4:63:54
inet addr:10.222.190.55 Bcast:10.222.190.63 Mask:255.255.255.192
inet6 addr: 2001:1:1:1::9/64 Scope:Global
inet6 addr: fe80::a00:27ff:fef4:6354/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:77414 errors:0 dropped:0 overruns:0 frame:0
TX packets:234 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:5207783 (5.2 MB) TX bytes:32631 (32.6 KB)
eth2 Link encap:Ethernet HWaddr 08:00:27:38:fc:87
inet addr:10.222.190.70 Bcast:10.222.190.127 Mask:255.255.255.192
inet6 addr: fe80::a00:27ff:fe38:fc87/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:174 errors:0 dropped:0 overruns:0 frame:0
TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:45035 (45.0 KB) TX bytes:988 (988.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:268 errors:0 dropped:0 overruns:0 frame:0
TX packets:268 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:20504 (20.5 KB) TX bytes:20504 (20.5 KB)
Interface config file
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
#auto eth0
#iface eth0 inet dhcp
# Primary entry node Enterprise NAT
auto eth1
iface eth1 inet static
address 10.222.190.55
netmask 255.255.255.192
network 10.222.190.0
broadcast 10.222.190.63
gateway 10.222.190.1
iface eth1 inet6 static
address 2001:1:1:1::9
#address fd01:1:1:1::9
netmask 64
gateway 2001:1:1:1::1
# Exit Node Access NAT
auto eth2
iface eth2 inet static
address 10.222.190.70
netmask 255.255.255.192
network 10.222.190.64
broadcast 10.222.190.127
gateway 10.222.190.65
iface eth2 inet6 static
address 2001:1:1:2::6
#address fd01:1:1:2::6
netmask 64
gateway 2001:1:1:2::1
IPv6 Planning carried out:
Interface name Eth:IP Address Gateway IP Routing Prefix
ETH2 2001:1:1:1::6 2001:1:1:1::1 64
ETH1 2001:1:1:1::7 2001:1:1:1::1 64
ETH4 2001:1:1:1::8 2001:1:1:1::1 64
ETH1 2001:1:1:1::9 2001:1:1:1::1 64
ETH2 2001:1:1:2::6 2001:1:1:2::1 64
ETH4 2001:1:1:2::7 2001:1:1:2::1 64
ETH3 2001:1:1:2::8 2001:1:1:2::1 64
ETH4 2001:1:1:2::9 2001:1:1:2::1 64
ETH0 2001:1:1:2::10 2001:1:1:2::1 64
ETH0 2001:1:1:2::11 2001:1:1:2::1 64
ETH1 2001:1:1:3::6 2001:1:1:3::1 64
ETH5 2001:1:1:3::7 2001:1:1:3::1 64
ETH4 2001:1:1:3::8 2001:1:1:3::1 64
ETH5 2001:1:1:3::9 2001:1:1:3::1 64
0 Answers