I am attempting to setup a Cisco 887VA to connect out to the internet via a basic ADSL connection. I have configured it to the best of my ability but its the first one I've ever done and I think I may have overlooked something silly. I have triple checked everything and all but the ADSL username/password being incorrect, I cannot see what else it could be.
Could anyone take a look over my config and see if anything stands out please?
Using 3473 out of 262136 bytes
!
! Last configuration change at 08:22:49 UTC Tue May 24 2016 by administrator
!
version 15.4
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
no service timestamps debug uptime
no service timestamps log uptime
service password-encryption
no service dhcp
!
hostname rtr-h003103
!
boot-start-marker
boot system tftp c880data-universalk9-mz.154-3.M5.bin 255.255.255.255
boot system flash:c880data-universalk9-mz.154-3.M5.bin
boot-end-marker
!
!
no logging buffered
no logging console
!
aaa new-model
!
!
aaa authentication login default local
aaa authentication enable default enable
aaa authentication ppp default local
aaa authorization exec default local
!
!
!
!
!
aaa session-id common
memory-size iomem 10
!
crypto pki trustpoint TP-self-signed-1297352779
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1297352779
revocation-check none
rsakeypair TP-self-signed-1297352779
!
!
crypto pki certificate chain TP-self-signed-1297352779
certificate self-signed 01 nvram:IOS-Self-Sig#1.cer
!
!
!
!
!
!
!
!
!
!
!
!
!
ip domain name mydomain.local
ip cef
no ipv6 cef
!
!
cts logging verbose
license udi pid CISCO887VA-K9 sn FCZ1524C3GC
!
!
archive
log config
hidekeys
username administrator privilege 15 secret 5 $1$vd2f$WpvhuZd3aufh0bd0SPUhQ/
username ccpuser privilege 15 secret 5 $1$vqGL$stHJZv4odwJC5LOCvhVpr.
!
!
!
!
!
controller VDSL 0
no cdp run
!
!
!
!
!
!
!
!
!
!
!
interface Ethernet0
description ADSL LAN Interface
ip address 192.168.2.100 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
ip virtual-reassembly in
!
interface ATM0
no ip address
shutdown
no atm ilmi-keepalive
pvc 0/38
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
!
interface FastEthernet0
no ip address
!
interface FastEthernet1
no ip address
!
interface FastEthernet2
no ip address
!
interface FastEthernet3
no ip address
!
interface Vlan1
description 192.168.1.0 LAN (Connected to CCTV Feed)
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
!
interface Dialer0
description Test (ADSL)
ip address 81.136.61.19 255.255.255.254
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname [email protected]
ppp chap password 7 07072055420C0002051D1E1C55
ppp pap sent-username [email protected] password 7 030C5A120A0A384B5C060C1546
ppp ipcp dns request
ppp ipcp route default
no cdp enable
!
interface Dialer1
no ip address
no cdp enable
!
ip forward-protocol nd
no ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
!
ip ftp username root
ip ftp password 7 0201545F06090B240D
ip nat inside source list 10 interface Dialer0 overload
ip nat inside source list natin interface Dialer0 overload
ip nat inside source static 192.168.1.250 81.149.241.71
ip route 0.0.0.0 0.0.0.0 Dialer0
ip ssh version 1
ip ssh pubkey-chain
username administrator
!
ip access-list standard natin
permit 192.168.1.0 0.0.0.255
!
dialer-list 1 protocol ip permit
!
access-list 10 permit 192.168.2.0 0.0.0.255
!
!
!
!
line con 0
privilege level 15
no modem enable
line aux 0
line vty 0 4
privilege level 15
transport input telnet ssh
line vty 5 15
exec-timeout 0 0
privilege level 15
transport input none
!
!
end
Thank you in advance.
Don't worry, I have found the solution! Looks like adding the following worked for me:
I am now able to ping out from the router. Sorted! Thank you.