Here's one of my Solaris 10 servers after a couple of disk replacements in a zpool
pool: volume
state: ONLINE
status: One or more devices is currently being resilvered. The pool will
continue to function, possibly in a degraded state.
action: Wait for the resilver to complete.
scan: resilver in progress since Wed Jul 6 11:43:51 2016
207M scanned out of 36.7T at 1.48M/s, (scan is slow, no estimated time)
207M scanned out of 36.7T at 1.48M/s, 7235h37m to go
13.5M resilvered, 0.00% done
config:
NAME STATE READ WRITE CKSUM
volume ONLINE 0 0 0
raidz2-0 ONLINE 0 0 0
c4t0d0 ONLINE 0 0 1
c4t0d1 ONLINE 0 0 0
c4t0d2 ONLINE 0 0 0
c4t0d3 ONLINE 0 0 0
c4t0d22 ONLINE 0 0 0
c4t0d5 ONLINE 0 0 0
c4t0d6 ONLINE 0 0 0
c4t0d23 ONLINE 0 0 0 (resilvering)
c4t0d15 ONLINE 0 0 0
c4t0d9 ONLINE 0 0 0
c4t0d10 ONLINE 0 0 0
raidz2-1 ONLINE 0 0 4
c4t0d11 ONLINE 0 0 0
c4t0d8 ONLINE 0 0 0 (resilvering)
c4t0d13 ONLINE 0 0 0
c4t0d14 ONLINE 0 0 0
c4t0d20 ONLINE 0 0 0
c4t0d16 ONLINE 0 0 0
c4t0d4 ONLINE 0 0 0
c4t0d18 ONLINE 0 0 2
c4t0d19 ONLINE 0 0 0
c4t0d17 ONLINE 0 0 0
c4t0d21 ONLINE 0 0 0
errors: No known data errors
The scan status returns to 0.00% done every 10-15 minutes, thus re-starting the resilvering. Here is the output of echo "::zfs_dbgmsg" | mdb -k.
iostat -En shows a high (and growing) number of errors on all disks.
zpool iostat -v volume shows normal resilvering activity (write on new disks, read from old disks)
/var/adm/messages is full of messages like this:
Jul 6 12:08:25 raid2 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,3597@4/pci8086,329@0/pci1000,1060@1/sd@0,15 (sd20):
Jul 6 12:08:25 raid2 SCSI transport failed: reason 'reset': retrying command
Jul 6 12:08:28 raid2 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,3597@4/pci8086,329@0/pci1000,1060@1/sd@0,b (sd8):
Jul 6 12:08:28 raid2 Error for Command: read(10) Error Level: Retryable
Jul 6 12:08:28 raid2 scsi: [ID 107833 kern.notice] Requested Block: 21523458 Error Block: 21523458
Jul 6 12:08:28 raid2 scsi: [ID 107833 kern.notice] Vendor: transtec Serial Number: 63881076-00
Jul 6 12:08:28 raid2 scsi: [ID 107833 kern.notice] Sense Key: Unit Attention
Jul 6 12:08:28 raid2 scsi: [ID 107833 kern.notice] ASC: 0x29 (power on, reset, or bus reset occurred), ASCQ: 0x0, FRU: 0x0
Jul 6 12:09:35 raid2 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,3597@4/pci8086,329@0/pci1000,1060@1 (mpt0):
Jul 6 12:09:35 raid2 Disconnected command timeout for Target 0
Jul 6 12:09:39 raid2 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,3597@4/pci8086,329@0/pci1000,1060@1/sd@0,15 (sd20):
Jul 6 12:09:39 raid2 incomplete read- retrying
Jul 6 12:10:46 raid2 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,3597@4/pci8086,329@0/pci1000,1060@1 (mpt0):
Jul 6 12:10:46 raid2 Disconnected command timeout for Target 0
Jul 6 12:10:49 raid2 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,3597@4/pci8086,329@0/pci1000,1060@1/sd@0,e (sd11):
Jul 6 12:10:49 raid2 incomplete read- retrying
Jul 6 12:11:56 raid2 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,3597@4/pci8086,329@0/pci1000,1060@1 (mpt0):
Jul 6 12:11:56 raid2 Disconnected command timeout for Target 0
Jul 6 12:13:03 raid2 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,3597@4/pci8086,329@0/pci1000,1060@1/sd@0,1 (sd35):
Jul 6 12:13:03 raid2 Error for Command: write Error Level: Retryable
Jul 6 12:13:03 raid2 scsi: [ID 107833 kern.notice] Requested Block: 644 Error Block: 644
Jul 6 12:13:03 raid2 scsi: [ID 107833 kern.notice] Vendor: transtec Serial Number: 023CEC5B-00
Jul 6 12:13:03 raid2 scsi: [ID 107833 kern.notice] Sense Key: Unit Attention
Jul 6 12:13:03 raid2 scsi: [ID 107833 kern.notice] ASC: 0x29 (power on, reset, or bus reset occurred), ASCQ: 0x0, FRU: 0x0
Jul 6 12:13:03 raid2 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,3597@4/pci8086,329@0/pci1000,1060@1/sd@0,5 (sd2):
Is there anything I can do to make resilvering finish so that the pool can return to a normal state?
0 Answers