I have a Dell PowerEdge 1950 with a DRAC that I can ssh into but cannot http to. As I understand it, if the logs fill up all space, the only way to recover is to load the latest DRAC firmware. Not only can I not find the firmware, I can't find any instructions on how to update it without the web gui.
Can anyone tell me how to update an old DRAC's firmware without the GUI? I do have physical access and I am running Centos 7. I could install Windows if necessary but would rather not.
$ racadm getsysinfo
RAC Information:
RAC Date/Time = Sat Feb 25 02:20:52 2017
Firmware Version = 1.45
Firmware Build = 09.01.16
Last Firmware Update = NA
Hardware Version = A04
Current IP Address = 192.168.1.120
Current IP Gateway = 192.168.1.1
Current IP Netmask = 255.255.255.0
DHCP Enabled = 0
MAC Address = 00:26:b9:2f:cf:02
Current DNS Server 1 = 0.0.0.0
Current DNS Server 2 = 0.0.0.0
DNS Servers from DHCP = 0
Register DNS RAC Name = 0
DNS RAC Name = rac-7CLWBG1
Current DNS Domain =
System Information:
System Model = PowerEdge 1950
System Revision = [N/A]
System BIOS Version = 2.2.6
BMC Firmware Version = 2.05
Service Tag = xxxxxxxx
Host Name =
OS Name =
Power Status = ON
Watchdog Information:
Recovery Action = None
Present countdown value = 15 seconds
Initial countdown value = 15 seconds
Update here.
You must run the installation from with the installed CentOS system.
On newer hardware, you can install and use DSU which automates FW updates, however the 1950 is not supported so it will probably fail.