Home / server / Questions / 894135
Accepted
JensB
Asked: 2018-01-26 11:15:07 +0800 CST

Only getting 100 Mbit in Hyper V Guest from 1 Gigabit network connection

  • 772

I have a HP Proliant ML350 G6 with two integrated Broadcom NetXTreme Gigabit Ethernet ports running Windows server 2016, updated as of today.

If I share a folder on my hyper v host I can add and remove files at around 90MB/s through the network (both ports deliver the exact same speed).

Here you can see the details on the host. enter image description here

The above picture is on the hyper V host. I have added Network 2 to the hyper v switch manager as Network 2.

Here you can see a picture of the Virtual switch manager and the network connection in the guest.

enter image description here

The problem is that when I share a folder from the guest to the network I can only access that folder att 10MB/s. That is, somewhere along the line my gigabit network is being choked down to a measly 100Mbit. I am not using a legacy connection.

It's not the disk, because on the guest I can shuffle files around between the harddrives at around 100MB/s. Picture below is the guest copying files from one drive to another.

enter image description here

So my question is. What must I change in order to get Gigabit speeds from the Hyper V guest to my network as I'm now only getting 100Mbit from the guest to the network.

In all places I've looked it says Gigabit and the host can deliver on it, so why can't the guest?

Edit: So to clarify: Any network PC can access the hyper V host network file shares at ~100MB/s. The host can read the guest network shares at ~100MB/s. If the same PCs that can access the host att 100MB/s try to access the guest they only get 10MB/s speed when accessing any of the hyper V Guests network shares. Why?

Edit 2: As per request here are more details. Red is the host operationg system. Green is inside the Hyper V machine. enter image description here

Another picture of the Guest network settings. enter image description here

networking

4 Answers

  1. Best Answer

    Verify that you're not using any of the "Legacy NICs" in your Virtual Machines? These are limited to 100mbps. This may be causing the Virtual Network (bound to the physical NIC) to negotiate the lower speed.

    Other things to do: - Update NIC drivers - Force 1gbps operation in Device Manager - Replace the patch lead connecting the problem NIC - check cable. Two threads above had a similar problem solved by replacing a cable.

    http://forums.whirlpool.net.au/archive/1853355

    https://social.technet.microsoft.com/Forums/windowsserver/en-US/60f4924e-2390-4050-a948-7a149376026a/hyperv-host-1gbps-nic-negotiated-at-100-mbps-when-used-for-virtual-switch?forum=winserverhyperv

    • 4
    1. Run a synthetic network test to check the throughput (e.g. iperf).
    2. Check all links on the way from the server to the client. If there's only one link with 100 Mbit/s (possibly a faulty cable) the stream can't move faster.
    3. Check if there's an updated server NIC driver - the ones coming on the install DVD or through Windows Update may have issues.
    • 0

  3. I have encountered this problem several times. I suppose it has to do with a quite infamous bug in Broadcom NIC.

    I have found essentially two solutions -

    First solution - most likely be helpful

    Change the properties of your physical nic and Hyper-v switch: disable VMQ : enter image description here

    Disable all available "Offload options". TCP/UDP CHECKSUM OFFLASD and so on, all the options with "OFFLOAD" in it should be disabled. Try to disable the same "Offload" options in the guest systems.

    Second solution

    Download Broadcom drivers from your server manufactured (Dell, HP). follow this https://www.reddit.com/r/sysadmin/comments/2k7jn5/after_2_years_i_have_finally_solved_my_slow/

    • 0

  4. I checked the link status (Get-Netadapter | select interfaceDescription, Name, Linkspeed) on Powershell and found it running on 100Mbps. Changed the speed settings of the port on my network switch where the server is connected to from Auto and forced it to run on speed 1000. This solved my problem. Check if this helps.

    • 0