Home / server / Questions / 939019
In Process
jamieb
Asked: 2018-11-08 08:33:03 +0800 CST

How to configure iptables for a dial-up VPN with OpenVPN and two interfaces?

  • 772

I have an AWS EC2 instance, running Amazon Linux, that has two Elastic Network Interfaces (ENIs) attached: eth0 and eth1. I am connecting to the public IP on eth0. Everything works great, except I would like to route unencrypted traffic out of the eth1. i.e. Client connects to eth0 to setup an encrypted VPN tunnel, then his/her unencrypted internet traffic is routed in/out of eth1 and back across the tunnel on eth0.

I don't know enough about iptables to get this config working, despite trying for several hours. I'm hoping this is a simple one?

I've installed the latest version of OpenVPN from source and done the following:

  1. Disabled source/dest check on the interfaces
  2. Added the following to "rc.local": echo 1 | sudo tee /proc/sys/net/ipv4/ip_forward
  3. Added the following iptables commands: iptables -A INPUT -i eth0 -m state --state NEW -p tcp --dport 443 -j ACCEPT iptables -A INPUT -i tun+ -j ACCEPT iptables -A FORWARD -i tun+ -j ACCEPT iptables -A FORWARD -i tun+ -o eth0 -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -i eth0 -o tun+ -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -t nat -A POSTROUTING -s 10.18.14.0/24 -o eth0 -j MASQUERADE

My server config file looks like this:

port 443
proto tcp-server
dev tun
tls-server
server 10.18.14.0 255.255.255.0

ca /etc/openvpn/pki/ca.crt
cert /etc/openvpn/pki/vpnserver.crt
key /etc/openvpn/pki/vpnserver.key
dh /etc/openvpn/pki/dh.pem

ifconfig-pool-persist ipp2.txt 
push "redirect-gateway def1 bypass-dhcp"
push "dhcp-option DNS 8.8.8.8"
push "dhcp-option DNS 8.8.4.4"

keepalive 5 15
comp-lzo
max-clients 5
persist-key
persist-tun
status openvpn-status.log
log-append  /var/log/openvpn_road.log
verb 6 
mute 20

tun-mtu 1500
auth SHA1
keysize 128
cipher BF-CBC
centos

1 Answers

  1. You need to setup routing, your rules look ok but you need to change the MASQ rule.

    iptables -t nat -A POSTROUTING -s 10.18.14.0/24 -o eth1 -j MASQUERADE

    I would also suggest some simpler rules for your originating packets.

    # Allows packets from connections initiated by the box or already established
iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
iptables -A OUTPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT

    Now as for the routing I assume you only want the OpenVPN clients to exit via eth1 and not the server it self that I presume has it's default route via eth0. We need to create a new routing table for your OpenVPN clients, we will call it ovpn-inet.

    Edit /etc/iproute2/rt_tables, insert the following at the end and save.

    1 ovpn-inet

    Then create /etc/sysconfig/network-scripts/route-eth1 with the following content, replacing <gw on eth1> and other attributes within <>.

    default via <gw for eth1> dev eth1 table ovpn-inet
<local network on eth1> dev eth1 src <eth1 ip adress> table ovpn-inet

    Now create /etc/sysconfig/network-scripts/rule-eth1

    from <ip address of eth1>/32 table ovpn-inet
from 10.18.14.0/24 table ovpn-inet
to <ip address of eth1>/32 table ovpn-inet

    A suggestion would also be to switch OpenVPN to UDP for the sake of performance. This would also allow you to run a HTTPS server if you ever need it over TCP. Also consider using a tls-crypt in your OpenVPN server config as a simple way of doing a little hardening on your installation.

    proto udp4

    Now restart your networking to make the changes in effect.

    /etc/init.d/network restart
    • 2