Home / server / Questions / 954302
Accepted
Aaron Digulla
Asked: 2019-02-17 12:17:09 +0800 CST

How do I remove a failing disk from a LSI MegaRAID disk group?

  • 772

One of the disks in group 0 (EID:Slot 252:4, DiskID 12) is starting to fail it's smart tests:

  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       1837
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       57

but I can't find any documentation how to remove disks from a disk group.

Do I have to 

storcli /c0/e252/s4 set offline

or rather

storcli /c0/e252/s4 spindown

or both? What's the difference between "spindown" and "offline"? What about

storcli /c0/s4 set missing

What does that do? What does "missing" mean?

And how about the rebuild? Does that start automatically?

If not, then I guess the "start rebuild" command is my friend but why do I have to specify a single disk for that? It would make much more sense to specify the disk group or volume to rebuild, no?

lsi

1 Answers

  1. Best Answer

    According to https://www.45drives.com/wiki/index.php?title=How_do_I_replace_a_failed_drive_with_LSI_9280_cards%3F, the correct sequence is:

    storcli /c0/e252/s4 set offline
storcli /c0/e252/s4 set missing
storcli /c0/eall/s4 spindown     // Note: /eall instead of /e252. No idea why.

    After the first command, the output of storcli /c0/e252/s4 should show Offln. After the last command, it was UGood (Unconfigured Good) for me.

    Note that the second command (set missing) failed for me.

    Afterwards, the rebuild should start if you have a dedicated or global hot spare (DHS or GHS) and enabled automatic rebuild. To verify this, run

    storcli /c0/eall/sall show rebuild

    That will print something like this:

    Controller = 0
Status = Success
Description = Show Drive Rebuild Status Succeeded.


----------------------------------------------------------
Drive-ID    Progress% Status          Estimated Time Left 
----------------------------------------------------------
/c0/e252/s0 -         Not in progress -                   
/c0/e252/s1 -         Not in progress -                   
/c0/e252/s2 -         Not in progress -                   
/c0/e252/s3 -         Not in progress -                   
/c0/e252/s4 -         Not in progress -                   
/c0/e252/s6 18        In progress     -                   
/c0/e252/s7 -         Not in progress -                   
----------------------------------------------------------

    Note the value "In progress" for slot 6 (s6). The second column gives you the percentage of the rebuild (18%).

    I'm using this small script to monitor progress:

    while true ; do clear ; date ; storcli /c0/e252/s6 show rebuild ; sleep 5 ; done

    To locate the failed drive, you can use this command:

    storcli /c0/e252/s4 start locate

    That should make the indicator light of your drive blink.

    • 2