Would someone walk me through the steps to power cycle a Cisco MDS 9506 FC switch? It would help if you would provide a link to relevant documentation for this procedure. I must perform a power maintenance related outage this weekend and I want to make sure I have all the steps handy.
What would be the CLI command I need to execute for this to take effect?
If you've written your config to flash and your hosts are 'expecting' the outage then you can just physically switch the PSUs off or issue a 'reload' command via SSH, serial etc. To power it one, well...power on the PSUs.
If you've not written your config to flash, do that.
1) make sure config is saved 2) remove plug 3) re-insert plug