Home / server / Questions / 564716
Accepted
James
Asked: 2014-01-03 13:25:07 +0800 CST

Slow Network Printing over OpenVPN / Windows Server 2008

  • 772

Our setup is as follows:

Two offices (A and B) connected with OpenVPN Access Server.

One Windows Server 2008 R2 Standard

  1. Housed in remote datacenter.
  2. Terminals at both offices connect through RDP in order to use a particular piece of software concurrently.
  3. Network Connected printers (Deployed with GPO) that are connected to separate terminals at each office (and shared) are used with this software to print things throughout the day.

We are experiencing extremely slow printing times. Opening printer properties can take 30-60 seconds and printing times range from 30-180 seconds with no apparent reason. File sizes remain < 1mb.

This happens with each of our printers. All different models.

The server massively underutilized with a 6-core AMD, 16GB ram, 4x 120GB SSDs, and a 100 megabit port. Our VPN does not seem to be a bottleneck either.

I've been attempting to find ways to increase print speed. So far no success. What can you advise?

windows-server-2008

2 Answers

  1. Best Answer

    I don't have any advice to offer on root cause. Nothing jumps out.

    If I were troubleshooting this I'd sniff the traffic. Nothing beats seeing the packets on the wire.

    I would capture network traffic between the Terminal Server computer and one of the computers hosting the shared printers while the problem is occurring. Since you're seeing "slowness" just opening the Properties sheet for the printer I think capturing the traffic generated when you try to do that should at least generate a lead.

    Minimally, you'd do a capture at a time when traffic between the Terminal Server and the PC hosting the shared printer would be at a minimum, so that you can use a simple capture filter like host <ip of print server PC> (assuming pcap filter syntax). It would be even better if you could find a time when you're the only use on the Terminal Server such that you can capture (and feel confident that your actions are generating) all non-RDP traffic to/from the Terminal Server just to make sure you're not missing attempted DNS resolutions, IPv6 connection attempts, etc.

    If you're uncomfortable putting third-party sniffer software on the server grab Microsoft Network Monitor. (I'd like to recommend the new Microsoft Message Analyzer but I just haven't had enough time to get comfortable with it yet.)

    • 2

  2. It's been a long time. However, I would like to encourage anyone who is having such an issue to ensure their VPN is a site-to-site setup. After switching to UBNT EdgeRouter with Site-to-Site OpenVPN, printing time is practically instantaneous.

    • 0