I am Perl beginner. I wanted to use Log::Log4perl module as I am familiar how it works in Java. I used cpanm script to download module, but I ran it without "sudo". Then it installed this module to my dir /home/amer/perl5. Afterwards, I installed it as sudoer, but I want to remove installation in my home dir to avoid any conflicts in future. How can I do that? Here is my cmdline execution stack.
Thanks and Regards!
I need to install CPAN and some Perl modules automatically in a Scientific Linux (RHEL) installation script. Unfortunately the specific modules I want (at least one of them) cannot be found as RPM:s as far as I've seen.
So I need to install CPAN, configure it automatically (or with a config file) and then install the wanted modules (including dependencies) automatically as well.
This doesn't seem like a very unusual requirement, but I haven't seen any really good documentation on this. The problem is that whenever CPAN is launched for the first time an interactive configuration runs. Can this be skipped somehow? And how do I launch module installations directly from the command line?
If I'm not wrong the first step to start with the command line with cpan is next
# perl -MCPAN -e shell
but I don't know what I should do for looking a module, can you help me, what should I write to find next module?:
I'm trying to install the XML::Parser perl module using CPAN and can't get it to work. Below is the output that is being displayed by CPAN which appears to indicate that Expat is the issue.
Geting this installed is critical for us and I'm at a loss as to what to do next. Any help would be greatly appreciated!
cpan[1]> install XML::Parser
CPAN: Storable loaded ok (v2.21)
Going to read '/root/.cpan/Metadata'
Database was generated on Fri, 15 Apr 2011 16:29:49 GMT
Running install for module 'XML::Parser'
Running make for C/CH/CHORNY/XML-Parser-2.40.tar.gz
CPAN: Digest::SHA loaded ok (v5.48)
CPAN: Compress::Zlib loaded ok (v2.03)
Checksum for /root/.cpan/sources/authors/id/C/CH/CHORNY/XML-Parser-2.40.tar.gz ok
Scanning cache /root/.cpan/build for sizes
............................................................................DONE
CPAN: Archive::Tar loaded ok (v1.68)
XML-Parser-2.40
XML-Parser-2.40/Changes
XML-Parser-2.40/Makefile.PL
XML-Parser-2.40/MANIFEST
XML-Parser-2.40/META.yml
XML-Parser-2.40/Parser.pm
XML-Parser-2.40/README
XML-Parser-2.40/Expat
XML-Parser-2.40/Expat/encoding.h
XML-Parser-2.40/Expat/Expat.pm
XML-Parser-2.40/Expat/Expat.xs
XML-Parser-2.40/Expat/Makefile.PL
XML-Parser-2.40/Expat/typemap
XML-Parser-2.40/inc
XML-Parser-2.40/inc/Devel
XML-Parser-2.40/inc/Devel/CheckLib.pm
XML-Parser-2.40/Parser
XML-Parser-2.40/Parser/LWPExternEnt.pl
XML-Parser-2.40/Parser/Encodings
XML-Parser-2.40/Parser/Encodings/big5.enc
XML-Parser-2.40/Parser/Encodings/euc-kr.enc
XML-Parser-2.40/Parser/Encodings/ibm866.enc
XML-Parser-2.40/Parser/Encodings/iso-8859-2.enc
XML-Parser-2.40/Parser/Encodings/iso-8859-3.enc
XML-Parser-2.40/Parser/Encodings/iso-8859-4.enc
XML-Parser-2.40/Parser/Encodings/iso-8859-5.enc
XML-Parser-2.40/Parser/Encodings/iso-8859-7.enc
XML-Parser-2.40/Parser/Encodings/iso-8859-8.enc
XML-Parser-2.40/Parser/Encodings/iso-8859-9.enc
XML-Parser-2.40/Parser/Encodings/Japanese_Encodings.msg
XML-Parser-2.40/Parser/Encodings/koi8-r.enc
XML-Parser-2.40/Parser/Encodings/README
XML-Parser-2.40/Parser/Encodings/windows-1250.enc
XML-Parser-2.40/Parser/Encodings/windows-1251.enc
XML-Parser-2.40/Parser/Encodings/windows-1252.enc
XML-Parser-2.40/Parser/Encodings/windows-1255.enc
XML-Parser-2.40/Parser/Encodings/x-euc-jp-jisx0221.enc
XML-Parser-2.40/Parser/Encodings/x-euc-jp-unicode.enc
XML-Parser-2.40/Parser/Encodings/x-sjis-cp932.enc
XML-Parser-2.40/Parser/Encodings/x-sjis-jdk117.enc
XML-Parser-2.40/Parser/Encodings/x-sjis-jisx0221.enc
XML-Parser-2.40/Parser/Encodings/x-sjis-unicode.enc
XML-Parser-2.40/Parser/Style
XML-Parser-2.40/Parser/Style/Debug.pm
XML-Parser-2.40/Parser/Style/Objects.pm
XML-Parser-2.40/Parser/Style/Stream.pm
XML-Parser-2.40/Parser/Style/Subs.pm
XML-Parser-2.40/Parser/Style/Tree.pm
XML-Parser-2.40/samples
XML-Parser-2.40/samples/canonical
XML-Parser-2.40/samples/canontst.xml
XML-Parser-2.40/samples/ctest.dtd
XML-Parser-2.40/samples/REC-xml-19980210.xml
XML-Parser-2.40/samples/xmlcomments
XML-Parser-2.40/samples/xmlfilter
XML-Parser-2.40/samples/xmlstats
XML-Parser-2.40/t
XML-Parser-2.40/t/astress.t
XML-Parser-2.40/t/cdata.t
XML-Parser-2.40/t/decl.t
XML-Parser-2.40/t/defaulted.t
XML-Parser-2.40/t/encoding.t
XML-Parser-2.40/t/ext.ent
XML-Parser-2.40/t/ext2.ent
XML-Parser-2.40/t/external_ent.t
XML-Parser-2.40/t/file.t
XML-Parser-2.40/t/finish.t
XML-Parser-2.40/t/foo.dtd
XML-Parser-2.40/t/namespaces.t
XML-Parser-2.40/t/parament.t
XML-Parser-2.40/t/partial.t
XML-Parser-2.40/t/skip.t
XML-Parser-2.40/t/stream.t
/bin/tar: Read 3072 bytes from -
XML-Parser-2.40/t/styles.t
CPAN: File::Temp loaded ok (v0.22)
CPAN: Parse::CPAN::Meta loaded ok (v1.40)
CPAN.pm: Going to build C/CH/CHORNY/XML-Parser-2.40.tar.gz
Expat must be installed prior to building XML::Parser and I can't find
it in the standard library directories. Install 'expat-devel' package with your
OS package manager.
Or you can download expat from:
http://sourceforge.net/projects/expat/
If expat is installed, but in a non-standard directory, then use the
following options to Makefile.PL:
EXPATLIBPATH=... To set the directory in which to find libexpat
EXPATINCPATH=... To set the directory in which to find expat.h
For example:
perl Makefile.PL EXPATLIBPATH=/home/me/lib EXPATINCPATH=/home/me/include
Note that if you build against a shareable library in a non-standard location
you may (on some platforms) also have to set your LD_LIBRARY_PATH environment
variable at run time for perl to find the library.
Checking if your kit is complete...
Looks good
Writing Makefile for XML::Parser::Expat
Writing Makefile for XML::Parser
Could not read metadata file. Falling back to other methods to determine prerequisites
cp Parser/Encodings/x-sjis-cp932.enc blib/lib/XML/Parser/Encodings/x-sjis-cp932.enc
cp Parser/Encodings/koi8-r.enc blib/lib/XML/Parser/Encodings/koi8-r.enc
cp Parser/Encodings/iso-8859-7.enc blib/lib/XML/Parser/Encodings/iso-8859-7.enc
cp Parser/Encodings/ibm866.enc blib/lib/XML/Parser/Encodings/ibm866.enc
cp Parser/Style/Tree.pm blib/lib/XML/Parser/Style/Tree.pm
cp Parser/Encodings/iso-8859-9.enc blib/lib/XML/Parser/Encodings/iso-8859-9.enc
cp Parser/Encodings/x-euc-jp-unicode.enc blib/lib/XML/Parser/Encodings/x-euc-jp-unicode.enc
cp Parser/Encodings/README blib/lib/XML/Parser/Encodings/README
cp Parser/Encodings/euc-kr.enc blib/lib/XML/Parser/Encodings/euc-kr.enc
cp Parser/Encodings/windows-1250.enc blib/lib/XML/Parser/Encodings/windows-1250.enc
cp Parser/Encodings/windows-1252.enc blib/lib/XML/Parser/Encodings/windows-1252.enc
cp Parser/Encodings/big5.enc blib/lib/XML/Parser/Encodings/big5.enc
cp Parser/Encodings/windows-1255.enc blib/lib/XML/Parser/Encodings/windows-1255.enc
cp Parser/Encodings/iso-8859-3.enc blib/lib/XML/Parser/Encodings/iso-8859-3.enc
cp Parser/Encodings/Japanese_Encodings.msg blib/lib/XML/Parser/Encodings/Japanese_Encodings.msg
cp Parser/Encodings/x-euc-jp-jisx0221.enc blib/lib/XML/Parser/Encodings/x-euc-jp-jisx0221.enc
cp Parser/Style/Subs.pm blib/lib/XML/Parser/Style/Subs.pm
cp Parser/Encodings/iso-8859-8.enc blib/lib/XML/Parser/Encodings/iso-8859-8.enc
cp Parser/Encodings/iso-8859-4.enc blib/lib/XML/Parser/Encodings/iso-8859-4.enc
cp Parser/Encodings/x-sjis-jdk117.enc blib/lib/XML/Parser/Encodings/x-sjis-jdk117.enc
cp Parser/Encodings/iso-8859-2.enc blib/lib/XML/Parser/Encodings/iso-8859-2.enc
cp Parser/Encodings/x-sjis-unicode.enc blib/lib/XML/Parser/Encodings/x-sjis-unicode.enc
cp Parser/LWPExternEnt.pl blib/lib/XML/Parser/LWPExternEnt.pl
cp Parser/Style/Objects.pm blib/lib/XML/Parser/Style/Objects.pm
cp Parser.pm blib/lib/XML/Parser.pm
cp Parser/Style/Debug.pm blib/lib/XML/Parser/Style/Debug.pm
cp Parser/Encodings/windows-1251.enc blib/lib/XML/Parser/Encodings/windows-1251.enc
cp Parser/Encodings/x-sjis-jisx0221.enc blib/lib/XML/Parser/Encodings/x-sjis-jisx0221.enc
cp Parser/Style/Stream.pm blib/lib/XML/Parser/Style/Stream.pm
cp Parser/Encodings/iso-8859-5.enc blib/lib/XML/Parser/Encodings/iso-8859-5.enc
make[1]: Entering directory `/root/.cpan/build/XML-Parser-2.40-xNvsuv/Expat'
cp Expat.pm ../blib/lib/XML/Parser/Expat.pm
/usr/bin/perl /usr/share/perl5/ExtUtils/xsubpp -noprototypes -typemap /usr/share/perl5/ExtUtils/typemap -typemap typemap Expat.xs > Expat.xsc && mv Expat.xsc Expat.c
gcc -c -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables -DVERSION=\"2.40\" -DXS_VERSION=\"2.40\" -fPIC "-I/usr/lib/perl5/CORE" Expat.c
Expat.xs:12:19: error: expat.h: No such file or directory
Expat.xs:60: error: expected specifier-qualifier-list before ‘XML_Parser’
Expat.xs:111: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘nsdelim’
Expat.xs:194: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘ms’
Expat.xs:197: error: expected ‘)’ before ‘parser’
Expat.xs:249: error: expected ‘)’ before ‘*’ token
Expat.xs:286: error: expected ‘)’ before ‘parser’
Expat.xs: In function ‘characterData’:
Expat.xs:470: error: ‘CallbackVector’ has no member named ‘char_sv’
Expat.xs: In function ‘startElement’:
Expat.xs:482: error: ‘CallbackVector’ has no member named ‘ns’
Expat.xs:488: error: ‘CallbackVector’ has no member named ‘st_serial’
Expat.xs:490: error: ‘CallbackVector’ has no member named ‘skip_until’
Expat.xs:491: error: ‘CallbackVector’ has no member named ‘st_serial’
Expat.xs:491: error: ‘CallbackVector’ has no member named ‘skip_until’
Expat.xs:494: error: ‘CallbackVector’ has no member named ‘skip_until’
Expat.xs:498: error: ‘CallbackVector’ has no member named ‘st_serial_stackptr’
Expat.xs:498: error: ‘CallbackVector’ has no member named ‘st_serial_stacksize’
Expat.xs:499: error: ‘CallbackVector’ has no member named ‘st_serial_stacksize’
Expat.xs:501: error: ‘CallbackVector’ has no member named ‘st_serial_stack’
Expat.xs:501: error: ‘CallbackVectorâ has no member named âst_serial_stackâ
Expat.xs:502: error: ‘CallbackVector’ has no member named ‘st_serial_stacksize’
Expat.xs:505: error: ‘CallbackVector’ has no member named ‘st_serial_stack’
Expat.xs:505: error: ‘CallbackVector’ has no member named ‘st_serial_stackptr’
Expat.xs:505: error: ‘CallbackVector’ has no member named ‘st_serial’
Expat.xs:508: error: ‘CallbackVector’ has no member named ‘nstab’
Expat.xs:508: error: ‘CallbackVector’ has no member named ‘nslst’
Expat.xs:512: error: ‘CallbackVector’ has no member named ‘start_sv’
Expat.xs:512: error: ‘CallbackVector’ has no member named ‘start_sv’
Expat.xs:512: error: ‘CallbackVector’ has no member named ‘start_sv’
Expat.xs:512: error: ‘CallbackVector’ has no member named ‘start_sv’
Expat.xs:512: error: ‘CallbackVector’ has no member named ‘start_sv’
Expat.xs:512: error: ‘CallbackVector’ has no member named ‘start_sv’
Expat.xs:512: error: ‘CallbackVector’ has no member named ‘start_sv’
Expat.xs:512: error: ‘CallbackVector’ has no member named ‘start_sv’
Expat.xs:512: error: ‘CallbackVector’ has no member named ‘start_sv’
Expat.xs:530: error: ‘CallbackVector’ has no member named ‘nstab’
Expat.xs:530: error: ‘CallbackVector’ has no member named ‘nslst’
Expat.xs:539: error: ‘CallbackVector’ has no member named ‘start_sv’
Expat.xs:545: error: ‘CallbackVector’ has no member named ‘context’
Expat.xs:547: error: ‘CallbackVector’ has no member named ‘ns’
Expat.xs:548: error: ‘CallbackVector’ has no member named ‘new_prefix_list’
Expat.xs:485: warning: unused variable ‘pnslst’
Expat.xs:484: warning: unused variable ‘pnstab’
Expat.xs:481: warning: unused variable ‘pcontext’
Expat.xs: In function ‘endElement’:
Expat.xs:559: error: ‘CallbackVector’ has no member named ‘context’
Expat.xs:561: error: ‘CallbackVector’ has no member named ‘st_serial_stackptr’
Expat.xs:565: error: ‘CallbackVector’ has no member named ‘skip_until’
Expat.xs:565: error: ‘CallbackVector’ has no member named ‘end_sv’
Expat.xs:565: error: ‘CallbackVector’ has no member named ‘end_sv’
Expat.xs:565: error: ‘CallbackVector’ has no member named ‘end_sv’
Expat.xs:565: error: ‘CallbackVector’ has no member named ‘end_sv’
Expat.xs:565: error: ‘CallbackVector’ has no member named ‘end_sv’
Expat.xs:565: error: ‘CallbackVector’ has no member named ‘end_sv’
Expat.xs:565: error: ‘CallbackVector’ has no member named ‘end_sv’
Expat.xs:565: error: ‘CallbackVector’ has no member named ‘end_sv’
Expat.xs:565: error: ‘CallbackVector’ has no member named ‘end_sv’
Expat.xs:575: error: ‘CallbackVector’ has no member named ‘end_sv’
Expat.xs:581: error: ‘CallbackVector’ has no member named ‘st_serial_stackptr’
Expat.xs: In function ‘processingInstruction’:
Expat.xs:601: error: ‘CallbackVector’ has no member named ‘proc_sv’
Expat.xs: In function ‘commenthandle’:
Expat.xs:621: error: ‘CallbackVector’ has no member named ‘cmnt_sv’
Expat.xs: In function ‘startCdata’:
Expat.xs:633: error: ‘CallbackVector’ has no member named ‘startcd_sv’
Expat.xs:640: error: ‘CallbackVector’ has no member named ‘startcd_sv’
Expat.xs: In function ‘endCdata’:
Expat.xs:653: error: ‘CallbackVector’ has no member named ‘endcd_sv’
Expat.xs:660: error: ‘CallbackVector’ has no member named ‘endcd_sv’
Expat.xs: At top level:
Expat.xs:668: warning: type defaults to ‘int’ in declaration of ‘XML_Char’
Expat.xs:668: error: expected ‘;’, ‘,’ or ‘)’ before ‘*’ token
Expat.xs:688: warning: type defaults to ‘int’ in declaration of ‘XML_Char’
Expat.xs:688: error: expected ‘;’, ‘,’ or ‘)’ before ‘*’ token
Expat.xs: In function ‘defaulthandle’:
Expat.xs:720: error: ‘CallbackVector’ has no member named ‘dflt_sv’
Expat.xs: At top level:
Expat.xs:729: error: expected declaration specifiers or ‘...’ before ‘XML_Content’
Expat.xs: In function ‘elementDecl’:
Expat.xs:738: warning: implicit declaration of function ‘generate_model’
Expat.xs:738: error: ‘model’ undeclared (first use in this function)
Expat.xs:738: error: (Each undeclared identifier is reported only once
Expat.xs:738: error: for each function it appears in.)
Expat.xs:738: warning: assignment makes pointer from integer without a cast
Expat.xs:747: error: ‘CallbackVector’ has no member named ‘eledcl_sv’
Expat.xs: In function ‘attributeDecl’:
Expat.xs:785: error: ‘CallbackVector’ has no member named ‘attdcl_sv’
Expat.xs: In function ‘entityDecl’:
Expat.xs:818: error: ‘CallbackVector’ has no member named ‘entdcl_sv’
Expat.xs: In function ‘doctypeStart’:
Expat.xs:844: error: ‘CallbackVector’ has no member named ‘doctyp_sv’
Expat.xs: In function ‘doctypeEnd’:
Expat.xs:861: error: ‘CallbackVector’ has no member named ‘doctypfin_sv’
Expat.xs: In function ‘xmlDecl’:
Expat.xs:887: error: ‘CallbackVector’ has no member named ‘xmldec_sv’
Expat.xs: In function ‘unparsedEntityDecl’:
Expat.xs:915: error: ‘CallbackVector’ has no member named ‘unprsd_sv’
Expat.xs: In function ‘notationDecl’:
Expat.xs:956: error: ‘CallbackVector’ has no member named ‘notation_sv’
Expat.xs: At top level:
Expat.xs:960: error: expected ‘)’ before ‘parser’
Expat.xs:1115: error: expected declaration specifiers or ‘...’ before ‘XML_Encoding’
Expat.xs: In function ‘unknownEncoding’:
Expat.xs:1146: warning: unused variable ‘count’
Expat.xs:1167: error: ‘info’ undeclared (first use in this function)
Expat.xs: In function ‘recString’:
Expat.xs:1187: error: ‘CallbackVector’ has no member named ‘recstring’
Expat.xs:1188: error: ‘CallbackVector’ has no member named ‘recstring’
Expat.xs:1191: error: ‘CallbackVector’ has no member named ‘recstring’
Expat.xs: In function ‘suspend_callbacks’:
Expat.xs:1197: error: ‘CallbackVector’ has no member named ‘char_sv’
Expat.xs:1197: error: ‘CallbackVector’ has no member named ‘char_sv’
Expat.xs:1197: error: ‘CallbackVector’ has no member named ‘char_sv’
Expat.xs:1197: error: ‘CallbackVector’ has no member named ‘char_sv’
Expat.xs:1197: error: ‘CallbackVector’ has no member named ‘char_sv’
Expat.xs:1197: error: ‘CallbackVector’ has no member named ‘char_sv’
Expat.xs:1197: error: ‘CallbackVector’ has no member named ‘char_sv’
Expat.xs:1197: error: ‘CallbackVector’ has no member named ‘char_sv’
Expat.xs:1197: error: ‘CallbackVector’ has no member named ‘char_sv’
Expat.xs:1198: warning: implicit declaration of function ‘XML_SetCharacterDataHandler’
Expat.xs:1198: error: ‘CallbackVector’ has no member named ‘p’
Expat.xs:1199: error: ‘XML_CharacterDataHandler’ undeclared (first use in this function)
Expat.xs:1199: error: expected ‘)’ before numeric constant
Expat.xs:1202: error: ‘CallbackVector’ has no member named ‘proc_sv’
Expat.xs:1202: error: ‘CallbackVector’ has no member named ‘proc_sv’
Expat.xs:1202: error: ‘CallbackVector’ has no member named ‘proc_sv’
Expat.xs:1202: error: ‘CallbackVector’ has no member named ‘proc_sv’
Expat.xs:1202: error: ‘CallbackVector’ has no member named ‘proc_sv’
Expat.xs:1202: error: ‘CallbackVector’ has no member named ‘proc_sv’
Expat.xs:1202: error: ‘CallbackVector’ has no member named ‘proc_sv’
Expat.xs:1202: error: ‘CallbackVector’ has no member named ‘proc_sv’
Expat.xs:1202: error: ‘CallbackVector’ has no member named ‘proc_sv’
Expat.xs:1203: warning: implicit declaration of function ‘XML_SetProcessingInstructionHandler’
Expat.xs:1203: error: ‘CallbackVector’ has no member named ‘p’
Expat.xs:1204: error: ‘XML_ProcessingInstructionHandler’ undeclared (first use in this function)
Expat.xs:1204: error: expected ‘)’ before numeric constant
Expat.xs:1207: error: ‘CallbackVector’ has no member named ‘cmnt_sv’
Expat.xs:1207: error: ‘CallbackVector’ has no member named ‘cmnt_sv’
Expat.xs:1207: error: ‘CallbackVector’ has no member named ‘cmnt_sv’
Expat.xs:1207: error: ‘CallbackVector’ has no member named ‘cmnt_sv’
Expat.xs:1207: error: ‘CallbackVector’ has no member named ‘cmnt_sv’
Expat.xs:1207: error: ‘CallbackVector’ has no member named ‘cmnt_sv’
Expat.xs:1207: error: ‘CallbackVector’ has no member named ‘cmnt_sv’
Expat.xs:1207: error: ‘CallbackVector’ has no member named ‘cmnt_sv’
Expat.xs:1207: error: ‘CallbackVector’ has no member named ‘cmnt_sv’
make[1]: *** [Expat.o] Error 1
make[1]: Leaving directory `/root/.cpan/build/XML-Parser-2.40-xNvsuv/Expat'
make: *** [subdirs] Error 2
CHORNY/XML-Parser-2.40.tar.gz
/usr/bin/make -- NOT OK
CPAN: YAML loaded ok (v0.72)
Running make test
Can't test without successful make
Running make install
Make had returned bad status, install seems impossible
Failed during this command:
CHORNY/XML-Parser-2.40.tar.gz : make NO
I tried to install the Perl DateTime module by running "cpan" and typing "install DateTime" at the prompt. After a lot of processing and printing I got this message:
Compilation failed in require at (eval 907) line 3.
# Looks like your test died before it could output anything.
t/41cldr_format.........dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1-101
Failed 101/101 tests, 0.00% okay
t/42duration_class......ok
t/pod-coverage..........skipped
all skipped: Test::Pod::Coverage 1.08 required for testing POD coverage
t/pod...................skipped
all skipped: Test::Pod 1.14 required for testing POD
Failed Test Stat Wstat Total Fail Failed List of Failed
-------------------------------------------------------------------------------
t/07compare.t 255 65280 26 18 69.23% 18-26
t/17set_return.t 255 65280 7 12 171.43% 2-7
t/19leap_second.t 255 65280 172 302 175.58% 22-172
t/23storable.t 255 65280 21 42 200.00% 1-21
t/24from_object.t 255 65280 10 8 80.00% 7-10
t/30future_tz.t 255 65280 5 10 200.00% 1-5
t/34set_tz.t 255 65280 8 16 200.00% 1-8
t/36invalid_local.t 255 65280 4 5 125.00% 1-4
t/37local-add.t 255 65280 26 52 200.00% 1-26
t/38local-subtract.t 255 65280 127 254 200.00% 1-127
t/41cldr_format.t 255 65280 101 202 200.00% 1-101
3 tests and 9 subtests skipped.
Failed 11/44 test scripts, 75.00% okay. 462/3296 subtests failed, 85.98% okay.
make: *** [test_dynamic] Error 255
DROLSKY/DateTime-0.50.tar.gz
/usr/bin/make test -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
reports DROLSKY/DateTime-0.50.tar.gz
Running make install
make test had returned bad status, won't install without force
Failed during this command:
DROLSKY/DateTime-0.50.tar.gz : make_test NO
What does it mean and how can I fix it?
EDIT: I am running Fedora.