Home / user-1249

setatakahashi's questions

Martin Hope
setatakahashi
Asked: 2011-06-21 09:14:29 +0800 CST
  • 4

I have a server that had a failed drive and a drive in Predictive Failure. I replaced the failed drive and it was rebuilding.

root@linux:~ # hpacucli ctrl all show config

Smart Array E200 in Slot 3           (sn: PA6C9%%BFTWZMV)

   array A (SAS, Unused Space: 0 MB)

      logicaldrive 1 (410.1 GB, RAID 5, Recovering, 1.4% complete)

      physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 146 GB, Predictive Failure)
      physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 146 GB, Rebuilding)
      physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 146 GB, OK)
      physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS, 146 GB, OK)

Now the LUN is stuck at the status Ready for Rebuild. Is there anything that I can do besides rebooting the server?

root@linux:~ # hpacucli ctrl all show config

Smart Array E200 in Slot 3           (sn: PA6C9%%BFTWZMV)

   array A (SAS, Unused Space: 0 MB)

      logicaldrive 1 (410.1 GB, RAID 5, Ready for Rebuild)

      physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 146 GB, Predictive Failure)
      physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 146 GB, Predictive Failure)
      physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 146 GB, OK)
      physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS, 146 GB, OK)
hp-proliant hp-smart-array
Martin Hope
setatakahashi
Asked: 2009-05-09 03:34:43 +0800 CST
  • 62

I have a Linux server that whenever I connect it shows me the message that changed the SSH host key:

$ ssh root@host1 @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ @ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ IT IS POSSIBLE THAT SOMEONE IS DOING SOMETHING NASTY! Someone could be eavesdropping on you right now (man-in-the-middle attack)! It is also possible that the RSA host key has just been changed. The fingerprint for the RSA key sent by the remote host is 93:a2:1b:1c:5f:3e:68:47:bf:79:56:52:f0:ec:03:6b. Please contact your system administrator. Add correct host key in /home/emerson/.ssh/known_hosts to get rid of this message. Offending key in /home/emerson/.ssh/known_hosts:377

RSA host key for host1 has changed and you have requested strict checking. Host key verification failed.

It keeps me for a very few seconds logged in and then it closes the connection.

host1:~/.ssh # Read from remote host host1: Connection reset by peer Connection to host1 closed.

Does anyone know what's happening and what I could do to solve this problem?

security ssh rsa man-in-the-middle hostkey