Where can I find the procedure for replacing a disk in an EMC CX2-30 san.
Amber light showing on one disk, NaviSphere shows the disk status as "Requested Bypass"
The affected LUN is in a RAID 5 configuration.
There are two hot spares in the unowned LUN, one has status "Hot spare ready". The other has status "Enabled".
Afternoon, I'm running Plone 2.5.3 on SLES 10. With a separate Apache server (192.168.6.80) using mod rewrite to access Plone.
Recently been experiencing slow performance loading pages. When I checked the ZOPE events.log there are lots of:
2011-02-09T13:20:18 ERROR ZServer uncaptured python exception, closing channel <ZServer.HTTPServer.zhttp_channel connected 192.168.6.80:42815 at 0x2aaaacaf97a0 channel#: 349 requests:> (socket.error:(104, 'Connection reset by peer') [/opt/Plone-2.5.3/Python-2.4.4/lib/python2.4/asynchat.py|initiate_send|219] [/opt/Plone-2.5.3/lib/python/ZServer/medusa/http_server.py|send|417] [/opt/Plone-2.5.3/Python-2.4.4/lib/python2.4/asyncore.py|send|332])
I found a post which suggested this error is just caused by users navigaing away from a page before the request is complete, can anyone confirm this is normal Zope behaviour? Maybe I just need to reduce the log level?
Cheers,
Nathan.
I have a Dell 1950 server with two 70Gb SAS drives. Both drives are showing an amber flashing light, and OpenManage displays both drives in a predictive fail state.
Dell have sent me to two new drives under warranty, the new drives are 300Gb.
1) What is the procedure for replacing the dives, I would like to keep the server running without restarting if possible.
2) Can I RAID controller cope with different capacity drives?
Cheers,
Nathan.
I have this in my apace error.log:
[Fri Sep 18 08:10:54 2009] [notice] child pid 9178 exit signal Segmentation fault (11)
[Fri Sep 18 08:11:41 2009] [notice] child pid 9187 exit signal Segmentation fault (11)
[Fri Sep 18 08:12:12 2009] [notice] child pid 9204 exit signal Segmentation fault (11)
[Fri Sep 18 08:12:13 2009] [notice] child pid 9202 exit signal Segmentation fault (11)
[Fri Sep 18 08:14:45 2009] [notice] child pid 9251 exit signal Segmentation fault (11)
It started the same day I made an addition to the vhost.conf file. So I reverted back to the original file did a apache2ctl restart. Unfortunately it's still occurring.
Apache seems to be serving pages OK.
Any ideas?
Cheers,
Nathan.