Home / user-241316

Archemar's questions

Martin Hope
Archemar
Asked: 2016-02-05 01:42:40 +0800 CST
  • 1

I am looking for command for console for Hitachi CR210.

this is the equivalent of HP ILO, where you can connect to ILO IP with ssh, have access to console (if OS is in text mode), issue power off/on hosts, simulate a blade withdrawal and all.

login to host give me the following

host:~ # ssh -l user01 8.8.8.8
[email protected]'s password:
# inactivity_timer[min] : 10
S0051
ALL RIGHTS RESERVED, COPYRIGHT (C), 2011, 2012, HITACHI, LTD.
Chassis ID        : 9 T999999999
Firmware Revision :
$ ?
E0025 : Command is invalid.
S0005 : Command was invalid.
S0000 : Command was finished.

I have tried replacing ? by h,he,help,info but to no avail.

maintenance
Martin Hope
Archemar
Asked: 2014-10-15 23:30:25 +0800 CST
  • 2

I have a system with 3 volume group (vg00, vg01 and vgdata).

I need to make a bootable tape, so I used the command below ad backup completed successfully.

make_tape_recovery -a /dev/rmt/0mn -x inc=vg00 -x inc=vg01

(this is not the exact syntax of -x inc=vg00 but that is not the problem).

Now, I would like to know, when booting on the tape, will it give me one vg (vg00) or two vg (vg00+vg01) ?

I suppose there is enough disk space to hold the data.

backup-restoration