We are using LSI 1068E raid chipset with SAS drives.
We had added new drives to the system, and tried to create new raid volume with the lsiutil, unfortunately the creation failed. The problem is that now we do not have the new raid volume and disks 'disappeared' and are not available as targets for raid.
Lsiutil option 8 (scan for devices) does not display these disks at all.
lsiutil option 16 (display attached devices) does list them as targets.
lsiutil option 21+30 (create raid) does not list these disks.
Just after insrting them to enclosure these disks appeared in the system, as expected. During the raid creation kernel logged:
Mar 4 08:40:02 kilo kernel: [57555.687946] mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 2 id=0
Mar 4 08:40:02 kilo kernel: [57555.687978] mptbase: ioc0: PhysDisk has been created
Mar 4 08:40:02 kilo kernel: [57555.695438] scsi target0:0:2: mptsas: ioc0: RAID Hidding: fw_channel=0, fw_id=0, physdsk 2, sas_addr 0x5000c50008ebe5fd
for both of them, again as expected. Unfortunately they did not appear back even though the volume was not created.
The same situation is in the controller's bios after a reboot.
Taking the disks out and inserting in different slots did not help, either.
Has someone seen a similar problem? And knows how to 'get back' our disks?
