Max's questions

i have an exchange server for which i wanted to redirect outbound messages throught a fortimail antispam box. i created a new send connector for a test domain and used the ip of the antispam as the smart host.

i am already using the antispam for inbound messages.

the message dont get out off the antispam. (delivery delayed message from exchange) after a few moment the internal ip was blacklistest. i cannot connect to smtp port , the session is immediately closed

i have the following message in the logs :

Log Type    AntiSpam
Date    2016-06-29
Time    10:54:46
Client  mail.domain.local [192.0.10.48]
Message FortiGuard-AntiSpam identified spam ip at connection: score=3
Log ID  0300019726
Level   information
Type    spam
Destination IP  192.168.99.1

i tryed to create a RELAY access control policy to allow relaying from this ip. i also added the ip into the system white list. But i still cannot connect to the antispam box on port 25

how can i get out of this?

Thanks

i'm running esxi 5.5u2 standalone with 3 datastores , (local , netapp (nfs) and synology (nfs )

There are two Gigabit network adapters configured. One per vswitch.

One for storage and the other for management. the two adapter and Nas are on the same physical switch.

i want to copy a vm from the netapp to the synology but the speed is very slow (8 -10 MB /sec) instead of 30 - 60 MB /sec

Individual test show speed topping at 60 MB sec

Where is the bottleneck and how to avoid it?

(see the following performance graph to understand.)

Thank you