Home / user-33394

Milde's questions

Martin Hope
Milde
Asked: 2012-05-09 05:06:40 +0800 CST
  • 1

I want to send a Non-Maskable Interrupt (NMI) to the system over the HP iLO2/3 cli. Unfortunately I don't know the correct syntax or target:

hpiLO-> nmi

status=2 status_tag=COMMAND PROCESSING FAILED error_tag=COMMAND SYNTAX ERROR You must specify an NMI target.

Maybe you can help me out, thanks in advance!

hp hp-proliant ilo
Martin Hope
Milde
Asked: 2011-08-19 01:40:26 +0800 CST
  • 1

I tried to reboot server over IPMI and the integrated service processor/BMC. It worked for IBM server with an Integrated Management Module (IMM), but failed with HP iLO2 (FW v2.05).

I used ipmiutil.exe for Windows so far and would be able to use ipmitoolon a Linux machine.

Following line worked for an IBM IMM/BMC (shut down server):

ipmiutil reset -d -N 192.168.1.123 -U adminaccount -P adminpassword

Using this for a HP iLO2 I get:

ipmilan_open_session error, rv = -15

ireset: powering down ...
set_boot_options ccode 80, resp[0] = c2, resp[1] =  e4
ireset: IPMI_Reset error 128
ipmiutil reset, Invalid Session Handle or Empty Buffer

Any hints? Somebody tried this before?

Thanks, milde.

hp-proliant electrical-power ipmi ilo ipmitool