Syahmul Aziz's questions

The error as shown in the 2 pictures below:

The configurations for named.conf and the zones files as shown below:

Update 1: This is the result after applying the suggestions from "alveso".

The error has been resolved, but I still can't ping my own domain www.p0864868.com (10.0.0.1) nor can I do host or nslookup lookups as shown on previous pictures.

I also attached my the changes that I made to my named.conf as well as my resolve.conf configs as shown below:

Update 2: I turned on logging by typing "rndc querylog" with the output as below when I pinged p0864868.com

Update 3: changed permission of 10-0-0.zone and p086868.zone to 644 named:named Still can't ping www.p0864868.com or execute host command. It says something like Network Unreachable.

I don't understand why does it display this message: "Parse error: parse error in C:\wamp\www\aaa\tftp scripts\testTFTP_r3.php on line 45"

each time I tried to execute the php scripts as below:

<?
//telnet

require_once "PHPTelnet_config.php";


$telnet = new PHPTelnet();

$result = $telnet->Connect('192.168.100.30','','');

if ($result == 0) { 
    //echo $username1;
    $telnet->DoCommand($username1, $result);
    // NOTE: $result may contain newlines
    //echo $result;
    $telnet->DoCommand($password1, $result);
    // NOTE: $result may contain newlines
    //echo $result;
    // say Disconnect(0); to break the connection without explicitly logging out
    //$telnet->Disconnect(); 
    $telnet->DoCommand("super", $result);
    $telnet->DoCommand("super", $result);
    $telnet->DoCommand("enable", $result);
    $telnet->DoCommand("cisco", $result);
    $telnet->DoCommand("copy tftp startup-config", $result);
    $telnet->DoCommand("192.168.100.99", $result);
    }
    //here is the command to specify which lab

    switch(3){
        case 1:
            $telnet->DoCommand("R3_lab1_Config", $result);
            break;

        case 2:
            $telnet->DoCommand("R3_lab2_Config_PPP", $result);
            break;

        case 3:
            $telnet->DoCommand("R3_lab3_Config_SSH_NTP_Syslog", $result);
            break;
        default :
            echo "something went wrong with the selections" ;
            break;
    }
?>

Please assist. Thank you in advance

Currenntly I am only allowing 1 IP address to access HTTPS service from my DIGI. It is shown as below for example:

invert 10.0.0.3/255.255.255.255 HTTPS DROP

The problem is that I would like to give access to let say 2 to 3 more hosts which are for example 10.0.0.4/24 and 10.0.0.10/24. I have no idea on how to do it and the DIGI manual example does not explain much about it.

Please kindly assist.

Thank you in advance.

Currently, I am giving users access to DIGI passport port through HTTPS.

The problem is, user will be prompted some kind of certificate prompt. How do I get rid of that problem, so that users can straight away access the port through HTTPS without having to click on the prompt? (in details please)

Thank you in advance

Currently, I would like to call Tool Command Language Scripts that is located in server A.

When a user surf a website that is hosted in server B. When, a user click on a button for example, I would like the php file to execute the Tcl scripts that is located in server B.

How do I do that?

Thank you in advance.

I need to download EXPECT package using teacup on my ubuntu client.

I have installed Active Tcl 8.5. I also have installed EXPECT for LINUX.

But, I don't have EXPECT package to work with Tcl Dev Kit.

Can someone tell me in details on how can I get teacup working in order to download EXPECT package?

Thank you in advance

I am trying to convert EXPECT script that is located in an ubuntu client to a .exe script so that I can execute the EXPECT file from web browser using javascript.

Can anyone guide me on how to convert the .exp file to a .exe?

Thank you in advance

I need a cisco router commands to end a user session at console port.

The commands will be issued to the router using another software periodically.

The purpose is to end a user session connected to the console port of the router.

Thank you in advance.

I would like to load scripts automatically based on certain triggers/conditions into cisco routers.

Can anyone provide me a link or tell me how to do it?

what does the scripts does? 1. Once the user authenticate to a NAS(cisco router), it will grab its userID and password. Then, it will do background authentication for the next router the users wish to use. 2. The script also will disconnect a user from NAS/cisco router once his timing ends.

I am only interested on how to load the scripts into the router automatically.

I am currently using CISCO ACS for AAA server. The problem is I am required to do background authentication for users that are stored in SQL. So, when those users login, their usernames and passwords need to be catched for background authentication.

I need to load the scripts automatically to cisco routers which I am still have no idea on how to do it.

Thank you in advance